NTCALUG02A103F161L Vishay

333 3 NTCALUG02A Series www.vishay.com Vishay BCcomponents NTC Thermistors, Low Thermal Gradient Lug Sensors FEATURES Low thermal gradient due to the use of nickel conductor and low profile closed ring tongue AEC-Q200 qualified (grade 1) Available cULus recognized, file E148885 (UL category XGPU2/XGPU8) Mounting: assembly screw mounting Material categorization: ADDITIONAL RESOURCES for definitions of compliance please see www.vishay.com/doc 99912 3D Models Design Tools Models APPLICATIONS Thermistors used for accurate surface temperature sensing NTC curve computation: and control in: www.vishay.com/thermistors/ntc-curve-list/ Computer equipment Power electronics, heat-sink temperature control QUICK REFERENCE DATA Consumer appliances PARAMETER VALUE UNIT Industrial equipment (1) Resistance value at 25 C 4.7K to 100K Automotive equipment (1) Tolerance on R -value 1 2 3 % 25 (1) DESCRIPTION B value 3435 to 4190 K 25/85 Vishay thermistor chip NTC with epoxy coating and middle Tolerance on B -value 0.5 1.0 1.5 % 25/85 buffer layer mounted in a tin plated copper ring lug with Operating temperature range at -55 to +125 C PEEK insulated leads AWG 30 ( 0.25 mm), zero power mono-stranded silver-plated nickel. Thermal time constant 5s Dissipation factor 10 mW/K MOUNTING (2) Thermal gradient < 0.05 K/K The device is suitable for screwing e.g. on a metal surface Min. dielectric withstanding through means of an M3 or M3.5 screw 1500 V AC voltage between terminals and lug The connections are suitable for soldering on a PCB or for Climatic category connector insertion 55 / 125 / 56 (LCT / UCT / days) The sensor is not suitable for being in permanent contac t Weight 1.0 g with water or liquids Notes Other applicable screw hole sizes are available, for (1) Other R -values, B -values, and tolerances are available 25 25/85 example M4 or American Stud 8 upon request AWG 28 or AWG 26 wires available on request (2) The thermal gradient is the difference per C between the true Consult Vishay for other cable length, cable section , temperature of the surface to be sensed and the temperatur e screw sizes, insulation, connector crimping or other measured by the sensor features ELECTRICAL DATA AND ORDERING INFORMATION SAP MATERIAL AND ORDERING NUMBER R R -TOL. B B -TOL. L UL RECOGNIZED 25 25 25/85 25/85 1 RoHS COMPLIANT ( ) ( %) (K) ( %) (mm) (Y / N) RoHS COMPLIANT (1) WITH EXEMPTION 4700 2 3984 0.5 45 3 N NTCALUG02A472G NTCALUG02A472GA 4700 1 3984 0.5 45 3 N NTCALUG02A472F NTCALUG02A472FA 5000 2 3984 0.5 45 3 Y NTCALUG02A502G NTCALUG02A502GA (2) 10 000 2 3984 0.5 45 3 Y NTCALUG02A103G NTCALUG02A103GA 10 000 1 3984 0.5 45 3 Y NTCALUG02A103F NTCALUG02A103FA 10 000 1 3984 0.5 80 +5 / -3 Y NTCALUG02A103F800 NTCALUG02A103F800A 10 000 1 3984 0.5 160 +5 / -3 Y NTCALUG02A103F161 NTCALUG02A103F161A 10 000 1 3435 1.0 45 3 Y NTCALUG02A103FL NTCALUG02A103FLA 10 000 1 3435 1.0 80 +5 / -3 Y NTCALUG02A103F800L NTCALUG02A103F804A 10 000 1 3435 1.0 160 +5 / -3 Y NTCALUG02A103F161L NTCALUG02A103F165A 100 000 3 4190 1.5 45 3 N NTCALUG02A104H NTCALUG02A104HA Notes (1) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound (2) Is also known under material number NTCALUGE4C90294 Revision: 24-Sep-2019 Document Number: 29094 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D NTCALUG02A Series www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters T D 2 D D 3 4 D 1 L 2 E L L 1 3 L L L D D D D ET 1 2 3 1 2 3 4 Refer to the ordering 6 1 16.8 0.3 3.7 + 0.2 / - 0 8.5 0.2 4.1 + 0.4 / - 0.1 0.56 0.1 4.8 0.2 0.8 table Revision: 24-Sep-2019 Document Number: 29094 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000