P2SMA130A thru P2SMA220A www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB Transient Voltage Suppressors FEATURES Low profile package Ideal for automated placement Glass passivated chip junction Available in uni-directional 200 W peak pulse power capability with a 10/1000 s waveform Excellent clamping capability Very fast response time SMA (DO-214AC) Low incremental surge resistance Meets MSL level 1, per J-STD-020, LF maximum peak of PRIMARY CHARACTERISTICS 260 C V 130 V to 220 V BR Material categorization: for definitions of compliance P 200 W PPM please see www.vishay.com/doc 99912 P 0.5 W D V 111 V to 185 V MECHANICAL DATA WM Case: SMA (DO-214AC) T max. 150 C J Molding compound meets UL 94 V-0 flammability rating Polarity Uni-directional Base P/N-M3 - halogen-free, RoHS-compliant, and Package SMA (DO-214AC) commercial grade Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 TYPICAL APPLICATIONS M3 suffix meets JESD 201 class 2 whisker test Use in sensitive electronics protection against voltage Polarity: color band denotes the cathode end transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1)(2) Peak pulse power dissipation with a 10/1000 s waveform (fig. 1) P 200 W PPM (1) Peak pulse current with a 10/1000 s waveform (fig. 3) I See next table A PPM Power dissipation at T = 25 C (fig. 6) P 0.5 W A D Operating junction and storage temperature range T , T -55 to +150 C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A (2) Mounted on 0.2 x 0.2 (5.0 mm x 5.0 mm) copper pads to each terminal Revision: 16-Jan-18 Document Number: 89376 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 P2SMA130A thru P2SMA220A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM MAXIMUM TEST STAND-OFF MAXIMUM VOLTAGE DEVICE REVERSE PEAK PULSE CLAMPING (1) CURRENT VOLTAGE TEMPERATURE V AT I BR T DEVICE TYPE MARKING LEAKAGE SURGE VOLTAGE I V OF V (V) T WM BR CODE AT V CURRENT AT I WM PPM (mA) (V) (%/C) (1) (2) I (A) I (A) V (V) MIN. MAX. D PPM C P2SMA130A 2VK 124 137 1.0 111 1.0 1.11 179 0.140 P2SMA140A 2VL 133 147 1.0 119 1.0 1.04 192 0.140 P2SMA150A 2VM 143 158 1.0 128 1.0 0.97 207 0.140 P2SMA170A 2VN 162 179 1.0 145 1.0 0.85 234 0.150 P2SMA180A 2VP 171 189 1.0 154 1.0 0.81 246 0.150 P2SMA200A 2VQ 190 210 1.0 171 1.0 0.73 274 0.150 P2SMA220A 2VR 209 231 1.0 185 1.0 0.61 328 0.150 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 THERMAL CHARACTERISTICS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1) Thermal resistance, junction to ambient air R 250 C/W JA (1) Thermal resistance, junction to mount R 50 C/W JM Note (1) Mounted on minimum recommended pad layout ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE P2SMA130A-M3/61T 0.064 61T 1800 7 diameter plastic tape and reel P2SMA130A-M3/5AT 0.064 5AT 7500 13 diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (T = 25 C unless otherwise noted) A 100 100 10 75 1 50 0.1 25 0.2 x 0.2 (5.0 mm x 5.0 mm) off Voltage, V Copper Pad Areas WM 0.01 0 0.1 1 10 100 1000 10 000 0 255075 100 125 150 175 t - Pulse Width (s) T - Initial Temperature (C) d J Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - Pulse Derating Curve Revision: 16-Jan-18 Document Number: 89376 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 P - Peak Pulse Power (kW) PPM Peak Pulse Power (P ) or Current (I ) PP PP Derating in Percentage, %