P www.vishay.com Vishay Sfernice High Precision Wraparound - Wide Ohmic Value Range Thin Film Chip Resistors FEATURES Load life stability at 70 C for 2000 h: 0.1 % under Pn/0.05 % under Pd Low temperature coefficient down to 5 ppm/C (- 55 C + 155 C) Very low noise < - 35 dB and voltage coefficient < 0.01 ppm/V Wide resistance range: 10 to 76 M depending on size Tolerances to 0.01 % In lot tracking 5 ppm/C Termination: Thin film technology Short circuits (jumpers) r < 50 mR, I < 2 A, see PZR For low noise and precision applications, superior stability, datasheet (www.vishay.com/doc 53053) Withstand moisture resistance test of AEC-Q200 low temperature coefficient of resistance, and low voltage Material categorization: For definitions of compliance coefficient, Vishay Sfernices proven precision thin film please see www.vishay.com/doc 99912 wraparound resistors exceed requirements of Note * Lead (Pb)-containing terminations are not RoHS-compliant. MIL-PRF-55342G characteristics Y 10 ppm/C (- 55 C Exemptions may apply. + 155 C) down to 5 ppm/C (- 55 C + 155 C). STANDARD ELECTRICAL SPECIFICATIONS RATED RATED LIMITING RESISTANCE TEMPERATURE POWER POWER ELEMENT TOLERANCE (2) MODEL SIZE RANGE COEFFICIENT W W VOLTAGE % () ppm/C (1) (1) Pn Pd V P0302 0302 10 to 750K 0.040 0.030 25 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 P0402 0402 10 to 1.5M 0.063 0.040 50 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 P0505 0505 10 to 4M 0.125 0.050 50 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 P0603 0603 10 to 3.2M 0.125 0.100 75 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 (3) P0805 0805 10 to 10M 0.200 0.125 150 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 P1005 1005 10 to 8.1M 0.250 0.125 75 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 P1206 1206 10 to 35M 0.330 0.250 200 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 P1505 1505 10 to 15M 0.350 0.175 75 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 P2010 2010 10 to 76M 1 0.500 300 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 Notes Case size 2512 under development. Please consult Vishay Sfernice. (1) Pn = Nominal power - Pd = Derated power intended to improve stability. (2) For ohmic range versus tolerance and TCR see detailed table on next page. (3) Model P0805 being same size than case 0705 with same performances, only codification of P0805 remains. CLIMATIC SPECIFICATIONS MECHANICAL SPECIFICATIONS Operating temperature Substrate Alumina - 55 C + 155 C range Technology Thin film Note Nickel chromium with mineral Film For temperature up to 230 C, see PHT datasheet passivation or CrSi (www.vishay.com/doc 53050) Protection Silicone B type: SnPb over nickel barrier for solder reflow Terminations N type: SnAg over nickel barrier G type: gold over nickel barrierfor other applications Revision: 02-Mar-12 Document Number: 53017 1 For technical questions, contact: sfer vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 P www.vishay.com Vishay Sfernice DIMENSIONS in millimeters (inches) A D D B C E E AB MAX. TOL. MAX. TOL. D/E + 0.152 (+ 0.006) + 0.127 (+ 0.005) CASE SIZE C MIN. TOL. MIN. TOL. - 0.152 (- 0.006) - 0.127 (- 0.005) NOMINAL NOMINAL NOMINAL TOLERANCE 0302 0.75 (0.029) 0.60 (0.024) 0.15 (0.006) 0.08 (0.003) 0402 1.00 (0.039) 0.60 (0.024) 0.25 (0.010) 0.1 (0.004) 0505 1.27 (0.005) 1.27 (0.050) 0603 1.52 (0.060) 0.85 (0.033) 0.38 (0.015) 0.5 (0.02) 0805 1.91 (0.075) 1.27 (0.050) 0.127 (0.005) 1005 2.54 (0.100) 1.27 (0.050) 0.13 (0.005) 1206 3.06 (0.120) 1.60 (0.063) 0.40 (0.016) 1505 3.81 (0.150) 1.32 (0.052) 0.48 (0.019) 2010 5.08 (0.200) 2.54 (0.100) Notes Case size 2512 under development. Please consult Vishay Sfernice. Case 0805 being same than case 0705, only codification of 0805 remains. SUGGESTED LAND PATTERN (to IPC-7351A) G min. X max. Z max. DIMENSIONS (in millimeter) CHIP SIZE Z G X max. min. max. 0302 1.30 0.14 0.73 0402 1.55 0.15 0.73 0505 1.82 0.10 1.40 0603 2.37 0.35 0.98 0805 2.76 0.74 1.40 1005 3.39 1.37 1.40 1206 3.91 1.85 1.73 1505 4.66 2.44 1.45 2010 5.93 3.71 2.67 Note Case size 2512 under development. Please consult Vishay Sfernice. Revision: 02-Mar-12 Document Number: 53017 2 For technical questions, contact: sfer vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000
