MCU0805PD1502DP500 Vishay

MCS 0402 HP, MCT 0603 HP, MCU 0805 HP www.vishay.com Vishay Beyschlag High Power Thin Film Chip Resistors FEATURES Operating temperature up to 175 C Rated dissipation up to 0.4 W for size 0805 AEC-Q200 qualified Superior temperature cycling robustness Advanced sulfur resistance verified according to ASTM B 809 Material categorization: for definitions of compliance Automotive grade high power MC HP thin film chip resistors please see www.vishay.com/doc 99912 are the perfect choice for most fields of modern electronics where high power dissipation, reliability and stability is of major concern. The permissible power rating is specified APPLICATIONS with up to 400 mW and allows replacement of larger case Automotive sizes with next smaller ones. Typical applications include power electronics in automotive and industrial appliances. Industrial High power and high temperature applications Replacement for larger case sizes TECHNICAL SPECIFICATIONS DESCRIPTION MCS 0402 HP MCT 0603 HP MCU 0805 HP Imperial size 0402 0603 0805 Metric size code RR1005M RR1608M RR2012M Resistance range 47 to 100 k 1 to 100 k 1 to 100 k Resistance tolerance 1 % 0.5 % 0.1 % Temperature coefficient 50 ppm/K 25 ppm/K (1) Rated dissipation P 0.200 W 0.250 W 0.400 W 85 Operating voltage, U AC /DC 50 V 75 V 150 V max. RMS (1) Permissible film temperature, 175 C F max. Operating temperature range -55 C to 175 C Note (1) Please refer to APPLICATION INFORMATION below APPLICATION INFORMATION When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Revision: 28-Nov-17 Document Number: 28916 1 For technical questions, contact: thinfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 MCS 0402 HP, MCT 0603 HP, MCU 0805 HP www.vishay.com Vishay Beyschlag MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION OPERATION MODE POWER ADVANCED TEMPERATURE P P 70 85 MCS 0402 HP 0.200 W 0.200 W Rated dissipation MCT 0603 HP 0.250 W 0.250 W MCU 0805 HP 0.400 W 0.400 W Operating temperature range -55 C to 155 C -55 C to 175 C Permissible film temperature, 155 C 175 C F max. MCS 0402 HP 47 to 100 k 47 to 100 k MCT 0603 HP 1 to 100 k 1 to 100 k Max. resistance change at rated dissipation for resistance range, MCU 0805 HP 1 to 100 k 1 to 100 k R/R after: 1000 h 0.2 % 0.3 % 8000 h 0.4 % - Note The presented operation modes do not refer to different types of resistors, but actually show examples of different loads, that lead to different film temperatures and different achievable load-life stability (drift) of the resistance value. A suitable low thermal resistance of the circuit board assembly must be safeguarded in order to maintain the film temperature of the resistors within the specified limits. Please consider the application note Thermal Management in Surface-Mounted Resistor Applications (www.vishay.com/doc 28844) for information on the general nature of thermal resistance. TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES 50 ppm/K 1 % 47 to 100 k E24 E96 MCS 0402 HP 0.5 % 47 to 100 k 25 ppm/K E24 E192 0.1 % 47 to 100 k 50 ppm/K 1 % 1 to 100 k E24 E96 MCT 0603 HP 0.5 % 10 to 100 k 25 ppm/K E24 E192 0.1 % 47 to 100 k 50 ppm/K 1 % 1 to 100 k E24 E96 MCU 0805 HP 0.5 % 10 to 100 k 25 ppm/K E24 E192 0.1 % 47 to 100 k Revision: 28-Nov-17 Document Number: 28916 2 For technical questions, contact: thinfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000