PLTU www.vishay.com Vishay Dale Thin Film Ultra Precision Low TCR Thin Film Resistor, Surface Mount Chip, 2 ppm/C TCR, 0.01 % Tolerance FEATURES TCR of 2 ppm/C standard Tolerances to 0.01 % Available Anti-corrosion resistant film with (SPM) special passivation method Available Stable film and performance characteristics (R 0.04 % at 70 C, 10 000 h) Actual Size 0603 Non-standard resistance values available Very low noise and voltage coefficient Vishays proven precision thin film wraparound resistors will (< -30 dB, 0.1 ppm/V) meet your exact requirements. These resistors are ideal for UL 94 V-0 flame resistant precision applications requiring low noise, stability, ultra-low temperature coefficient of resistance, and low voltag e Material categorization: for definitions of compliance coefficient. The chip resistors are available in any resistanc e please see www.vishay.com/doc 99912 ohmic value in the range specified below. Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For CONSTRUCTION example, parts with lead (Pb) terminations are not RoHS-compliant. Passivated Nichrome Please see the information / tables in this datasheet for details SPM Passivation Resistive Film Enhancement Solder TYPICAL PERFORMANCE Coating ABSOLUTE Nickel Barrier High-Purity TCR 2 Alumina Substrate Adhesion Layer TOL. 0.01 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Resistance Range 100 to 3 M - TCR: Absolute 2 ppm/C -55 C to +125 C Tolerance: Absolute 0.1 % to 0.01 % +25 C Stability: Absolute R 0.02 % 2000 h at 70 C Stability: Ratio -- Voltage Coefficient 0.1 ppm/V (typical) - Working Voltage 75 V to 200 V - Operating Temperature Range -55 C to +125 C - Storage Temperature Range -55 C to +155 C - Noise < -35 dB (typical) - Shelf Life Stability: Absolute R 0.01 % 1 year at +25 C COMPONENT RATINGS CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0603 150 75 100 to 130K 0805 250 100 100 to 260K 1206 400 200 100 to 775K 2010 800 200 150 to 2M 2512 1000 200 200 to 3M Revision: 02-Oct-2019 Document Number: 60131 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 PLTU www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D W T E L CASE SIZE L W T D E 0603 0.064 0.006 0.032 0.005 0.020 max. 0.012 0.005 0.015 0.005 0805 0.080 0.006 0.050 0.005 0.015 to 0.033 0.016 0.008 0.015 0.005 1206 0.126 0.008 0.063 0.005 0.015 to 0.033 0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010 2010 0.209 0.009 0.098 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 2512 0.259 0.009 0.124 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 ENVIRONMENTAL TESTS - TYPICAL DERATING CURVE 10 k R 100 k R 100 ENVIRONMENTAL TEST (%) (%) Thermal Shock 0.02 0.02 80 Short Time Overload 0.01 0.01 60 Low Temperature Operation 0.01 0.01 Resistance to Solder Heat 0.01 0.01 40 Moisture Resistance 0.02 0.02 20 High Temperature Exposure 0.02 0.02 Load Life (10 000 h, +70 C) 0.04 0.04 0 TCR 2 ppm/C 2 ppm/C 070 125155 Ambient Temperature C GLOBAL PART NUMBER INFORMATION PL T U 0 6 0 3 U1 0 0 1 Q BT 1 GLOBAL CASE TCR RESISTANCE TOLERANCE TERMINATION PACKAGING MODEL SIZE CHARACTERISTIC PLTU 0603 U = 2 ppm/C First 3 digits are L = B = wraparound Sn/Pb WS = WAFFLE PACK (2) 0805 significant figures and 0.01 % solder w/Ni barrier WI = 100 min., 1 mult. 1206 Q = 0.02 % (63 % Sn/37 % Pb w/ (item single lot date code) the last digit specifies 2010 A = 0.05 % nickel barrier) WP = 100 min., 1 mult. the number of zeros to 2512 B = 0.1 % (package unit single lot follow. D = 0.5 % S = wraparound date code) F = 1 % lead (Pb)-free solder Example: 96.5 % Sn/3.0 % Ag/ TAPE AND REEL 1000 = 100 0.5 % Cu T0 = 100 min., 100 mult. 1001 = 1 k RoHS-compliant - e1 (1) T1 = 1000 min., 1000 mult. T3 = 300 min., 300 mult. Use R to indicate T5 = 500 min., 500 mult. decimal point for value TF = Full reel below 1 k (max. 5 TS = 100 min., 1 mult. digits). TI = 100 min., 1 mult. 982R6 = 982.6 (item single lot date code) TP = 100 min., 1 mult. Values above 1 k (max. (package unit single lot 4 digits). date code) 1532 = 15.3 k 1003 = 100 k Notes (1) Preferred packaging code (2) L and Q tolerances are available only for resistance values 250 Revision: 02-Oct-2019 Document Number: 60131 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Precent of Rated Power