NTCS0603E3502FLT Vishay

333 3 NTCS0603E3.....T www.vishay.com Vishay BCcomponents SMD 0603, Glass Protected NTC Thermistors FEATURES TCR ranging from -7 %/K at -40 C to -2 %/K at 150 C Tolerance on R down to 1 %, and on B 25 25/85 down to 1 % Suitable for wave or reflow soldering NiSn terminations Fully glass coated and protected cULus recognized, file E148885 (UL category XGPU2 / XGPU8) AEC-Q200 qualified LINKS TO ADDITIONAL RESOURCES Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 3D Models Design Tools APPLICATIONS Temperature sensing, protection and compensation in automotive, industrial, telecom and consume r QUICK REFERENCE DATA applications. Examples are: PARAMETER VALUE UNIT - Battery chargers Resistance value at 25 C 1K to 100K -Power supplies Tolerance on R -value 1 2 3 5 % 25 - Office equipment B -value 3170 to 4100 K 25/85 - LCD compensation Tolerance on B -value 1 % - In-car entertainment 25/85 Maximum dissipation at 25 C 125 mW DESCRIPTION Thermal time constant 8s Size 0603 (M1608) glass protected SMD chip thermistor Dissipation factor D 3.0 mW/K with negative temperature coefficient (TCR) and matte Operating temperature range -40 to +150 C tin (Sn) plated terminations. The device has no marking. at zero power Weight 0.006 g CAUTIONS AND WARNINGS ON MOUNTING AND HANDLING DESIGN-IN SUPPORT Please read the special instructions: For complete curve computation, please visit: see www.vishay.com/doc 29224. www.vishay.com/thermistors/ntc-rt-calculator/ PACKAGING AGENCY APPROVALS Available in 8 mm punched paper tape on reel package of Agency approval documents, please see: 4000 units. www.vishay.com/ppg 29056&documents ELECTRICAL DATA AND ORDERING INFORMATION UL RECOG. R R -TOL. B B -TOL. 25 25 25/85 25/85 (1) SAP MATERIAL AND ORDERING NUMBER () ( %) (K) ( %) 1000 3, 5 3170 1 NTCS0603E3102*LT 1500 3, 5 3280 1 NTCS0603E3152*LT 2000 1, 2, 3, 5 3420 1 NTCS0603E3202*LT 2200 1, 2, 3, 5 3520 1 NTCS0603E3222*MT 2700 1, 2, 3, 5 3600 1 NTCS0603E3272*MT 4700 1, 2, 3, 5 3830 1 NTCS0603E3472*HT 5000 1, 2, 3, 5 3480 1 NTCS0603E3502*LT 10 000 1, 2, 3, 5 3435 1 NTCS0603E3103*LT 10 000 1, 2, 3, 5 3610 1 NTCS0603E3103*MT 10 000 1, 2, 3, 5 3960 1 NTCS0603E3103*HT 15 000 1, 2, 3, 5 3600 1 NTCS0603E3153*MT 22 000 1, 2, 3, 5 3730 1 NTCS0603E3223*MT 33 000 1, 2, 3, 5 3860 1 NTCS0603E3333*HT 47 000 1, 2, 3, 5 3960 1 NTCS0603E3473*HT 68 000 1, 2, 3, 5 3985 1 NTCS0603E3683*HT 100 000 1, 2, 3, 5 4100 1 NTCS0603E3104*XT Note (1) Replace * in SAP material number by J for 5 %, H for 3 %, G for 2 %, F for 1 % tolerance on R 25 Revision: 21-Sep-2021 Document Number: 29056 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D NTCS0603E3.....T www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters L AND L L 2 3 4 L WT 1 MIN. MIN. 1.6 0.15 0.8 0.15 0.8 0.15 0.2 0.4 T W L L L 2 4 3 L 1 SOLDERING CONDITIONS Soldering, handling, and mounting conditions are detailed in the instructions document: see www.vishay.com/doc 29224. Typical examples of a soldering processes that will provide reliable joints without damage, are shown below. Lead (Pb)-free Reflow Soldering Profile Reflow Soldering 10 s 40 s max. 300 300 260 C 260 C 250 245 C 250 245 C 235 C 215 C 200 10 s 200 170 C 20 s min. 180 C 150 150 130 C 60 s 120 C 40 s 6 K/s 100 100 max. 2 K/s 2 K/s 50 max. limit 50 normal 0 0 0 50 100 150 200 250 250 0 50 100 150 200 300 350 Time (s) Time (s) Recommended solder land pattern dimensions (mm) 0.8 1.0 2.4 PACKAGING TAPE SPECIFICATIONS All tape specifications are in accordance with IEC 60286-3. Basic dimensions are given below. Carrier tape material is paper. PAPER TAPE T DIMENSIONS OF PAPER TAPE in millimeters P 0 PARAMETER DIMENSION D P 0 2 (1) A 1.15 0.1 0 (1) 1.9 0.1 B 0 E 1 W 8.0 0.2 1.75 0.1 E 1 F F 3.5 0.05 W 1.55 0.05 D 0 B 0 (2) P 4.0 0.1 0 4.0 0.1 P 1 P 2.0 0.05 2 A 0 T tape thickness max. 1.1 T P JWB288 1 1 T cover tape thickness max. 0.1 1 Notes (1) Measured 0.3 mm above base pocket (2) P pitch cumulative error over any 10 pitches 0.2 mm 0 Revision: 21-Sep-2021 Document Number: 29056 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Temperature (C) Temperature (C)