PATT www.vishay.com Vishay Dale Thin Film Precision Automotive High Temperature (155 C at full rated power) Thin Film Chip Resistor, AEC-Q200 Qualified FEATURES Resistance range: 1.0 to 1 M AEC-Q200 qualified, table 7F AEC-Q200 qualified, ESD rated class 1C (< 1 k : 1 kV > 1 k : 2 kV) Laser trimmed to any value Intrinsic moisture protected resistor element Moisture resistant to MIL-STD-202, method 106 Tantalum nitride resistor film on alumina substrate The terminations consist of an adhesion layer, a leach 100 % visual inspected per MIL-PRF-55342 resistant nickel barrier and gold plating compatible with high Laser-trimmed tolerances to 0.1 % temperature solder systems. Load life stability 0.2 % at 1000 h at 155 C and 100 % rated power CONSTRUCTION Very low noise and voltage coefficient T antalum Nitride (< -30 dB, < 0.1 ppm/V) Resistive Film Passivation Sulfur resistant (per ASTM B809-95 humid vapor test) Gold Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Nickel Barrier High Purity Alumina Substrate TYPICAL PERFORMANCE Adhesion Layer ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 1.0 to 1 M - TCR: Absolute 25 ppm/C to 100 ppm/C -55 C to +175 C Tolerance: Absolute 0.1 % to 1.0 % +25 C 1000 h at 155 C Stability: Absolute 0.2 % and 100 % rated power Stability: Ratio Not applicable - Voltage Coefficient Less than 0.1 ppm/V - Working Voltage 75 V - Operating Temperature Range -55 C to +250 C - (1) Storage Temperature Range -55 C to +250 C - Noise < -30 dB - Shelf Life Stability: Absolute 100 ppm 1 year at 25 C Note (1) Storage temperature rating is for device only COMPONENT RATINGS CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0402 50 75 1.5 to 51K 0603 150 75 2.75 to 120K 0805 200 100 2.75 to 301K 1206 400 200 1.0 to 1M Revision: 14-Mar-2019 Document Number: 60124 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 PATT www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches DT D W T E L L CASE SIZE L W T D E 0402 0.042 0.008 0.022 0.005 0.015 0.003 0.010 0.005 0.010 0.005 0603 0.064 0.006 0.032 0.005 0.015 0.003 0.012 0.005 0.015 0.005 0805 0.080 0.006 0.050 0.005 0.015 0.003 0.016 0.008 0.015 0.005 1206 0.126 0.008 0.063 0.005 0.015 0.003 0.020 + 0.005 / - 0.01 0.020 + 0.005 / -0.01 ENVIRONMENTAL TESTS TYPICAL VISHAY ENVIRONMENTAL TEST CONDITIONS PERFORMANCE High temperature storage MIL-STD-202 method 108, 1000 h at 125 C 0.05 % JESD22 method JA-104, 1000 cycles, Temperature cycling 0.115 % -55 C to +155 C Moisture resistance MiIL-STD-202 method 106 0.017 % MIL-STD-202 method 103, 1000 h at 85 C, 85 % RH, Biased humidity 0.133 % 10 % rated power 0.20 % at 100 % MIL-STD-202 method 108, Life rated power and 155 C. 1000 h at 155 C Effective film temperature is 200 C. Mechanical shock MIL-STD-202 method 213, condition C 0.008 % Vibration MIL-STD-202 method 204, 10 Hz to 2 kHz 0.008 % Resistance to soldering heat MIL-STD-202 method 210, condition B 0.09 % AEC-Q200-002, human body Electrostatic discharge 0.10 % at 2 kV (< 1 k : 1 kV > 1 k : 2 kV) Solderability MIL-STD-883 method 2003 para 2.3.1 and J-STD-002 Pass Die shear MIL-PRF-55342 Pass Flame retardance AEC-Q200-001 para 4.0 Pass MECHANICAL SPECIFICATIONS Resistive element Tantalum nitride Substrate material Alumina Terminations Gold (10 in. min.) over nickel ( 50 in. min.) DERATING CURVE 100 80 60 40 20 0 - 550250 100 155 20050 Ambient Temperature C Revision: 14-Mar-2019 Document Number: 60124 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Percent of Rated Power