PLTT www.vishay.com Vishay Dale Thin Film Precision Low TCR High Temperature Thin Film Resistor, Surface Mount Chip, 5 ppm/C TCR, 0.02 % Tolerance FEATURES PLTT0603 case size is qualified to AEC-Q200 for automotive applications Available -55 C to 215 C operating temperature range TCR of 5 ppm/C standard Available Tolerances to 0.02 % Anti corrosion resistant film with (SPM) special passivation method LINKS TO ADDITIONAL RESOURCES Stable film and performance characteristics 0.5 % max. at 2000 h, 215 C, 25 % rated power Infographics Non-standard resistance values available Very low noise and voltage coefficient Vishays proven precision thin film wraparound resistors will (< -30 dB, 0.1 ppm/V) meet your exact requirements. These resistors are ideal for UL 94 V-0 flame resistant use in oil industry precision applications requiring low noise, long term stability under high temperature, ultra low Gold terminations (10 to 20) temperature coefficient of resistance, and low voltag e Material categorization: for definitions of compliance coefficient. The chip resistors are available in any resistanc e please see www.vishay.com/doc 99912 ohmic value in the range specified below. TYPICAL PERFORMANCE CONSTRUCTION ABSOLUTE SPM Passivation Passivated Nichrome Enhancement Resistive Film TCR 5 Plated TOL. 0.02 Gold (10 to 20) Nickel Barrier High Purity Alumina Substrate Adhesion Layer STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Resistance Range 75 to 3 M - TCR: Absolute 5 ppm/C -55 C to +215 C Tolerance: Absolute 0.1 % to 0.02 % +25 C Stability: Absolute R 0.5 % 2000 h at 215 C, 25 % rated power Stability: Ratio -- Voltage Coefficient 0.1 ppm/V (typical) - Working Voltage 100 V to 200 V - Operating Temperature Range -55 C to +215 C - Storage Temperature Range -55 C to +215 C - Noise < -35 dB (typical) - Shelf Life Stability: Absolute R 0.01 % 1 year at +25 C Revision: 16-Mar-2021 Document Number: 60082 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 PLTT www.vishay.com Vishay Dale Thin Film COMPONENT RATINGS POWER RATING AT 70 C WORKING VOLTAGE RESISTANCE RANGE CASE SIZE (mW) (V) () 0603 150 75 75 to 130K 0805 250 100 250 to 260K 1206 400 200 500 to 775K 2010 800 200 500 to 2M 2512 1000 200 500 to 3M Note Consult factory for additional case size DIMENSIONS in inches D W T E L CASE SIZE TERM L W T D E 0603 G 0.064 0.006 0.032 0.005 0.015 to 0.033 0.012 0.005 0.015 0.005 0805 G 0.080 0.006 0.050 0.005 0.015 to 0.033 0.016 0.008 0.015 0.005 1206 G 0.126 0.008 0.063 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010 2010 G 0.209 0.009 0.098 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 2512 G 0.259 0.009 0.124 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 ENVIRONMENTAL TESTS - MIL-PRF-55342 ENVIRONMENTAL TEST CONDITIONS TYPICAL VISHAY PERFORMANCE Thermal Shock MIL-STD-202 method 107 cond F, -65 C to +150 C 0.02 % Short Time Overload MIL-PRF-55342 para 4.8.6, 2.5 x rated working voltage 0.01 % Low Temperature Operation MIL-PRF-55342 para 4.8.5, -65 C 0.01 % Resistance to Soldering Heat MIL-STD-202 method 210 0.01 % Moisture Resistance MIL-STD-202 method 106, no power applied 0.02 % High Temperature Exposure MIL-PRF-55342 para 4.8.7, at 150 C for 100 h 0.02 % MIL-STD-202 method 108, Life 0.50 % 25 % rated power for 2000 h at 215 C TCR MIL-STD-202 method 304 5 ppm/C ENVIRONMENTAL TESTS - AEC-Q200 PLTT0603 Case Size Only ENVIRONMENTAL TEST CONDITIONS TYPICAL VISHAY PERFORMANCE High temperature storage MIL-STD-202 method 108, 1000 h at 125 C 0.10 % JESD22 method JA-104, 1000 cycles, Temperature cycling 0.25 % -55 C to +155 C Moisture resistance MIL-STD-202 method 106, no power applied 0.10 % MIL-STD-202 method 103, 1000 h at 85 C, Biased humidity 0.20 % 85 % RH, 10 % rated power MIL-STD-202 method 108, Life 0.50 % 1000 h at 175 C, 50 % rated power Mechanical shock MIL-STD-202 method 213, condition C 0.02 % Vibration MIL-STD-202 method 204, 10 Hz to 2 kHz 0.02 % Resistance to soldering heat MIL-STD-202 method 210, condition B 0.02 % Electrostatic discharge AEC-Q200-002, human body (< 1 k: 1 kV > 1 k: 2 kV) < 1 k: 1 kV > 1 k: 2 kV Solderability MIL-STD-883 method 2003 para 2.3.1 and J-STD-002 Pass TCR MIL-STD-202 method 304 5 ppm /C Die shear MIL-PRF-55342, 0.5 kg for 30 s minimun Pass Flame retardance AEC-Q200-001 para 4.0 Pass Revision: 16-Mar-2021 Document Number: 60082 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000