P6SMB33CAHE3_A/H Vishay

333 3 P6SMB Series www.vishay.com Vishay General Semiconductor Surface-Mount TRANSZORB Transient Voltage Suppressors FEATURES Available Low profile package Ideal for automated placement Glass passivated chip junction Available in unidirectional and bidirectional 600 W peak pulse power capability with a 10/1000 s waveform, repetitive rate Available (duty cycle): 0.01 % Excellent clamping capability SMB (DO-214AA) Very fast response time Cathode Anode Low incremental surge resistance Meets MSL level 1, per J-STD-020, LF maximum peak (unidirectional) (bidirectional) of 260 C AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 LINKS TO ADDITIONAL RESOURCES Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 3D Models TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lightin g PRIMARY CHARACTERISTICS on ICs, MOSFET, signal lines of sensor units for consumer, V (unidirectional) 5.8 V to 459 V WM computer, industrial, and telecommunication. V (bidirectional) 5.8 V to 185 V WM V (unidirectional) 6.8 V to 540 V BR MECHANICAL DATA V (bidirectional) 6.8 V to 220 V BR Case: SMB (DO-214AA) P 600 W PPM Molding compound meets UL 94 V-0 flammability rating P 5.0 W D Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial I (unidirectional only) 100 A FSM grade T max. 150 C J Base P/NHE3 X - RoHS-compliant and AEC-Q101 qualified Polarity Unidirectional, bidirectional Base P/NHM3 X - halogen-free, RoHS-compliant, and Package SMB (DO-214AA) AEC-Q101 qualified ( X denotes revision code e.g. A, B, ...) DEVICES FOR BIDIRECTION APPLICATIONS Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 For bidirectional devices use CA suffix (e.g. P6SMB10CA). E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 Electrical characteristics apply in both directions. whisker test Polarity: for unidirectional types the band denotes cathode end, no marking on bidirectional types MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1)(2) Peak power dissipation with a 10/1000 s waveform (fig. 1) P 600 W PPM (1) Peak pulse current with a 10/1000 s waveform I See next table A PPM Power dissipation on infinite heatsink at T = 50 C P 5.0 W A D (2) Peak forward surge current 8.3 ms single half sine-wave unidirectional only I 100 A FSM Operating junction and storage temperature range T , T -65 to +150 C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A (2) Mounted on 0.2 x 0.2 (5.0 mm x 5.0 mm) copper pads to each terminal Revision: 19-Apr-2021 Document Number: 88370 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D P6SMB Series www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM DEVICE MAXIMUM MAXIMUM VOLTAGE TEST STAND-OFF REVERSE PEAK MARKING CLAMPING TEMPERATURE (1) PART V AT I CURRENT VOLTAGE LEAKAGE PULSE BR T CODE VOLTAGE COEFFICIENT NUMBER (V) I V AT V CURRENT T WM WM AT I OF V PPM BR (3) (2) (mA) (V) I I D PPM V (V) (%/C) UNI BI MIN. MAX. C (A) (A) P6SMB6.8A 6V8A 6V8C 6.45 7.14 10 5.80 1000 57.1 10.5 0.057 7V5A 7V5C 7.13 7.88 10 6.40 500 53.1 11.3 0.061 P6SMB7.5A 8V2A 8V2C 7.79 8.61 10 7.02 200 49.6 12.1 0.065 P6SMB8.2A 9V1A 9V1C 8.65 9.55 1.0 7.78 50 44.8 13.4 0.068 P6SMB9.1A 10A 10C 9.50 10.5 1.0 8.55 10 41.4 14.5 0.073 P6SMB10A P6SMB11A 11A 11C 10.5 11.6 1.0 9.40 5.0 38.5 15.6 0.075 12A 12C 11.4 12.6 1.0 10.2 5.0 35.9 16.7 0.078 P6SMB12A 13A 13C 12.4 13.7 1.0 11.1 5.0 33.0 18.2 0.081 P6SMB13A 15A 15C 14.3 15.8 1.0 12.8 1.0 28.3 21.2 0.084 P6SMB15A P6SMB16A 16A 16C 15.2 16.8 1.0 13.6 1.0 26.7 22.5 0.086 18A 18C 17.1 18.9 1.0 15.3 1.0 23.8 25.2 0.088 P6SMB18A 20A 20C 19.0 21.0 1.0 17.1 1.0 21.7 27.7 0.090 P6SMB20A 22A 22C 20.9 23.1 1.0 18.8 1.0 19.6 30.6 0.092 P6SMB22A P6SMB24A 24A 24C 22.8 25.2 1.0 20.5 1.0 18.1 33.2 0.094 27A 27C 25.7 28.4 1.0 23.1 1.0 16.0 37.5 0.096 P6SMB27A 30A 30C 28.5 31.5 1.0 25.6 1.0 14.5 41.4 0.097 P6SMB30A 33A 33C 31.4 34.7 1.0 28.2 1.0 13.1 45.7 0.098 P6SMB33A 36A 36C 34.2 37.8 1.0 30.8 1.0 12.0 49.9 0.099 P6SMB36A P6SMB39A 39A 39C 37.1 41.0 1.0 33.3 1.0 11.1 53.9 0.100 43A 43C 40.9 45.2 1.0 36.8 1.0 10.1 59.3 0.101 P6SMB43A 47A 47C 44.7 49.4 1.0 40.2 1.0 9.3 64.8 0.101 P6SMB47A 51A 51C 48.5 53.6 1.0 43.6 1.0 8.6 70.1 0.102 P6SMB51A P6SMB56A 56A 56C 53.2 58.8 1.0 47.8 1.0 7.8 77.0 0.103 62A 62C 58.9 65.1 1.0 53.0 1.0 7.1 85.0 0.104 P6SMB62A 68A 68C 64.6 71.4 1.0 58.1 1.0 6.5 92.0 0.104 P6SMB68A 75A 75C 71.3 78.8 1.0 64.1 1.0 5.8 103 0.105 P6SMB75A P6SMB82A 82A 82C 77.9 86.1 1.0 70.1 1.0 5.3 113 0.105 91A 91C 86.5 95.5 1.0 77.8 1.0 4.8 125 0.106 P6SMB91A 100A 100C 95.0 105 1.0 85.5 1.0 4.4 137 0.106 P6SMB100A 110A 110C 105 116 1.0 94.0 1.0 3.9 152 0.107 P6SMB110A 120A 120C 114 126 1.0 102 1.0 3.6 165 0.107 P6SMB120A P6SMB130A 130A 130C 124 137 1.0 111 1.0 3.4 179 0.107 150A 150C 143 158 1.0 128 1.0 2.9 207 0.108 P6SMB150A 160A 160C 152 168 1.0 136 1.0 2.7 219 0.108 P6SMB160A 170A 170C 162 179 1.0 145 1.0 2.6 234 0.108 P6SMB170A P6SMB180A 180A 180C 171 189 1.0 154 1.0 2.4 246 0.108 200A 200C 190 210 1.0 171 1.0 2.2 274 0.108 P6SMB200A 220A 220C 209 231 1.0 185 1.0 1.8 328 0.108 P6SMB220A 250A - 237 263 1.0 214 1.0 1.74 344 0.110 P6SMB250A 300A - 285 315 1.0 256 1.0 1.45 414 0.110 P6SMB300A 350A - 333 368 1.0 300 1.0 1.24 482 0.110 P6SMB350A 400A - 380 420 1.0 342 1.0 1.10 548 0.110 P6SMB400A 440A - 418 462 1.0 376 1.0 1.00 602 0.110 P6SMB440A 480A - 456 504 1.0 408 1.0 0.91 658 0.110 P6SMB480A P6SMB510A 510A - 485 535 1.0 434 1.0 0.86 698 0.110 540A - 513 567 1.0 459 1.0 0.81 740 0.110 P6SMB540A Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) For bi-directional types with V of 10 V and less, the I limit is doubled WM D (4) All terms and symbols are consistent with ANSI/IEEE CA62.35 (5) V = 3.5 V at I = 50 A (unidirectional only) F F Revision: 19-Apr-2021 Document Number: 88370 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000