NTCLE213E3103GHB0 Vishay

333 3 NTCLE213E3 www.vishay.com Vishay BCcomponents NTC Thermistor, Epoxy Coated Mini Sensor FEATURES Advanced NTC technology Temperature range from -55 C to +150 C Highly resistant to thermal shocks Small body diameter of max. 2.5 mm AEC-Q200 qualified Fast response time High sensitivity Delivery in bulk or in tape with extra long leads (for automatic mounting) Mounting: radial Material categorization: for definitions of compliance LINKS TO ADDITIONAL RESOURCES please see www.vishay.com/doc 99912 APPLICATIONS 3D Models Design Tools Models Related Temperature sensing, control and compensation. Documents E.g. inlet air temperature sensing thermistors or ECT i n automotive applications, sensor elements in industrial and commercial applications, heating systems and industrial QUICK REFERENCE DATA systems. PARAMETER VALUE UNIT Resistance value at 25 C 2.1K to 100K DESCRIPTION Tolerance on R -value 1 to 5 % 25 These negative temperature coefficient thermistors consist of a mini-chip soldered between two tin plated 0.4 mm B -value 3511 to 4190 K 25/85 nickel leads, coated with ocher colored epoxy lacquer an d Tolerance on B -value 0.5 to 1.5 % 25/85 coded with a color dot. Operating temperature range -55 to +150 C MOUNTING Response time (63.2 %) 25 C to 85 C 5s stirred air (for info) Important mounting and handling instructions: see www.vishay.com/doc 29222 Dissipation factor in still air (for info) 1.8 mW The thermistors are suitable for all standard assembly Maximum power dissipation at 55 C 100 mW processes like crimping, soldering, welding, and potting into Min. dielectric withstanding voltage 500 V epoxy or silicon resins. The parameters and materials of the AC between terminals and coated body assembly process should be chosen in accordance with the Insulation resistance at 100 V > 10M DC lead-wire and coated body and validated in the application. Weight 100 mg The mounting process should be in compliance with the following guidelines and recommendations: Peeling forces on the leads should be reduced to a minimum and should never exceed 3 N. A strain relief tool should be used if needed Avoid large temperature gradients between the welding region and the sensor PACKAGING Bulk components are delivered in boxes of 500 components Taped components are delivered on a reel of 1500 components (according to IEC 60286-2 but with extra long leads: H0 = 32 mm) ELECTRICAL DATA AND ORDERING INFORMATION R R -TOL. B B -TOL. COLOR DOT SAP MATERIAL AND 25 25 25/85 25/85 (1) () ( %) (K) ( %) (see next page) ORDERING NUMBER 2100 1, 2, 3, 5 3511 1 Orange NTCLE213E3212xMyy 10 000 1, 2, 3, 5 3435 1 Red NTCLE213E3103xLyy 10 000 1, 2, 3, 5 3984 0.5 Blue NTCLE213E3103xHyy 12 000 1, 2, 3, 5 3740 1 Black NTCLE213E3123xMyy 30 000 1, 2, 3, 5 3935 0.75 Green NTCLE213E3303xHyy 100 000 1, 2, 3, 5 4190 1.5 Brown NTCLE213E3104xXyy Note (1) Replace the x-digit by J for R -tolerance of 5 %, H for 3 %, G for 2 %, and F for 1 %. 25 Replace the y-digits by B0 for bulk delivery and by T1 for tape and reel delivery Revision: 16-Oct-2020 Document Number: 29154 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD DNTCLE213E3 www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters D T B Color dot H 1 H 2 F L F 1 d PARAMETER VALUE B max. 2.5 T max. 2.5 F 1.1 F1 2.54 D max. (mounting diameter) 2.5 d 0.4 10 % H1 max. 5.5 H2 max. 10 L 41 1 Note Non-dimensioned details do not affect the performance of the thermistors Revision: 16-Oct-2020 Document Number: 29154 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000