NTCALUG02A103F804A Vishay

333 3 NTCALUG02A Series www.vishay.com Vishay BCcomponents NTC Thermistors, Low Thermal Gradient Lug Sensors FEATURES Low thermal gradient due to the use of nicke l conductor and low profile closed ring tongue Available AEC-Q200 qualified (grade 1) cULus recognized, file E148885 (UL category XGPU2/XGPU8) Mounting: assembly screw mounting LINKS TO ADDITIONAL RESOURCES Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 3D Models Design Tools Models Related Documents APPLICATIONS Thermistors used for accurate surface temperature sensing QUICK REFERENCE DATA and control in: PARAMETER VALUE UNIT (1) Computer equipment Resistance value at 25 C 4.7K to 100K (1) Tolerance on R -value 1 2 3 % Power electronics, heat-sink temperature control 25 (1) B value 3435 to 4190 K 25/85 Consumer appliances Tolerance on B -value 0.5 1.0 1.5 % 25/85 Industrial equipment Operating temperature range at -55 to +125 C Automotive equipment zero power Thermal time constant 5s DESCRIPTION Dissipation factor 10 mW/K Vishay thermistor chip NTC with epoxy coating and middle (2) Thermal gradient < 0.05 K/K buffer layer mounted in a tin plated copper ring lug with Min. dielectric withstanding PEEK insulated leads AWG 30 ( 0.25 mm), 1500 V AC voltage between terminals and lug mono-stranded silver-plated nickel. Min. insulation resistance between 100 M terminals and lug at 500 V DC PACKAGING Climatic category 55 / 125 / 56 The thermistors are packed in cardboard boxes the (LCT / UCT / days) smallest packaging quantity is 500 units. Weight 1.0 g Notes CAUTIONS AND WARNINGS ON MOUNTING (1) Other R -values, B -values, and tolerances are available 25 25/85 AND HANDLING upon request (2) The thermal gradient is the difference per C between the true Please read the special instructions: temperature of the surface to be sensed and the temperatur e see www.vishay.com/doc 29221. measured by the sensor The device is suitable for screwing e.g. on a metal surface through means of an M3 or M3.5 screw AGENCY APPROVALS The connections are suitable for soldering on a PCB or for cUL certificate XGPU8.E148885 connector insertion ULus certificate XGPU2.E148885 The sensor is not suitable for being in permanent contac t Note with water or liquids Agency approval documents, please see: www.vishay.com/ppg 29094&documents Other applicable screw hole sizes are available, for example M4 or American Stud 8 DESIGN-IN SUPPORT AWG 28 or AWG 26 wires available on request Other resistance curves and tolerances are available on request Consult Vishay for other lead length, other connector crimping, or other features 3D solid models: www.vishay.com/doc 29145 NTC curve computation: www.vishay.com/thermistors/ntc-rt-calculator/ Revision: 16-Aug-2021 Document Number: 29094 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D NTCALUG02A Series www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters T D 2 D D 3 4 D 1 L 2 E L L 1 3 L L L D D D D ET 1 2 3 1 2 3 4 Refer to the ordering 6 1 16.8 0.3 3.7 + 0.2 / - 0 8.5 0.2 4.1 + 0.4 / - 0.1 0.56 0.1 4.8 0.2 0.8 table ELECTRICAL DATA AND ORDERING INFORMATION SAP MATERIAL AND ORDERING NUMBER UL RECOG. R R -TOL. B B -TOL. L 25 25 25/85 25/85 1 RoHS-COMPLIANT () ( %) (K) ( %) (mm) RoHS-COMPLIANT (1) WITH EXEMPTION NTCALUG02A472GA 4700 2 3984 0.5 45 3 NTCALUG02A472G 4700 1 3984 0.5 45 3 NTCALUG02A472F NTCALUG02A472FA NTCALUG02A502GA 5000 2 3984 0.5 45 3 NTCALUG02A502G (2) 10 000 2 3984 0.5 45 3 NTCALUG02A103G NTCALUG02A103GA NTCALUG02A103FA 10 000 1 3984 0.5 45 3 NTCALUG02A103F 10 000 1 3984 0.5 80 +5 / -3 NTCALUG02A103F800 NTCALUG02A103F800A NTCALUG02A103F161A 10 000 1 3984 0.5 160 +5 / -3 NTCALUG02A103F161 10 000 1 3435 1.0 45 3 NTCALUG02A103FL NTCALUG02A103FLA NTCALUG02A103F804A 10 000 1 3435 1.0 80 +5 / -3 NTCALUG02A103F800L 10 000 1 3435 1.0 160 +5 / -3 NTCALUG02A103F161L NTCALUG02A103F165A NTCALUG02A104HA 100 000 3 4190 1.5 45 3 NTCALUG02A104H Notes Preferred versions for new designs (1) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound (2) Is also known under material number NTCALUGE4C90294 Revision: 16-Aug-2021 Document Number: 29094 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000