NTCALUG01A Series www.vishay.com Vishay BCcomponents NTC Thermistors, Standard Lug Sensors FEATURES Easy mounting using ring tongue terminal Rugged construction Available Cable of PTFE insulation according to (1) NEMA HP-3, type E, rated 600 V , cable RMS test voltage 3.4 kV AEC-Q200 qualified (grade 1) UL recognized, file E148885 (UL category XGPU2) click logo to get started DESIGN SUPPORT TOOLS Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Models Design Tools Note Available Available (1) Formerly MIL-W-16878/4, type E SPICE models available: www.vishay.com/doc 29178 NTC curve computation: APPLICATIONS www.vishay.com/thermistors/ntc-curve-list/ Suitable for surface sensing applications, especially when a good electrical insulation and a good thermal contact with QUICK REFERENCE DATA the chassis is required. PARAMETER VALUE UNIT (1) Resistance value at 25 C 4.7K to 100K DESCRIPTION (1) Tolerance on R -value 1 to 5 % 25 A NTC thermistor chip is soldered to AWG 24 stranded (1) B -value 3435 to 4190 K copper leads with PTFE insulation and insulated with epoxy 25/85 coating. The insulated sensor is attached to a tin plated Tolerance on B -value 0.5 to 1.5 % 25/85 copper ring lug. The lead wires are twisted and tinned. Operating temperature range at: C Zero dissipation -40 to +150 PACKAGING (2) Dissipation factor 23 mW/K The thermistors are packed in cardboard boxes the (2) Thermal time constant 7.5 s smallest packaging quantity is 500 units. Min. dielectric withstanding 1500 V AC voltage between terminals and lug MOUNTING Min. insulation resistance between 100 M terminals and lug at 500 V DC By means of M3 (Stud 3, 4) or M3,5 (Stud 5, 6) screw . Climatic category Leads to be soldered or crimped 40 / 150 / 56 (LCT / UCT / days) The device is suitable for screwing e.g. on metal surface Weight 1.5 to 2.3 g The leads are suitable for soldering e.g. on PCB Notes Consult Vishay for other cable length, cable section , (1) Other R -values, B -values, and tolerances are available 25 25/85 screw sizes, insulation, connector crimping, or other upon request features (2) Measured with screw mounted on an aluminum heatsink of 2 100 cm , thickness 1.5 mm, in still air at T = +25 C amb Revision: 30-Jan-2019 Document Number: 29092 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 NTCALUG01A Series www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters T D2 D3 D4 D1 L2 E L1 L3 L L D D D TL ED 1 2 1 2 3 3 4 Refer to the ordering 3.8 1 3.7 +0.2 / -0 7.2 0.2 5.6 +0.3 / -0.2 1.0 15.70 0.3 6.2 0.2 1.12 0.1 table ELECTRICAL DATA AND ORDERING INFORMATION SAP MATERIAL AND ORDERING NUMBER UL R R -TOL. B B -TOL. L 25 25 25/85 25/85 1 DESCRIPTION RECOGNIZED with without ( ) ( %) (K) ( %) (mm) (2) (2) (Y / N) RoHS exemption RoHS exemption NTC Lug01 4.7K 3 % 38.1 4700 3 3984 0.5 3984K PTFE NTCALUG01A472H NTCALUG01A472HA N 3.8 AWG 24 38 mm NTC Lug01 10K 1 % 38.1 10 000 1 3435 1 3435K PTFE NTCALUG01A103FL NTCALUG01A103FLA Y 3.8 AWG 24 38 mm NTC Lug01 10K 1 % 38.1 10 000 1 3984 0.5 3984K PTFE NTCALUG01A103F NTCALUG01A103FA Y 3.8 AWG 24 38 mm NTC Lug01 10K 1 % 80 10 000 1 3984 0.5 3984K PTFE NTCALUG01A103F800 NTCALUG01A103F800A Y 5 AWG 24 80 mm NTC Lug01 10K 1 % 80 10 000 1 3435 1 3435K PTFE NTCALUG01A103F800L NTCALUG01A103F804A Y 5 AWG 24 80 mm NTC Lug01 10K 1 % 160 10 000 1 3984 0.5 3984K PTFE NTCALUG01A103F161 NTCALUG01A103F161A Y +10 / -5 AWG 24 160 mm NTC Lug01 10K 1 % 160 10 000 1 3435 1 3435K PTFE NTCALUG01A103F161L NTCALUG01A103F165A Y +10 / -5 AWG 24 160 mm NTC Lug01 10K 2 % 38.1 10 000 2 3984 0.5 3984K PTFE NTCALUG01A103G NTCALUG01A103GA Y 3.8 AWG 24 38 mm NTC Lug01 10K 3 % 38.1 10 000 3 3984 0.5 3984K PTFE NTCALUG01A103H NTCALUG01A103HA Y 3.8 AWG 24 38 mm NTC Lug01 10K 5 % 38.1 (1) 10 000 5 3984 0.5 3984K PTFE NTCALUG01A103J NTCALUG01A103JA Y 3.8 AWG 24 38 mm NTC Lug01 47K 3 % 38.1 47 000 3 4090 1.5 4090K PTFE NTCALUG01A473H NTCALUG01A473HA N 3.8 AWG 24 38 mm NTC Lug01 100K 1 % 38.1 100 000 1 4190 1.5 4190K PTFE NTCALUG01A104F NTCALUG01A104FA N 3.8 AWG 24 38 mm NTC Lug01 100K 2 % 38.1 100 000 2 4190 1.5 4190K PTFE NTCALUG01A104G NTCALUG01A104GA N 3.8 AWG 24 38 mm Notes (1) NTCALUG01A103J identical to NTCALUGE2C90169 = 2381 645 90169 (2) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound Revision: 30-Jan-2019 Document Number: 29092 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000