PAT0603E3301BST5 Vishay

PAT www.vishay.com Vishay Dale Thin Film Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kV ESD Rating FEATURES Resistance range: 2.5 to 3 M AEC-Q200 qualified AEC-Q200 ESD rated class 1C (2 kV) Laser trimmed to any value Moisture resistant to MIL-STD-202, method 202 Tantalum nitride resistor film on high purity These chip resistors are available in wraparound alumina substrate terminations styles in 8 case sizes. They incorporate self 100 % visual inspected per MIL-PRF-55342 passivated enhanced tantalum nitride resistor film to give superior performance on moisture resistance, electrostatic Laser-trimmed tolerances to 0.1 % discharge, voltage coefficient, power handling an d Load life stability < 0.05 % at 1000 h at 70 C resistance stability. The terminations consist of an adhesion Very low noise and voltage coefficient layer, a leach resistant nickel barrier, and solder coating (< -30 dB, < 0.1 ppm/V) (lead (Pb)-free). This product will out-perform all requirements of AEC-Q200. Sulfur resistant (per ASTM B809-95 humid vapor test) Material categorization: for definitions of compliance CONSTRUCTION please see www.vishay.com/doc 99912 T antalum Nitride Resistive Film Passivation TYPICAL PERFORMANCE Solder Coating ABSOLUTE Nickel Barrier TCR 25 High Purity Alumina Substrate TOL. 0.1 Adhesion Layer STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 2.5 to 3 M - TCR: Absolute 25 ppm/C to 100 ppm/C -55 C to +125 C Tolerance: Absolute 0.1 % to 1.0 % +25 C Stability: Absolute 0.05 % 2000 h at 70 C rated power Stability: Ratio Not applicable - Voltage Coefficient Less than 0.1 ppm/V - Working Voltage 75 V to 200 V - Operating Temperature Range -55 C to +155 C - Storage Temperature Range -55 C to +155 C - Noise < -30 dB - Shelf Life Stability: Absolute 100 ppm 1 year at 25 C COMPONENT RATINGS CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0402 50 75 20 to 51K 0603 150 75 2.5 to 130K 0805 200 100 10 to 301K 1206 400 200 10 to 1M 1505 400 150 10 to 1M 2208 750 150 10 to 1.75M 2010 800 200 10 to 2M 2512 1000 200 10 to 3M Revision: 27-Nov-2019 Document Number: 60024 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000PAT www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches DT D W T E L L CASE SIZE L W T D E 0402 0.041 0.003 0.022 0.003 0.015 0.003 0.010 0.005 0.010 0.005 0603 0.064 0.006 0.032 0.005 0.015 0.003 0.012 0.005 0.015 0.005 0805 0.080 0.006 0.050 0.005 0.015 0.003 0.015 0.005 0.015 0.005 1206 0.126 0.008 0.063 0.005 0.015 0.003 0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010 1505 0.155 0.007 0.050 0.005 0.015 0.003 0.015 0.005 0.015 0.005 2010 0.209 0.009 0.098 0.005 0.015 0.003 0.020 0.005 0.020 0.005 2208 0.230 0.007 0.075 0.005 0.015 0.003 0.020 0.005 0.020 0.005 2512 0.259 0.009 0.124 0.005 0.015 0.003 0.020 0.005 0.020 0.005 ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements) LIMITS TYPICAL VISHAY ENVIRONMENTAL TEST CONDITIONS PER AEC-Q200 PERFORMANCE Resistance Temperature Characteristic -55 C to +125 C 50 ppm/C 35 ppm/C Max. Ambient Temp. at Rated Wattage +70 C +70 C Max. Ambient Temp. at Power Derating +150 C +150 C High Temperature Storage R MIL-STD-202, 108, 1000 h at 125 C 0.1 % + 0.016 % Temperature Cycling R JESD22, JA-104, 1000 cycles, -55 C to +125 C 0.15 % + 0.013 % Moisture Resistance R MIL-STD-202, 106 0.20 % + 0.0010 % Biased Humidity R MIL-STD-202, 103, 1000 h at 85 C, 85 % RH, 10 % P 0.10 % + 0.004 % Life R MIL-STD-202, 108 at 125 C, 1000 h 0.1 % + 0.0220 % Mechanical Shock R MIL-STD-202, method 213, condition C 0.1 % + 0.004 % Vibration R MIL-STD-202 method 204, 10 Hz to 2 kHz 0.1 % + 0.0030 % Resistance to Soldering Heat R MIL-STD-202 method 210, condition D 0.10 % + 0.0150 % Electrostatic Discharge R AEC-Q200-002 at 2 kV, human body 0.10 % - 0.032 % Solderability Visual J-STD-002, method B and B1 95 % Acceptable Terminal Strength R AEC-Q200-006 at 1 kg for 60 s 0.10 % + 0.009 % Flame Retardance Visual AEC-Q200-001 para 4.0 Acceptable DERATING CURVE 100 80 60 40 20 0 0170 12555 Ambient Temperature C Revision: 27-Nov-2019 Document Number: 60024 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Percent of Rated Power