NOMCA16032002ATS Vishay

NOMCA www.vishay.com Vishay Dale Thin Film Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor, Precision Automotive, AEC-Q200 Qualified, Networks FEATURES Standard 14 pins and 16 pins counts (0.150 narrow body) JEDEC MS-012 variation AB and AC Rugged molded case construction Excellent long term ratio stability (R 0.015 %) Low TCR tracking 5 ppm/C AEC-Q200 ESD rated 1 kV (< 10 k) The NOMCA series features a standard 14 pin or 16 pin narrow body (0.150 ) small outline SMT package. The AEC-Q200 ESD rated 2 kV (>10 k ) network is constructed with tantalum nitride resistor film on Compliant to RoHS Directive 2011/65/EU high purity alumina substrate for improved ESD and moisture protection. Custom schematics are available Halogen-free according to IEC 61249-2-21 definition consult factory. Note * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL. 0.10 0.05 SCHEMATICS 1403 1603 The 03 circuit provides a choice of 7 or 8 equal value resistors each connected between a common lead (14 or 16). Custom schematics available. STANDARD RESISTANCE OFFERING (Equal Value Resistors) ISOLATED (03) SCHEMATIC 1 k 2 k 5 k 10 k 20 k 50 k Note Consult factory for additional values Revision: 24-Feb-12 Document Number: 60117 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000NOMCA www.vishay.com Vishay Dale Thin Film STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride (Ta2N) - Pin/Lead Number 14, 16 - Resistance Range 1 k to 50 k each resistor - TCR: Absolute 25 ppm/C (standard) - 55 C to + 125 C TCR: Tracking 5 ppm/C (typical) - 55 C to + 125 C Tolerance: Absolute 0.10 % to 1 % + 25 C Tolerance: Ratio 0.05 % to 0.1 % + 25 C Power Rating: Resistor 100 mW ((typical) (03) schematic) Maximum at + 70 C Power Rating: Package 400 mW/500 mW Maximum at + 70 C Stability: Absolute R 0.05 % 1000 h at + 125 C Stability: Ratio R 0.015 % 1000 h at + 125 C Voltage Coefficient < 0.1 ppm/V - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to + 125 C - Storage Temperature Range - 55 C to + 150 C - Noise - 30 dB - Thermal EMF 0.08 V/C - Shelf Life Stability: Absolute R 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R 0.002 % 1 year at + 25 C DIMENSIONS AND IMPRINTING in inches and millimeters 14 16 DIMENSION INCHES MILLIMETERS INCHES MILLIMETERS H 0.235 5.969 0.235 5.969 E 0.154 3.911 0.154 3.910 H E Index Area O 0.340 8.363 0.390 9.906 PIN 1 Locator A 0.063 1.600 0.063 1.600 e 0.050 1.270 0.050 1.270 h x 45 O B 0.015 0.381 0.015 0.381 C A C 0.008 0.203 0.008 0.203 e B L 0.025 0.635 0.025 0.635 L A 1 1 A 0.006 0.152 0.006 0.152 h 0.015 0.381 0.015 0.381 MECHANICAL SPECIFICATIONS Resistive Element Tantalum nitride (Ta2N) Substrate Material Ceramic Body Molded epoxy Terminals Copper alloy Lead (Pb)-free Option 100 % matte tin plate or Ni/Pd/Au solder free option Revision: 24-Feb-12 Document Number: 60117 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000