PLT www.vishay.com Vishay Dale Thin Film Precision Low TCR Thin Film Resistor, Surface Mount Chip, 5 ppm/C TCR, 0.01 % Tolerance FEATURES TCR of 5 ppm/C standard Tolerances to 0.01 % Available Anti corrosion resistant film with (SPM) special passivation method Available Stable film and performance characteristics (R 0.04 % at 70 C, 10 000 h) Actual Size 0603 Non-standard resistance values available Very low noise and voltage coefficient Vishays proven precision thin film wraparound resistors will (< -30 dB, 0.1 ppm/V) meet your exact requirements. These resistors are ideal for UL 94 V-0 flame resistant precision applications requiring low noise, stability, ultra low temperature coefficient of resistance, and low voltage Material categorization: for definitions of compliance coefficient. The chip resistors are available in any resistance please see www.vishay.com/doc 99912 ohmic value in the range specified below. Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For CONSTRUCTION example, parts with lead (Pb) terminations are not RoHS-compliant. Passivated Nichrome Please see the information / tables in this datasheet for details SPM Passivation Resistive Film Enhancement Solder TYPICAL PERFORMANCE Coating ABSOLUTE Nickel Barrier High Purity TCR 5 Alumina Substrate Adhesion Layer TOL. 0.01 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Resistance Range 50 to 3 M - TCR: Absolute 5 ppm/C -55 C to +125 C Tolerance: Absolute 0.1 % to 0.01 % +25 C Stability: Absolute R 0.02 % 2000 h at 70 C Stability: Ratio -- Voltage Coefficient 0.1 ppm/V (typical) - Working Voltage 75 V to 200 V - Operating Temperature Range -55 C to +125 C - Storage Temperature Range -55 C to +150 C - Noise < -35 dB (typical) - Shelf Life Stability: Absolute R 0.01 % 1 year at +25 C COMPONENT RATINGS CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0603 150 75 250 to 130K 0805 250 100 250 to 260K 1206 400 200 250 to 775K 2010 800 200 500 to 2M 2512 1000 200 500 to 3M Revision: 27-Jun-2018 Document Number: 60030 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 PLT www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D W T E L CASE SIZE TERM L W T D E 0603 B, S 0.064 0.006 0.032 0.005 0.020 max. 0.012 0.005 0.015 0.005 0805 B, S 0.080 0.006 0.050 0.005 0.015 to 0.033 0.016 0.008 0.015 0.005 1206 B, S 0.126 0.008 0.063 0.005 0.015 to 0.033 0.020 +0.005 / -0.010 0.020 +0.005 / -0.010 2010 B, S 0.209 0.009 0.098 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 2512 B, S 0.259 0.009 0.124 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 ENVIRONMENTAL TESTS - TYPICAL DERATING CURVE 10 k R 100 k R 100 ENVIRONMENTAL TEST (%) (%) 80 Thermal Shock 0.02 0.02 Short Time Overload 0.01 0.01 60 Low Temperature Operation 0.01 0.01 40 Resistance to Solder Heat 0.01 0.01 Moisture Resistance 0.02 0.02 20 High Temperature Exposure 0.02 0.02 0 Load Life (10 000 h, +70 C) 0.04 0.04 0 70 125 150 TCR 5 ppm/C 5 ppm/C Ambient Temperature C GLOBAL PART NUMBER INFORMATION PL T 0 6 0 3 Z1 0 0 1 Q BT 1 GLOBAL CASE TCR RESISTANCE TOLERANCE TERMINATION PACKAGING MODEL SIZE CHARACTERISTIC PLT 0603 Z = 5 ppm/C The first 3 digits are L = B = wraparound Sn / Pb WS = WAFFLE PACK (2) 0805 significant figures and 0.01 % solder w/ Ni barrier WI = 100 min., 1 mult 1206 the last digit specifies Q = 0.02 % (63 % Sn / 37 % Pb w/ (item single lot date code) 2010 the number of zeros to A = 0.05 % nickel barrier) WP = 100 min., 1 mult 2512 follow. R designates B = 0.1 % (package unit single the decimal point. D = 0.5 % S = wraparound lot date code) F = 1 % lead (Pb)-free solder Example: 96.5 % Sn / 3.0 % Ag / TAPE AND REEL 1001 = 1 k 0.5 % Cu T0 = 100 min., 100 mult (1) 2500 = 250 RoHS compliant - e1 T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult Special values with more T5 = 500 min., 500 mult than 4 significant figures, TF = Full reel use a R for value below TS = 100 min., 1 mult 1 k and a K for values TI = 100 min., 1 mult greater than 1 k to (item single lot date code) signify a decimal point. TP = 100 min., 1 mult (package unit single 982R6 = 982.6 lot date code) 532R41 = 532.41 Notes (1) Preferred packaging code (2) L and Q tolerances are available only for resistance values > 250 Revision: 27-Jun-2018 Document Number: 60030 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Precent of Rated Power