NTCLE317E4103SBA www.vishay.com Vishay BCcomponents NTC Thermistors, Long Insulated Leads 150 C With Very Low Thermal Gradient FEATURES Long and flexible leads for special mounting or assembly requirements Best accuracy of 0.5 C between 25 C an d 85 C and 1.0 C between -55 C and 150 C Electrical features of accuracy line sensors Mounting: radial insulated leads, low heat-conducting FeNi wires LINKS TO ADDITIONAL RESOURCES AEC-Q200 qualified Fast response time of 0.3 s with small 1.6 mm head Design Tools Related Material categorization: for definitions of compliance Documents please see www.vishay.com/doc 99912 QUICK REFERENCE DATA APPLICATIONS PARAMETER VALUE UNIT Temperature measurement, sensing and control in Resistance value at 25 C 10K automotive and industrial applications as e.g. battery cells Tolerance on R -value 2.19 % 25 and packs. Temperature accuracy between 25 C and 85 C 0.5 C DESCRIPTION -55 C and 150 C 1.0 B -value 3984 K These negative temperature coefficient thermistors consist 25/85 Tolerance on B -value 0.5 % of a mini-chip soldered between two AWG 32 PEEK 25/85 Operating temperature range at insulated silver plated nickel / iron leads and coated wit h -55 to +150 C zero dissipation ocher colored epoxy lacquer. High adhesive strength Resistance value at 85 C 1066.1 between PEEK wire and encapsulating lacquer. Maximum power dissipation at 55 C 50 mW Min. dielectric withstanding voltage PACKAGING 100 V (RMS) between leads and coating The thermistors are packed in cardboard boxes the Dissipation factor in still air smallest packing quantity is 1000 units. 0.8 mW/K (for information only) Response time (in oil) 0.3 s MARKING Weight 0.05 g The component is not marked. DESIGN-IN SUPPORT MOUNTING Not intended for fluid immersed applications or continuous Important mounting and handling instructions: see contact with water or conducting liquids. Can be potted in www.vishay.com/doc 29222 suitable resins. For complete curve computation, please By soldering or crimping the wire end in any position. The visit: www.vishay.com/thermistors/ntc-curve-list/. Consul t body can be inserted in a tube, free in air, tape attached or Vishay for specific applications, mounting, alternative RT glued. curves, or wire length. DIMENSIONS in millimeters B d d 2 1 T L 2 L 1 L TB L L L d d 1 2 2 MAX. 1 1.6 max. 1.6 max. 75 3 6 1 5 2 0.4 0.2 0.02 ELECTRICAL DATA AND ORDERING INFORMATION R T-TOL. B B -TOL. SAP MATERIAL AND ORDERING NUMBER 25 25/85 25/85 ( ) ( C) (K) ( %) RoHS COMPLIANT 10 000 0.5 3984 0.5 NTCLE317E4103SBA Revision: 04-Nov-2020 Document Number: 29216 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and al l liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 Document Number: 91000 1