OCT06030W1006JP500 Vishay

OCT 0603, OCU 0805 Vishay Beyschlag High Ohmic Flat Chip Resistors FEATURES Unique very high ohmic chip resistor product Standard TCR: 100 ppm/K Excellent overall stability Low voltage coefficient: 0.05 %/V Wide high ohmic range: > 10 M to 130 M Lead (Pb)-free solder contacts Compliant to RoHS directive 2002/95/EC APPLICATIONS Any kind of battery driven electronics Low consumption CMOS circuitry OCT 0603 and OCU 0805 high ohmic flat chip resistors are Small signal measurement best suited where high resistance, high stability and high reliability are required. Typical applications include any kind METRIC SIZE of battery driven electronics, particularly low consumption INCH: 0603 0805 CMOS circuitry. METRIC: RR 1608M RR 2012M TECHNICAL SPECIFICATIONS DESCRIPTION OCT 0603 OCU 0805 Metric size RR 1608M RR 2012M Resistance range 11 M to 130 M 11 M to 130 M Resistance tolerance 5 % Temperature coefficient 250 ppm/K 100 ppm/K Operation mode Standard Power Standard Power Climatic category (LCT/UCT/days) 55/125/56 55/155/56 55/125/56 55/155/56 (1) Rated dissipation, P Limited by U 70 max. Operating voltage, U AC/DC 75 V 150 V 150 V 200 V max. Film temperature 125 C 155 C 125 C 155 C Max. resistance change at P 70 for resistance range, 11 M to 47 M 11 M to 47 M R/R max., after: 1000 h 1 % 2 % 1 % 2 % 8000 h 2 % 4 % 2 % 4 % Specified lifetime 8000 h Insulation voltage: 1 min U ins 100 V 200 V Continuous 75 V 75 V -9 Failure rate: FIT 0.1 x 10 /h observed Note (1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. www.vishay.com For technical questions, contact: thinfilmchip vishay.com Document Number: 28709 163 Revision: 23-Nov-09OCT 0603, OCU 0805 High Ohmic Flat Chip Resistors Vishay Beyschlag (1) PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: OCT06030B5106JP500 O C T 06 030 B 5 1 06 J P 5 00 (2) MODEL/SIZE SPECIAL CHARACTER TCR VALUE TOLERANCE PACKAGING SPECIAL OCT0603 0 = Neutral B = 100 ppm/K 3 digit value J = 5 % P5 Up to 2 digits OCU0805 W = 250 ppm/K 1 digit multiplier PW 00 = Standard MULTIPLIER 5 5 = *10 6 6 = *10 PRODUCT DESCRIPTION: OCT 0603 -100 5% P5 51M OCT 0603 -100 5 % P5 51M (2) MODEL SIZE TCR TOLERANCE PACKAGING RESISTANCE VALUE OCT 0603 100 ppm/K 5 % P5 47M = 47 M PW OCU 0805 250 ppm/K 220M = 220 M Notes (1) Products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER (2) Please refer to table PACKAGING, below TEMPERATURE COEFFICIENT AND RESISTANCE RANGE (3) DESCRIPTION RESISTANCE VALUE TCR TOLERANCE OCT 0603 OCU 0805 250 ppm/K 5 % 51 M to 130 M 51 M to 130 M 100 ppm/K 5 % 11 M to 47 M 11 M to 47 M Note (3) Resistance values to be selected from E24 series PACKAGING REEL MODEL PIECES/ CODE PAPER TAPE ON REEL 5000 P5 OCT 0603 20 000 PW 5000 P5 OCU 0805 20 000 PW Document Number: 28709 For technical questions, contact: thinfilmchip vishay.com www.vishay.com Revision: 23-Nov-09 164