NTCALUG01T103G Vishay

333 3 NTCALUG01T www.vishay.com Vishay BCcomponents NTC Thermistors, Standard Lug Sensors, 150 C FEATURES 150 C long term stability (5000 h dry heat) Easy mounting using ring tongue terminal Available Rugged construction Cable with ETFE insulation according to NEMA HP-3, type Z, rated 600 V , cable test RMS voltage 3.4 kV AEC-Q200 qualified (grade 1) cULus recognized, file E148885 (UL category XGPU2/XGPU8) Material categorization: for definitions of compliance LINKS TO ADDITIONAL RESOURCES please see www.vishay.com/doc 99912 APPLICATIONS 3D Models Design Tools Models Related Documents Suitable for surface sensing applications, especially when a good electrical insulation and a good thermal contact with QUICK REFERENCE DATA the chassis is required for: PARAMETER VALUE UNIT (1) Resistance value at 25 C 10K Automotive equipment (1) Tolerance on R -value 1 to 2 % 25 EV and battery management (1) B -value 3435, 3984 K 25/85 Power electronics, heat sink Tolerance on B -value 0.5 to 1 % 25/85 Operating temperature range Consumer appliances -40 to +150 C at zero dissipation Min. dielectric withstanding DESCRIPTION 2700 V AC voltage between terminals and lug A NTC thermistor chip is soldered to AWG 26 Min. insulation resistance between 100 M multi-stranded silver plated copper leads with ETFE terminals and lug at 500 V DC insulation and insulated with epoxy coating. The insulated Weight 2.0 to 3.2 g sensor is attached to a tin plated copper ring lug via a middle Note buffer layer. The lead wires are twisted. (1) Other R -values, B -values, and tolerances are available 25 25/85 upon request PACKAGING AGENCY APPROVALS The thermistors are packed in cardboard boxes the smallest packaging quantity is 200 units. cUL certificate XGPU8.E148885 CAUTIONS AND WARNINGS ON MOUNTING ULus certificate XGPU2.E148885 AND HANDLING Note Agency approval documents, please see: Please read the special instructions: www.vishay.com/ppg 29164&documents see www.vishay.com/doc 29221. By means of M3 (stud 3, 4) or M3,5 (stud 5, 6) screw. DESIGN-IN SUPPORT Leads to be soldered or crimped Other resistance curves and tolerances are available on The device is suitable for screwing e.g. on metal surface request The leads are suitable for soldering e.g. on PCB Consult Vishay for other lead length, other connector crimping, or other features NTCALUG01T www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters T D2 D3 D4 D1 L2 E L1 L3 L L D D D TL ED 1 2 1 2 3 3 4 Refer to the ordering 3.8 1 3.7 +0.2 / -0 7.2 0.2 5.6 +0.3 / -0.2 1.0 15.70 0.3 6.2 0.2 0.93 0.1 table ELECTRICAL DATA AND ORDERING INFORMATION UL SAP MATERIAL AND ORDERING NUMBER R - B - 25 25/85 RECOG. R B L 25 25/85 1 TOL. TOL. DESCRIPTION RoHS-COMPLIANT () (K) (mm) (2) RoHS-COMPLIANT ( %) ( %) (1) WITH EXEMPTION NTC Lug01T 10K 1 % 3984 K 10 000 1 3984 0.5 150 10 NTCALUG01T103F NTCALUG01T103FA 150 C ETFE AWG26 150 mm NTC Lug01T 10K 1 % 3435 K 10 000 1 3435 1.0 150 10 NTCALUG01T103FL NTCALUG01T103FLA 150 C ETFE AWG26 150 mm NTC Lug01T 10K 2 % 3984 K 10 000 2 3984 0.5 40 5 NTCALUG01T103G400 NTCALUG01T103G400A 150 C ETFE AWG26 40 mm NTC Lug01T 10K 2 % 3984 K 10 000 2 3984 0.5 150 10 NTCALUG01T103G NTCALUG01T103GA 150 C ETFE AWG26 150 mm NTC Lug01T 10K 2 % 3984 K 10 000 2 3984 0.5 200 10 NTCALUG01T103G201 NTCALUG01T103G201A 150 C ETFE AWG26 200 mm NTC Lug01T 10K 2 % 3984 K 10 000 2 3984 0.5 500 10 NTCALUG01T103G501 NTCALUG01T103G501A 150 C ETFE AWG26 500 mm Notes Preferred versions for new designs (1) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound. (e2) The end conductor is dipped in tin-silver alloy solder (2) RoHS I, RoHS II, RoHS III, without exemption, and lead (Pb)-free. (e4) The end conductor is multistranded silver plated copper Revision: 01-Mar-2022 Document Number: 29164 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000