MMA02040C8203FB000 Vishay

MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag Professional Thin Film MELF Resistors FEATURES Approved according to EN 140401-803 AEC-Q200 qualified Advanced metal film technology Excellent overall stability: exceeds class 0.25 Best in class pulse load capability Intrinsic sulfur resistance Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 MMU 0102, MMA 0204, and MMB 0207 professional thin film MELF resistors are the perfect choice for most fields of APPLICATIONS modern professional electronics where reliability and stability is of major concern. The typical applications in the Automotive fields of automotive, telecommunication and medical Telecommunication equipment reflect the outstanding level of proven reliability. Industrial Medical equipment TECHNICAL SPECIFICATIONS DESCRIPTION MMU 0102 MMA 0204 MMB 0207 DIN size 0102 0204 0207 Metric size code RC2211M RC3715M RC6123M Resistance range 0.22 to 2.21 M 0 0.22 to 10 M 0 0.1 to 15 M 0 Resistance tolerance 5 % 2 % 1 % 0.5 % 5 % 1 % 0.5 % 5 % 2 % 1 % 0.5 % 100 ppm/K 50 ppm/K Temperature coefficient 50 ppm/K 25 ppm/K 25 ppm/K (1) Rated dissipation, P 0.3 W 0.4 W 1.0 W 70 Operating voltage, U AC /DC 150 V 200 V 350 V max. RMS (1) Permissible film temperature, 155 C F max. (1) Operating temperature range -55 C to 155 C Permissible voltage against ambient (insulation): 1 min, U 200 V 300 V 500 V ins 9 Failure rate: FIT 0.1 x 10 /h observed Note (1) Please refer to APPLICATION INFORMATION below APPLICATION INFORMATION When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Revision: 06-Apr-18 Document Number: 28713 1 For technical questions, contact: melf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 MMU 0102, MMA 0204, MMB 0207 - Professional www.vishay.com Vishay Beyschlag MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION OPERATION MODE STANDARD POWER MMU 0102 0.2 W 0.3 W Rated dissipation, P MMA 0204 0.25 W 0.4 W 70 MMB 0207 0.4 W 1.0 W Operating temperature range -55 C to 125 C -55 C to 155 C Permissible film temperature, max. 125 C 155 C F MMU 0102 0.22 to 2.21 M 0.22 to 2.21 M MMA 0204 0.22 to 10 M 0.22 to 10 M MMB 0207 0.1 to 15 M 0.1 to 15 M Max. resistance change at P for 70 resistance range, R/R after: 1000 h 0.15 % 0.25 % 8000 h 0.3 % 0.5 % 225 000 h 1.0 % - Note The presented operation modes do not refer to different types of resistors, but actually show examples of different loads, that lead to different film temperatures and different achievable load-life stability (drift) of the resistance value. A suitable low thermal resistance of the circuit board assembly must be safeguarded in order to maintain the film temperature of the resistors within the specified limits. Please consider the application note Thermal Management in Surface-Mounted Resistor Applications (www.vishay.com/doc 28844) for information on the general nature of thermal resistance TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE/SIZE TCR TOLERANCE RESISTANCE E-SERIES 5 % 0.22 to 0.91 E24 2 % 1 to 9.1 50 ppm/K 1 % 10 to 2.21 M E24 E96 MMU 0102 0.5 % 10 to 221 k E24 E192 1 % 10 to 221 k E24 E96 25 ppm/K 0.5 % 10 to 221 k E24 E192 Jumper I = 2 A 10 m 0 - max. 5 % 0.22 to 0.91 E24 (1) 1 % 0.22 to 0.91 50 ppm/K 1 % 1 to 10 M E24 E96 MMA 0204 0.5 % 10 to 2.21 M E24 E192 1 % 10 to 511 k E24 E96 25 ppm/K 0.5 % 10 to 511 k E24 E192 Jumper I = 3 A 10 m 0 - max. 5 % 0.1 to 0.2 100 ppm/K (1) 2 % 0.1 to 0.2 5 % 0.22 to 0.91 E24 2 % 0.22 to 0.91 MMB 0207 50 ppm/K (1) 1 % 0.22 to 0.91 1 % 1 to 15 M E24 E96 25 ppm/K 0.5 % 10 to 1 M E24 E192 Jumper I = 5 A 10 m 0 - max. Note (1) Approval according to EN 140401-803 not available Revision: 06-Apr-18 Document Number: 28713 2 For technical questions, contact: melf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000