333 3 NTCLP100 www.vishay.com Vishay BCcomponents NTC Thermistors, Pipe PVC Long Leads Sensors FEATURES Accurate over wide temperature range High stability Available Excellent price/performance ratio High adhesive strength between PVC wire and the encapsulating lacquer Material categorization: for definitions of compliance please se e www.vishay.com/doc 99912 LINKS TO ADDITIONAL RESOURCES APPLICATIONS Temperature measurement, sensing and control in remote locations and for various environmental conditions. 3D Models Design Tools Related Documents DESCRIPTION QUICK REFERENCE DATA These sensors exist of a small NTC chip reflow soldered PARAMETER VALUE UNIT between two AWG 24 UL-2468 style wires. They are lacquered and insulated potted into a brass pipe. Resistance value at 25 C (R ) 2.2K to 100K 25 (1) Tolerance on R -value 3 % 25 MARKING B -value 3977 to 4190 K 25/85 UL mark on wire, no mark on body. Tolerance on B -value 0.75 to 1.5 % 25/85 Operating temperature range -40 to +85 C PACKAGING at zero dissipation The thermistors are packed in cardboard boxes each box Maximum power dissipation 250 mW at 55 C containing 500 pieces. Min. dielectric withstanding DESIGN-IN SUPPORT voltage between terminals 1500 V AC and sensor body Other wire length and wire type (UL-2651 style PVC 105 C), Dissipation factor 6.0 mW/K other wire gauges are available on request. The products (2) Response time 10 s can be provided with a connector on request. Weight 6g For complete curve computation, please visit: www.vishay.com/thermistors/ntc-curve-list/ Notes (1) Tighter tolerances on R are available upon request 25 (2) MOUNTING Response time in silicone oil MS 200/50. This is the time needed for the sensor to reach 63.2 % of the total temperature By soldering or clamping the wire ends, in any position. difference when subjected to a temperature change from 25 C Body can be inserted or taped attached. Not intended fo r in air to 85 C in oil fluid immersed applications. ELECTRICAL DATA AND ORDERING INFORMATION SAP MATERIAL AND ORDERING NUMBER R R -TOL. B B -TOL. 25 25 25/85 25/85 RoHS COMPLIANT () ( %) (K) ( %) RoHS COMPLIANT (1) WITH EXEMPTION 2200 3 3977 0.75 NTCLP100E3222H NTCLP100E3222HA 4700 3 3977 0.75 NTCLP100E3472H NTCLP100E3472HA 5000 3 3977 0.75 NTCLP100E3502H NTCLP100E3502HA 10 000 3 3977 0.75 NTCLP100E3103H NTCLP100E3103HA 47 000 3 4090 1.5 NTCLP100E3473H NTCLP100E3473HA 100 000 3 4190 1.5 NTCLP100E3104H NTCLP100E3104HA Notes Preferred versions for new designs (1) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound Revision: 06-Oct-2020 Document Number: 29060 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D NTCLP100 www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters Brass-pipe type NTCLP100E.... 6 0.1 5 2 25 0.5 L L = 400 mm + 15 / - 0 Other wire lengths or connector attached available on request. DERATING Power derating curve. P (%) 100 0 - 40 055 85 125 T (C) amb Note Zero power is considered as measuring power max. 1 % of max. power Revision: 06-Oct-2020 Document Number: 29060 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000