P16NM222MAB15 Vishay

333 3 P16, PA16 www.vishay.com Vishay Sfernice Knob Potentiometer FEATURES Test according to CECC 41000 or IEC 60393-1 P16 - version for professional and industrial applications (cermet) 1 W at 40 C PA16 - version for professional audio applications (conductive plastic) 0.5 W at 40 C LINKS TO ADDITIONAL RESOURCES Compact (integrated) High dielectric strength: 2500 V RMS 3D Models Fully sealed and panel sealed The P16 is a revolutionary concept in panel mounted Metallic or plastic knob options potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the Custom knob on request mounting hardware and terminals are situated on the back Material categorization: for definitions of compliance side of the panel reducing to a minimum the required please see www.vishay.com/doc 99912 clearance. QUICK REFERENCE DATA Multiple module No Switch module n/a Detent module n/a Special electrical laws A: linear, L: logarithmic, F: reverse logarithmic Sealing level IP 67 Lifespan 50K cycles DIMENSIONS in millimeters ( 0.5 mm) P16NP P16NM Panel Cutout Thickness nut 2 mm Thickness nut 2 mm washer 1.5 mm washer 1.5 mm Panel sealing ring Panel sealing ring 10.2 12 wrench 9.6 12 wrench 9.4 8.8 Thread M10 x 0.75 Thread M10 x 0.75 + 0.1 8.1 + 0 7.2 7.2 13.5 1 13.5 1 15.5 1 15.5 1 b Reference mark 1.8 + 0.1 3 terminals 10 + 0 0.3 Panel thickness max.: 3 mm 30 c a 16 8 Revision: 01-Apr-2021 Document Number: 51036 1 For technical questions, contact: sferpottrimmers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD DNP NM NM NP NM NP P16, PA16 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS P16 PA16 Resistive element Cermet Conductive plastic Electrical travel 270 10 270 10 1.25 P16 LIN. TAPER A 1.00 0.75 P16 LOG. TAPER L & F Power rating chart 0.50 & PA16 LIN. TAPER 0.25 PA16 LOG. TAPER 0 0 20 40 60 80 100 120 140 AMBIENT TEMPERATURE IN C a c (1) (3) Circuit diagram b cw (2) 100 80 F 60 A L Taper 40 20 0 0120 40 60 8000 % CLOCKWISE SHAFT ROTATION linear taper 22 to 10 M 1 k to 1 M Resistance range logarithmic taper 100 to 2.2 M 470 to 500 k Standard series E3 1 - 2.2 - 4.7 and on request 1 - 2 - 5 1 - 2.2 - 4.7 standard 20 % 20 % Tolerance on request 10 % 10 % (1 k to 100 k) linear 1 W at +40 C 0.5 W at +40 C Power rating logarithmic 0.5 W at +40 C 0.25 W at +40 C Temperature coefficient (typical) 150 ppm/C 500 ppm/C Dielectric strength (RMS) 2500 V 2500 V Limiting element voltage (linear law) 350 V 350 V Contact resistance variation 3 % Rn or 3 2 % Rn or 3 End resistance (typical) 1 1 6 6 Insulation resistance (500 V)10 M 10 M DC Revision: 01-Apr-2021 Document Number: 51036 2 For technical questions, contact: sferpottrimmers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RATED POWER IN W % TOTAL RESISTANCE