Not Recommended for New Designs, Use MKP385 MKP1840 www.vishay.com Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Pulse operations SMPS and thyristor circuits Storage, filter, timing, sample and hold circuits QUICK REFERENCE DATA Capacitance range 4700 pF to 10 F Capacitance tolerances 20 % (M), 10 % (K), 5 % (J) Climatic testing class according to IEC 60068 55/100/56 Operating temperature range -55 C to +100 C Dielectric Polypropylene film Electrodes Metallized Extended metallized film Construction (refer to general information following the link in note below table) Flame retardant plastic case, epoxy resin sealed Coating UL-class 94 V-0 Leads Tinned wire Rated voltages (U ) 100 V , 160 V , 250 V , 400 V , 630 V R DC DC DC DC DC Measured at 100 V after one minute DC Insulation resistance For C 0.33 F: 25 000 M (U 100 V ) R DC Permissible AC voltages (RMS) up to 60 Hz 63 V , 100 V , 160 V , 220 V , 250 V AC AC AC AC AC Test voltage (electrode/electrode) 1.6 x U for 2 s R Measured at 100 V after one minute DC Time constant For C > 0.33 F: 30 000 s minimum value -6 Temperature coefficient -250 x 10 /C (typical value) Capacitance drift Up to +40 C, < 0.5 % for a period of two years Dielectric absorption 0.05 % (typical value) according to IEC 60068-2-21 At +85 C: U = 1.0 U C R Derating for DC and AC category voltage U C At +100 C: U = 0.7 U C R Self inductance ~ 6 nH measured with 2 mm long leads Pull test on leads 30 N in direction of leads according to IEC 60068-2-21 Note For further details, please refer to the general information available at www.vishay.com/doc 26033 Revision: 13-Oct-14 Document Number: 26061 1 For technical questions, contact: dc-film vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000Not Recommended for New Designs, Use MKP385 MKP1840 www.vishay.com Vishay Roederstein DIMENSIONS in millimeters l w Marking max. max. h max. 0.6 -1 6 0.4 Pitch 0.4 0.8 LEAD DIAMETER WPITCH d t 0.5 0.05 - 5 to 7.5 0.6 0.06 - 10 0.6 0.06 615 0.8 0.08 > 6 15 0.8 0.08 < 16 22.5 to 37.5 1.0 0.1 16 22.5 to 37.5 MAXIMUM PULSE RISE TIME MAXIMUM PULSE RISE TIME dV/dt V/s PCM (mm) 100 V 160 V 250 V 400 V 630 V DC DC DC DC DC 5 390 --- - 7.5 - 240 300 - - 10 - 175 220 380 510 15 - 100 125 200 280 22.5 - 60 75 120 160 27.5 - 45 60 95 120 37.5 - 30 40 65 85 Note If the maximum pulse voltage is less than the rated voltage higher dV/dt values can be permitted. DISSIPATION FACTOR tan MEASURED AT C 0.1 F 0.1 F < C 1.0 F C > 1.0 F -4 -4 -4 1 kHz 10 x 10 10 x 10 40 x 10 -4 -4 10 kHz 10 x 10 10 x 10 - -4 100 kHz 10 x 10 -- Maximum values Revision: 13-Oct-14 Document Number: 26061 2 For technical questions, contact: dc-film vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000