PCAN0805K4R70FST3 Vishay

PCAN www.vishay.com Vishay Dale Thin Film High Power Aluminum Nitride, Wraparound Surface Mount, Precision Thin Film Chip Resistor (up to 6 W) FEATURES High thermal conductivity aluminum nitride Available substrate Power rating up to 6.0 W Available Resistance range 2 to 30.1 k Resistor tolerance to 0.1 % TCR to 25 ppm/C Flame resistant UL 94 V-0 Available Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note PCAN series chip resistors are designed on aluminum * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For nitride ceramic substrates with enlarged backside example, parts with lead (Pb) terminations are not RoHS-compliant. terminations to reduce the thermal resistance between the Please see the information / tables in this datasheet for details. topside resistor layer and the solder joint on the end users circuit assembly. APPLICATIONS Actual power handling capability is limited by the end user Power supplies mounting process. As with any high power chip resistor the Power switching ability to remove the heat is critical to the overall performance of the device. Braking system TYPICAL PERFORMANCE ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Resistance Range 2 to 30.1 k - TCR: Absolute 25 ppm/C (standard) and 100 ppm/C - Tolerance: Absolute 0.1 %, 0.25 %, 0.5 %, 1.0 % and 5.0 % -55 C to +150 C (1) Power Rating: Resistor 0.5 W to 6.0 W Maximum at +70 C Stability: Absolute R 1.0 % 1000 h at +70 C Voltage Coefficient < 0.1 ppm/V - Working Voltage 75 V to 200 V - Operating Temperature Range -55 C to +155 C - Storage Temperature Range -55 C to +155 C - Noise < -30 dB - Shelf Life Stability: Absolute 0.01 % 1 year at +25 C Note (1) Dependant on component mounting by user. COMPONENT RATINGS CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () (2) 0603 500 75 2 to 30.1K (2) 0805 1000 100 2 to 30.1K (2) 1206 2000 200 2 to 30.1K (2) 2512 6000 200 2 to 30.1K Note (2) Dependant on component mounting by user. Revision: 19-Apr-16 Document Number: 60125 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 PCAN www.vishay.com Vishay Dale Thin Film ENVIRONMENTAL TESTS LIMITS MIL-PRF-55342 TYPICAL VISHAY ENVIRONMENTAL TEST CHARACTERISTIC H PERFORMANCE Resistance temperature characteristic 50 ppm/C 25 ppm/C Maximum ambient temperature at rated wattage +70 C +70 C Maximum ambient temperature at power derating +150 C +150 C Thermal shock 0.25 % 0.10 % Low temperature operation 0.25 % 0.10 % Short time overload 0.1 % 0.10 % High temperature exposure 0.2 % 0.10 % Resistance to soldering heat 0.25 % 0.10 % Moisture resistance 0.4 % 0.50 % Life at +70 C for 1000 h 0.5 % 1.00 % DIMENSIONS in inches DT D W T E L L THICKNESS LENGTH WIDTH TOP PAD BOTTOM PAD CASE SIZE T L W D E MIN./MAX. 0603 0.064 0.006 0.032 0.005 0.015 0.003 0.012 0.005 0.021 0.005 0805 0.080 0.006 0.050 0.005 0.015 0.003 0.016 0.005 0.025 0.005 1206 0.126 0.008 0.063 0.005 0.015 0.003 0.020 + 0.005 / - 0.010 0.040 0.005 2512 0.259 + 0.009 / - 0.015 0.124 0.005 0.015 0.003 0.020 0.005 0.050 0.005 LAND PATTERN DIMENSIONS in inches 0603 Land Pattern 1206 Land Pattern 0.0920 0.1730 0.0340 0.0710 0.0140 0.0390 0.0220 0.0755 0805 Land Pattern 2512 Land Pattern 0.1050 0.2910 0.0520 0.1260 0.0200 0.0425 0.1090 0.0910 Revision: 19-Apr-16 Document Number: 60125 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000