MLV0805E30703T Vishay

MLV0805E3 www.vishay.com Vishay BCcomponents SMD 0805 Multilayer Varistor FEATURES Surface mount multilayer surge suppressor Inherent bidirectional clamping Excellent energy / volume ratio Suitable for reflow soldering Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Over-voltage and transient voltage protection: QUICK REFERENCE DATA Data lines and I/O port protection PARAMETER VALUE UNIT Protection against ESD transients Maximum continuous voltage On-board protection of ICs and transistors DC 5.6 to 38.0 V Modem protection AC 4.0 to 30.0 V LCD protection Maximum clamping voltage 15.5 to 77 V DESCRIPTION at 1 A Capacitance range Size 0805 (2012M) multilayer chip varistor with NiSn 80 to 860 pF (at 1 MHz) terminations. Maximum energy (10/1000 s) 0.1 to 0.3 J PACKAGING Maximum peak current 30 to 100 A Available in 8 mm paper tape, component pitch 4 mm on Operating temperature range -55 to 125 C 180 mm reels containing 4000 pieces. Weight 0.011 g ELECTRICAL DATA AND ORDERING INFORMATION MAXIMUM MAXIMUM BREAKDOWN MAXIMUM TYPICAL PART WORKING VOLTAGE CLAMPING PEAK VOLTAGE ENERGY CAPACITANCE NUMBER VOLTAGE CURRENT V V V V I E CSAP RMS DC b C P M V V V V A J pF MLV0805E3 1 mA 1 A, 8/20 s 8/20 s 10/1000 s 1 MHz 4.0 5.6 7.1 to 9.3 15.5 40 0.1 860 0403T 7.0 9.0 11.0 to 14.0 20.0 40 0.1 585 0703T 11.0 14.0 16.5 to 20.3 30.0 40 0.1 280 1103T 13.0 18.0 23.0 to 28.0 42.0 100 0.3 550 1305T 25.0 30.0 37.0 to 46.0 65.0 30 0.1 80 2503T 30.0 38.0 42.3 to 51.7 77.0 80 0.3 220 3005T Notes Sinusoidal voltage assumed as normal operating condition. If a non-sinusoidal voltage is present, the crest voltage x 0.707 should be used for type selection Breakdown voltage at a current of 1 mA, measured according to 4.5 of IEC 61051-1 Parts are not recommended for automotive applications Revision: 08-Jan-2021 Document Number: 29109 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 MLV0805E3 www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters L WT L and L 1 2 3 T W 2.0 0.2 1.25 0.2 1.1 max. 0.4 0.3 L L L 2 4 3 L 1 RECOMMENDED FOOTPRINT in millimeters C AB C A 1.4 1.2 3.4 B V/I CHARACTERISTICS Max. leakage current Max. clamping voltage Axis Title 10000 3005 100 2503 1305 1103 0703 0403 1000 10 100 1 10 -5 -4 -3 -2 -1 2 10 10 10 10 10 110 10 Current (A) Revision: 08-Jan-2021 Document Number: 29109 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 2nd line Voltage (V) 1st line 2nd line