EB4
www.vishay.com
Vishay Dale
Edgeboard Connectors, Dual Readout, 0.100" (2.54 mm) C-C,
Standard and Right Angle Terminals
FEATURES
Grid patterns: 0.100" C-C x 0.150" (2.54 mm x 3.81 mm)
and 0.100" C-C x 0.200" (2.54 mm x 5.08 mm)
Standard and right angle terminals
Greater design latitude:
body materials: glass-filled polyester and glass-filled
polyphenylene sulfide
7 contact termination styles - 3 standard, 4 right angle
20 body sizes and 6 mounting styles
Selective gold plating
Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
to 1.80 mm)
Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without
loss of contact position
ELECTRICAL SPECIFICATIONS
Current Rating: 3 A
APPLICATIONS
Test Voltage Between Contacts:
For use with 0.0625" (1.59 mm) printed circuit boards
at sea level: 650 V
RMS
requiring an edgeboard type connector on 0.100" (2.54 mm)
At 70 000 feet (21 336 meters): 275 V
RMS
centers
Insulation Resistance: 5000 M minimum at 500 V
DC
potential
MATERIAL SPECIFICATIONS
Contact Resistance: 30 mV maximum at rated current (with
Body Material:
gold plating)
3 thermoplastic polyester, glass-filled, black, flame
Operating Temperature: -65 C to +125 C
retardant (UL 94 V-0)
Humidity: 96 h at 90 % relative humidity at +40 C, dried at
5 thermoplastic polyphenylene sulfied, glass filled, brown,
room temperature for 3 h minimum, insulation resistance
flame retardant (UL 94 V-0)
was greater than 5000 M
Contacts: phosphor bronze (see Ordering Information)
Durability: after 500 cycles of insertion and withdrawal of a
Polarizing Key: glass reinforced nylon, flame retardant
0.070" (1.78 mm) thick steel test board, contact resistance
(UL 94H-B)
less than 0.030 V at 3 A on gold plated contacts and
individual contact pair separation force when measured with
Plating: gold (see Ordering Information)
a 0.054" (1.37 mm) thick steel test blade was greater than
oz.
Shock: three 50G shocks in each of 3 mutually
perpendicular planes with no loss of continuity
Vibration: 2 h in each of 3 mutually perpendicular planes,
frequency sweep 10 cps to 55 cps at 0.06 double amplitude
with no loss of continuity
ORDERING INFORMATION
EB4 3 K 20 SG X 15
MODEL BODY STANDARD CONTACTS CONTACT PLATING MOUNTING POLARIZING
MATERIAL TERMINAL PER SIDE VARIATIONS
KEY POSITIONS
VARIATIONS SG = selective gold plating (0.00003"
6, 10, 12, (0.000762 mm) minimum thick) on contact
3 = glass-filled Key(s) are located to
C, D, K, 15, 18, 20, area with gold flash on terminal.
polyester right of position(s)
1R, 2R, 22, 25, 28, SGF = selective gold plating (0.000010"
5 = glass-filled designated. Use odd-
3R, 4R 30, 31, 35, (0.000254 mm) minimum thick) on contact
polyphenylene numbered contact for
36, 40, 43, area with gold flash on terminal.
sulfide ordering: -1, -3, -5, etc.
44, 48, 49, All gold plating over 0.00005"
Required only when
50, 60, (0.00127 mm) minimum nickel underplate.
polarizing keys are to be
and 65 Contact factory for additional plating
factory installed.
options
Note: to order polarizing
keys individually, specify
model PK-4.
Revision: 16-Feb-09 Document Number: 36001
1
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EB4
www.vishay.com
Vishay Dale
DIMENSIONS in inches (millimeters)
0.060
(1.52)
0.342
0.050
0.287
R Typ.
(1.27) (8.69)
(7.29)
Typ. Typ.
A
B
C
0.100
D
(2.54)
Typ.
E
J J
0.060
(1.52)
Typ.
See table for
0.365
contact and
0.250
(9.27)
Section J - J mounting variations
(6.35)
Typ.
0.054 - 0.071 (1.37 - 1.80) 0.180
(4.57)
Card Thickness
0.430
Typ.
(10.92)
Typ.
0.125
(3.17) 0.300 (7.62) 0.610 (15.49)
Depth of
Point of Typ.
Contact Insertion
0.150 (3.81)
Polarizing Key:
0.295
When ordering polarizing keys individually,
(7.49)
specify by the Model Number:
PK-4 between contacts. Hand insertion tool, 0.031
(0.787)
TPK-4, provided upon request.
0.096 0.002
0.200
(2.44 0.051)
(5.08)
# OF CONTACT
POSITIONS AB C D E
PER SIDE
6 1.435 (36.45) 1.175 (29.85) 0.700 (17.78) 0.860 (21.84) 0.750 (19.05)
10 1.835 (46.61) 1.575 (40.00) 1.100 (27.94) 1.260 (32.00) 1.150 (29.21)
12 2.035 (51.69) 1.775 (45.08) 1.300 (33.02) 1.460 (37.08) 1.350 (34.29)
15 2.335 (59.31) 2.075 (52.70) 1.600 (40.64) 1.760 (44.70) 1.650 (41.91)
18 2.635 (66.93) 2.375 (60.32) 1.900 (48.26) 2.060 (52.32) 1.950 (49.53)
20 2.835 (72.01) 2.575 (65.40) 2.100 (53.34) 2.260 (57.40) 2.150 (54.61)
22 3.035 (77.09) 2.775 (70.48) 2.300 (58.42) 2.460 (62.48) 2.350 (59.69)
25 3.335 (84.71) 3.075 (78.10) 2.600 (66.04) 2.760 (70.10) 2.650 (67.31)
28 3.635 (92.33) 3.375 (85.72) 2.900 (73.66) 3.060 (77.72) 2.950 (74.93)
30 3.835 (97.41) 3.575 (90.80) 3.100 (78.74) 3.260 (82.80) 3.150 (80.01)
31 3.935 (99.95) 3.675 (93.34) 3.200 (81.28) 3.360 (85.34) 3.250 (82.55)
35 4.335 (110.11) 4.075 (103.50) 3.600 (91.44) 3.760 (95.50) 3.650 (92.71)
36 4.435 (112.65) 4.175 (106.04) 3.700 (93.98) 3.860 (98.04) 3.750 (95.25)
40 4.835 (122.81) 4.575 (116.20) 4.100 (104.14) 4.260 (108.20) 4.150 (105.41)
43 5.135 (130.43) 4.875 (123.82) 4.400 (111.76) 4.560 (115.82) 4.450 (113.03)
44 5.235 (132.97) 4.975 (126.36) 4.500 (114.30) 4.660 (118.36) 4.550 (115.57)
48 5.635 (143.13) 5.375 (136.52) 4.900 (124.46) 5.060 (128.52) 4.950 (125.73)
49 5.735 (145.67) 5.475 (139.06) 5.000 (127.00) 5.160 (131.06) 5.050 (128.27)
50 5.835 (148.21) 5.575 (141.60) 5.100 (129.54) 5.260 (133.60) 5.150 (130.81)
60 6.835 (173.61) 6.575 (167.00) 6.100 (154.94) 6.260 (159.00) 6.150 (156.21)
65 7.335 (186.31) 7.075 (179.70) 6.600 (167.64) 6.760 (171.70) 6.650 (168.91)
Revision: 16-Feb-09 Document Number: 36001
2
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000