MDP 01, 03, 05 www.vishay.com Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available Available 0.160 (4.06 mm) maximum seated height and rugged, molded case construction Thick film resistive elements Low temperature coefficient (-55 C to +125 C) 100 ppm/C Reduces total assembly costs Available Compatible with automatic inserting equipment Wide resistance range (10 to 2.2 M) Uniform performance characteristics Available in tube pack Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL POWER RATING TEMPERATURE TCR RESISTANCE (1) (3) (2) MODEL/ ELEMENT TOLERANCE COEFFICIENT TRACKING WEIGHT SCHEMATIC RANGE NO. OF P % (-55 C to +125 C) (-55 C to +125 C) g 70 C PINS W ppm/C ppm/C 01 0.125 10 to 2.2M 50 MDP 14 03 0.250 10 to 2.2M 1, 2, 5 100 50 1.3 05 0.125 Consult factory 100 01 0.125 10 to 2.2M 50 MDP 16 03 0.250 10 to 2.2M 1, 2, 5 100 50 1.5 05 0.125 Consult factory 100 Notes (1) For resistor power ratings at +25 C see derating curves (2) Tighter tracking available (3) 2 % standard, 1 %, and 5 % available GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MDP1403100RGD04 (preferred part numbering format) M D P 1 4 0 3 1 0 0 R G D 0 4 GLOBAL RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING SPECIAL MODEL VALUE CODE MDP 14 = 14 pin 01 = Bussed E04 = Lead (Pb)-free, tube Blank = Standard R = F = 1 % 16 = 16 pin 03 = Isolated (Dash Number) K = k G = 2 % D04 = Tin/lead, tube 00 = Special (up to 3 digits) M = M J = 5 % From 1 to 999 10R0 = 10 S = Special as applicable 680K = 680 k Z = 0 Jumper 1M00 = 1.0 M 0000 = 0 Jumper Historical Part Number Example: MDP1403101G (will continue to be accepted) MDP 14 03 101 G D04 HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: MDP1405121CGD04 (preferred part numbering format) M D P 1 4 0 5 1 2 1 C G D 0 4 GLOBAL RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING SPECIAL MODEL VALUE CODE MDP 14 = 14 pin 05 = Dual 3 digit impedance code, F = 1 % E04 = Lead (Pb)-free, tube Blank = Standard 16 = 16 pin terminator followed by alpha G = 2 % (Dash Number) D04 = Tin/lead, tube modifier (see Impedance J = 5 % (up to 3 digits) Codes table) From 1 to 999 as applicable Historical Part Number Example: MDP1405221271G (will continue to be accepted) MDP 14 05 221 271 G D04 HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE CODE PACKAGING Note For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc 31542). Revision: 12-Sep-13 Document Number: 31511 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 MDP 01, 03, 05 www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 0.310 0.010 (7.87 0.254) 0.120 0.005 A 0.010 (0.254) (3.05 0.127) 0.250 0.005 (6.35 0.127) 0.030 (0.762) Typ. Pin 1 0.010 + 0.005 Identification - 0.002 0.130 + 0.015 0.075 0.015 0.018 0.003 (0.254 + 0.127 - 0.010 (1.90 0.381) (0.457 0.076) - 0.051) Pin 1 (3.30 + 0.381 - 0.254) 0.290 Min. 0.100 0.010 0.320 Nom. (2.54 0.254) B 0.010 (0.254) 0.050 0.005 0.360 Max. Non-Accumulative Tol. (1.27 0.127) (7.37 Min. Spaces 8.13 Nom. 9.14 Max.) GLOBAL MODEL A B C MDP 14 0.750 (19.05) 0.600 (15.24) 6 MDP 16 0.850 (21.59) 0.700 (17.78) 7 TECHNICAL SPECIFICATIONS PARAMETER UNIT MDP14 MDP16 Package Power Rating (Maximum at +70 C) W 1.73 1.92 Voltage Coefficient of Resistance V < 50 ppm typical eff Dielectric Strength V 200 AC Insulation Resistance > 10 000M minimum Operating Temperature Range C -55 to +125 Storage Temperature Range C -55 to +150 MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215 Solderability Per MIL-STD-202, method 208E Body Molded epoxy Terminals Solder plated leads Weight 14 pin = 1.3 g 16 pin = 1.5 g IMPEDANCE CODES CODE R ( ) R ()CODE R ( ) R () 1 2 1 2 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K Note For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc 31530). Revision: 12-Sep-13 Document Number: 31511 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000