PE30L0FL222KAB Vishay

PE30 www.vishay.com Vishay Sfernice Fully Sealed Potentiometer Professional Grade FEATURES High power rating 3 W at 70 C Low temperature coefficient (150 ppm/C typical) Cermet element Full sealing Use of faston 2.86 connections click logo to get started DESIGN SUPPORT TOOLS Tests according to CECC 41000 or IEC 60393-1 Wires and connectors available Models Available Custom design on request Center detent option QUICK REFERENCE DATA Multiple module No Material categorization: for definitions of compliance Switch module n/a please see www.vishay.com/doc 99912 Detent module Yes A: linear, L: logarithmic, F: reverse Special electrical laws logarithmic Sealing level IP 67 Lifespan 25K cycles DIMENSIONS in millimeters (inches) 0.5 mm ( 0.02 ) 8 20 (0.79) max. 12 (0.47) PE30L 76 14 wrench (0.31) 13 (0.51) max. Thread M10 x 0.75 6 ac R 5.2 (0.24) (0.20) 0.5 3 FG = 16 (0.63) (0.02) b (0.12) 19.7 FL = 25 (0.99) 2.85 (0.11) FR = 50 (1.97) (0.78) 3 PE30LL: LPRP - Locating Peg 0.8 (0.12) (0.3) 1.8 (0.07) 10.5 12.5 (0.41) (0.49) 9.2 8.8 (0.36) (0.35) 3.5 3 2.3 (0.14) (0.12) (0.9) PANEL MOUNT 23 (0.91) max. PE30ME: Panel Sealed 16 (0.63) max. Sealing ring 0.7 (0.03) Slot 1.2 1 x 1.8 1 (0.4) (0.05) deep 6 Flats (0.24) located 19.7 8 0.2 (0.78) (0.31 0.01) 10.5 (0.41) 9 (0.35) FD = 13 (0.61) FJ = 22 (0.87) PANEL MOUNT FP = 47 (1.85) Revision: 01-Feb-18 Document Number: 51037 1 For technical questions, contact: sferpottrimmers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 PE30 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 270 10 linear taper 22 to 10 M Resistance range logarithmic taper 100 to 2.2 M Standard series E3 1 - 2.2 - 4.7 and on request 1 - 2 - 5 standard 20 % Tolerance on request 10 % to 5 % 100 80 F 60 A L Taper 40 20 0 0 20 40 60 80 100 % CLOCKWISE SHAFT ROTATION 3 LIN. TAPER A 2 linear 3 W at 70 C Power rating LOG. TAPER logarithmic 1.5 W at 70 C 1 L and F 0 0 20 40 60 70 80 100 120 140 AMBIENT TEMPERATURE IN C a c Circuit diagram (1) (3) cw b (2) Temperature coefficient (typical) 150 ppm/C Limiting element voltage 300 V Contact resistance variation (typical) 3 % Rn or 3 End resistance (typical) 1 Dielectric strength (RMS) 2500 V 5 Insulation resistance (300 V)10 M DC Independent linearity (typical) 5 % Revision: 01-Feb-18 Document Number: 51037 2 For technical questions, contact: sferpottrimmers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 % TOTAL RESISTANCE POWER IN W