OLED-100H016H-GPP5N00000 www.vishay.com Vishay 100 x 16 Graphic OLED FEATURES Type: graphic Display format: 100 x 16 dots Built-in controller: OLED-0010 Duty cycle: 1/16 +5 V power supply Interface: 6800 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS ITEM STANDARD VALUE UNIT STANDARD VALUE ITEM SYMBOL UNIT Module dimension 180.0 x 40.0 x 9.3 (max.) MIN. MAX. Viewing area 149.0 x 23.0 Supply voltage V to V -0.3 5.3 V DD SS for logic Active area 121.9 x 19.42 mm Operating T -40 +80 Dot size 1.12 x 1.12 OP temperature C Dot pitch 1.22 x 1.22 Storage T -40 +80 STG temperature Mounting hole 172.0 x 32.0 ELECTRICAL CHARACTERISTICS STANDARD VALUE ITEM SYMBOL CONDITION UNIT MIN. TYP. MAX. Supply voltage for logic V to V - 4.8 5.0 5.3 DD SS Input high voltage V - 0.8 V -V IH DD DD Input low voltage V - GND - 0.2 V V IL DD Output high voltage V I = -0.5 mA 0.8 V -V OH OH DD DD Output low voltage V I = 0.5 mA GND - 0.2 V OL OL DD 50 % check board operating current I V = 5 V 606576 mA DD DD Note When you use 5 V for V , please do not use 3 V or 3.3 V for logic I/O, this will cause module does not work. DD OPTIONS EMITTING COLOR YELLOW GREEN RED BLUE WHITE - Yes --- Revision: 13-Dec-16 Document Number: 37877 1 For technical questions, contact: displays vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 OLED-100H016H-GPP5N00000 www.vishay.com Vishay INTERFACE PIN FUNCTION PIN NO. SYMBOL FUNCTION 1V Ground (0 V) SS 2V Supply voltage for logic (5.0 V) DD 3 NC No connection 4 RS H / L, H: data L: instruction code 5 R / W H / L, H: read (module MPU) L: write (MPU module) 6E H, H L, chip enable signal 7 DB0 H / L, data bit 0 8 DB1 H / L, data bit 1 9 DB2 H / L, data bit 2 10 DB3 H / L, data bit 3 11 DB4 H / L, data bit 4 12 DB5 H / L, data bit 5 13 DB6 H / L, data bit 6 14 DB7 H / L, data bit 7 15 NC No connection 16 NC No connection DIMENSIONS in millimeters 180.00 0.5 10.30 161.40 149.00 (VA) 16.50 121.90 (AA) 30.05 9.3 4.7 16 15 100*16 DOTS 21 4 x 3.5 PTH 0.7 1.6 4 x 6.5 PAD 91.0 4.0 172.0 2.54 1.22 4.0 1.12 The non-specified tolerance of dimen sion is 0.3 mm. 16 x 1.0 PTH 16 x 1.8 PAD PIN DETAIL DOT SIZE Revision: 13-Dec-16 Document Number: 37877 2 For technical questions, contact: displays vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 40.00 0.5 33.60 3.20 23.00 (VA) (P2.54 x 8) 8.50 17.78 9.84 19.42 (AA) 9.68 1.22 1.12 1.85 32.0 4.0