MCW 0406 AT, MCW 0612 AT - Professional www.vishay.com Vishay Beyschlag Professional Wide Terminal Thin Film Chip Resistors FEATURES Rated dissipation P up to 1 W 85 Superior temperature cycling robustness Operating temperature up to 175 C for 1000 h AEC-Q200 qualified Advanced sulfur resistance verified according to ASTM B 809 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 MCW AT Professional Wide Terminal Resistors are the perfect choice for most fields of modern professional power APPLICATIONS measurement electronics where reliability, stability, power dissipation, and robust design is of major concern. Automotive Besides extremely high power ratings, the MCW AT is Industrial characterized by extraordinary temperature cycling High power and high temperature applications robustness, verified through extensive testing. Typical Replacement for larger case sizes applications include power electronics in automotive and industrial appliances. TECHNICAL SPECIFICATIONS DESCRIPTION MCW 0406 AT MCW 0612 AT Imperial size 0406 0612 Metric size code RR1016M RR1632M Resistance range 1 to 100 k 10 to 100 k Resistance tolerance 0.5 % 1 % 0.5 % 1 % Temperature coefficient 25 ppm/K 50 ppm/K 25 ppm/K 50 ppm/K (1) Rated dissipation P 0.3 W 1.0 W 85 Operating voltage, U AC /DC 50 V 75 V max. RMS (1) Permissible film temperature, 175 C 175 C F max. (1) Operating temperature range -55 C to 175 C -55 C to 175 C Permissible voltage against ambient (insulation): 1 min U 75 V 100 V ins Note (1) Please refer to APPLICATION INFORMATION, see below. APPLICATION INFORMATION When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Revision: 05-Dec-16 Document Number: 28796 1 For technical questions, contact: thinfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 MCW 0406 AT, MCW 0612 AT - Professional www.vishay.com Vishay Beyschlag MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION OPERATION MODE STANDARD POWER ADVANCED TEMPERATURE P P P 70 70 85 Rated dissipation MCW 0406 AT 0.2 W 0.25 W 0.3 W (1) MCW 0612 AT 0.5 W 0.75 W 1.0 W Operating temperature range -55 C to 125 C -55 C to 155 C -55 C to 175 C Permissible film temperature, 125 C 155 C 175 C F max. MCW 0406 AT 1 to 100 k 1 to 100 k 1 to 100 k Max. resistance change MCW 0612 AT 10 to 100 k 10 to 100 k 10 to 100 k at rated dissipation for 1000 h 0.1 % 0.2 % 0.4 % resistance range, 8000 h 0.2 % 0.4 % - R/R, after: 225 000 h 0.6 % - - Notes The presented operation modes do not refer to different types of resistors, but actually show examples of different loads, that lead to different film temperatures and different achievable load-life stability (drift) of the resistance value. A suitable low thermal resistance of the circuit board assembly must be safeguarded in order to maintain the film temperature of the resistors within the specified limits. Please consider the application note Thermal Management in Surface-Mounted Resistor Applications (www.vishay.com/doc 28844) for information on the general nature of thermal resistance. (1) Specified power rating requires a thermal resistance R 90 K/W of the circuit board assembly. th The resistance value is influenced by the resistance of the terminations. The exact resistance value of the soldered part on the PCB may deviate depending on e.g. solder quantity, pad layout, and soldering method. The resistance value of the unmounted part can be verified for resistors < 10 by a 4-point probe on the top side terminations as shown below. Y X Fig. 1 DIMENSIONS FOR 4-POINT PROBE X Y TYPE / SIZE (m) (m) MCW 0406 AT 870 600 MCW 0612 AT 1300 1240 Revision: 05-Dec-16 Document Number: 28796 2 For technical questions, contact: thinfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000