Not for New Designs PC www.vishay.com Vishay Dale Inductors, Subminiature, Shielded, Radial Leaded FEATURES Classification is grade 1, class B Subminiature shielded Custom values up to 100 000 H are available upon request Printed board mounting facilitated by 0.200 5.08 mm grid spacing Radial lead fixed inductor High Q values Unitized epoxy-molded construction Shielded construction to allow maximum density packaging Material categorization: for definitions of compliance ELECTRICAL SPECIFICATIONS please see www.vishay.com/doc 99912 Inductance tolerance: 10 % Dielectric strength: 840 V at sea level DENSITY SPECIFICATIONS RMS Working voltage: 300 V Weight: 1.5 g maximum DC Q and SRF values: minimum not less than 80 % of specified Shielding: 3 % coupling maximum when two units are value tested side by side Maximum current: based on temperature rise not to ENVIRONMENTAL SPECIFICATIONS exceed 35 C at +90 C ambient Moisture: per MIL-STD-202, method 106 MECHANICAL SPECIFICATIONS Vibration: low frequency, 10 Hz to 55 Hz at 0.06 1.52 mm Operating temperature: -55 C to +125 C maximum total excursion at rate of 1 linear sweep per minute for 2 h repeated for each of three mutually Terminal pull: 3 pounds perpendicular planes Shock: 100 g, 6 ms, body mounted DIMENSIONS in inches millimeters 0.300 0.010 0.265 0.010 6.73 0.254 Dia. 7.62 0.254 0.270 6.86 0.080 0.010 Max. 2.03 0.254 3/8 1/16 9.52 1.59 24 0.020 0.002 0.200 0.005 0.508 0.051 TCW 5.08 0.127 STANDARD ELECTRICAL SPECIFICATIONS TEST DCR RATED DC INCREMENTAL IND. FREQ. SRF NOM. MAX. CURRENT CURRENT TOL. Q (1) (H) (MHz) (MHz) () (mA) (mA) MODEL (%) NOM. PC 0.10 10 70 25 > 250 0.030 2500 2500 PC 0.12 10 70 25 > 250 0.030 2500 2500 PC 0.15 10 70 25 > 250 0.030 2500 2500 PC 0.18 10 70 25 > 250 0.035 2400 2400 PC 0.22 10 70 25 > 250 0.038 2300 2300 PC 0.27 10 80 25 > 250 0.040 2200 2200 PC 0.33 10 80 25 > 250 0.040 2200 2200 PC 0.39 10 80 25 250 0.045 2100 2100 PC 0.47 10 80 25 230 0.045 2100 2100 Note (1) Incremental current: The DC current required to cause a 5 % reduction in the nominal inductance value. Revision: 08-Aug-16 Document Number: 34070 1 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000Not for New Designs PC www.vishay.com Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS TEST DCR RATED DC INCREMENTAL IND. FREQ. SRF NOM. MAX. CURRENT CURRENT TOL. Q (1) MODEL (H) (%) NOM. (MHz) (MHz) () (mA) (mA) PC 0.56 10 80 25 220 0.050 2000 2000 PC 0.68 10 80 25 190 0.055 1900 1900 PC 0.82 10 85 25 180 0.060 1800 1800 PC 1.0 10 85 25 160 0.070 1700 1700 PC 1.2 10 90 7.9 170 0.085 1670 1670 PC 1.5 10 100 7.9 155 0.100 1540 1540 PC 1.8 10 115 7.9 135 0.110 1470 1470 PC 2.2 10 110 7.9 120 0.120 1410 1410 PC 2.7 10 110 7.9 104 0.125 1380 1380 PC 3.3 10 90 7.9 93 0.165 1200 1200 PC 3.9 10 90 7.9 87 0.180 1135 1135 PC 4.7 10 95 7.9 79 0.245 985 985 PC 5.6 10 95 7.9 72 0.265 950 950 PC 6.8 10 85 7.9 63 0.330 853 853 PC 8.2 10 95 7.9 60 0.460 720 720 PC 10 10 90 7.9 54 0.640 620 620 PC 12 10 120 2.5 37 0.800 545 545 PC 15 10 120 2.5 28.8 0.865 520 520 PC 18 10 115 2.5 23.8 0.940 504 504 PC 22 10 125 2.5 21.3 1.03 460 460 PC 27 10 115 2.5 20.6 1.18 418 418 PC 33 10 120 2.5 18.6 1.30 398 398 PC 39 10 120 2.5 17.7 1.41 385 385 PC 47 10 110 2.5 14.9 1.61 350 350 PC 56 10 115 2.5 13.9 2.08 330 333 PC 68 10 105 2.5 12.9 2.20 320 330 PC 82 10 105 2.5 11.7 2.42 300 320 PC 100 10 95 2.5 10.5 2.15 333 300 PC 120 10 95 0.79 5.6 2.38 316 190 PC 150 10 90 0.79 5.2 2.52 306 175 PC 180 10 95 0.79 4.9 2.88 288 150 PC 220 10 95 0.79 4.6 3.18 273 125 PC 270 10 100 0.79 4.2 3.50 260 120 PC 330 10 100 0.79 3.55 4.80 222 110 PC 390 10 100 0.79 3.45 5.44 209 105 PC 470 10 100 0.79 3.2 5.9 201 100 PC 560 10 95 0.79 2.9 6.3 194 90 PC 680 10 100 0.79 2.7 7.2 181 80 PC 820 10 90 0.79 2.5 8.0 172 70 PC 1000 10 100 0.79 2.35 12 141 65 Note (1) Incremental current: The DC current required to cause a 5 % reduction in the nominal inductance value. MARKING - Manufacturer data printed ORDERING INFORMATION PC 0.10 H 10 % EB e2 MODEL INDUCTANCE INDUCTANCE PACKAGE JEDEC LEAD (Pb)-FREE VALUE TOLERANCE CODE STANDARD GLOBAL PART NUMBER PC 9 E B R 1 0 K PACKAGE INDUCTANCE INDUCTANCE MODEL CODE VALUE TOLERANCE Revision: 08-Aug-16 Document Number: 34070 2 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000