OLED-016N002H-WPP5N00000 www.vishay.com Vishay 16 x 2 Character OLED FEATURES Type: character Display format: 16 x 2 characters Built-in controller: OLED-0010 Duty cycle: 1/16 +5 V power supply Interface: 6800 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS ITEM STANDARD VALUE UNIT STANDARD VALUE ITEM SYMBOL UNIT Module dimension 122.0 x 44.0 x 10.0 (max.) MIN. MAX. Viewing area 98.0 x 21.0 Supply voltage V to V -0.3 5.3 V DD SS for logic Active area 91.14 x 18.98 Operating T -40 +80 Dot size 0.90 x 1.06 OP temperature mm C Dot pitch 0.96 x 1.12 Storage T -40 +80 STG temperature Mounting hole 115.0 x 37.0 Character size 4.74 x 8.9 Character pitch 5.76 x 10.08 ELECTRICAL CHARACTERISTICS STANDARD VALUE ITEM SYMBOL CONDITION UNIT MIN. TYP. MAX. Supply voltage for logic V to V - 4.8 5.0 5.3 DD SS Input high voltage V - 0.8 V -V IH DD DD Input low voltage V - GND - 0.2 V V IL DD Output high voltage V I = -0.5 mA 0.8 V -V OH OH DD DD Output low voltage V I = 0.5 mA GND - 0.2 V OL OL DD 50 % check board operating current I V = 5 V 525862 mA DD DD CIE (white) (CIE 1931) 0.26 0.28 0.30 x CIE (white) (CIE 1931) 0.30 0.32 0.34 y Note When you use 5 V for V , please do not use 3 V or 3.3 V for logic I/O, this will cause module does not work. DD OPTIONS EMITTING COLOR MOQ YELLOW GREEN RED BLUE WHITE YELLOW GREEN RED BLUE WHITE ---- Yes --- - Yes Revision: 18-Aug-16 Document Number: 37792 1 For technical questions, contact: displays vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 OLED-016N002H-WPP5N00000 www.vishay.com Vishay INTERFACE PIN FUNCTION PIN NO. SYMBOL FUNCTION 1V Ground (0 V) SS 2V Supply voltage for logic (5.0 V) DD 3 NC No connection 4 RS H / L, H: data L: instruction code 5 R / W H / L, H: read (module MPU) L: write (MPU module) 6E H, H L, chip enable signal 7 DB0 H / L, data bit 0 8 DB1 H / L, data bit 1 9 DB2 H / L, data bit 2 10 DB3 H / L, data bit 3 11 DB4 H / L, data bit 4 12 DB5 H / L, data bit 5 13 DB6 H / L, data bit 6 14 DB7 H / L, data bit 7 15 NC No connection 16 NC No connection DIMENSIONS in millimeters 122.0 0.5 3.5 115.0 8.20 105.60 10.0 max. 12.00 98.0 (VA) 4.7 14.95 91.14 (AA) 3.30 14 115 16 2.0 16 x 1.0 PTH 4 x 3.5 PTH 1.60 4 x 6.5 PAD 10.98 P2.54 x 15 = 38.10 5.76 4.74 0.96 0.90 DOT SIZES The non-specified tolerance of dimen sion is 0.3 mm. SCALE 3/1 Revision: 18-Aug-16 Document Number: 37792 2 For technical questions, contact: displays vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 44.0 0.5 31.58 4.21 21.0 (VA) 9.50 18.98 (AA) 10.51 2.50 10.08 8.90 1.12 1.06 37.0 3.5