PR01, PR02, PR03
www.vishay.com
Vishay BCcomponents
Power Metal Film Leaded Resistors
FEATURES
High power in small packages (1 W / 0207 size
to 3 W / 0617 size)
Defined fusing characteristics
Technology: metal film
Meets active and passive flammability
requirements as defined in IEC 60115-1
AEC-Q200 qualified (PR01 and PR02)
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
click logo to get started
DESIGN SUPPORT TOOLS APPLICATIONS
All general purpose power applications
Models
Available Automotive electronics
DESCRIPTION
Lighting ballast
A homogeneous film of metal alloy is deposited on a high
grade ceramic body. After a helical groove has been cut in
the resistive layer, tinned connecting wires of electrolytic
copper or copper-clad iron are welded to the end-caps. The
resistors are coated with a red, non-flammable lacquer
which provides electrical, mechanical and climatic
protection. This coating is not resistant to aggressive fluxes
and cleaning solvents. The encapsulation is resistant to all
cleaning solvents in accordance with IEC 60068-2-45.
TECHNICAL SPECIFICATIONS
PR02 PR02 PR03 PR03
DESCRIPTION PR01
Cu-lead FeCu-lead Cu-lead FeCu-lead
DIN size 0207 0411 0411 0617 0617
(1)
Resistance range 0.22 to 1 M 0.33 to 1 M 1 to 1 M 0.68 to 1 M 1 to 1 M
(2)
Resistance tolerance 1 %; 5 % 1 %; 5 % 1 %; 5 % 1 %; 5 % 1 %; 5 %
Temperature coefficient 250 ppm/K 250 ppm/K 250 ppm/K 250 ppm/K 250 ppm/K
Rated dissipation, P
70
1 R 1 W 2 W 1.3 W 3 W 2.5 W
R < 1 0.6 W 1.2 W - 1.6 W -
Thermal resistance (R ) 135 K/W 75 K/W 115 K/W 60 K/W 75 K/W
th
Operating voltage, U AC/DC 350 V 500 V 500 V 750 V 750 V
max.
E-series E24, E96 ( 1 %); E24 ( 5 %)
Basic specification IEC 60115-1
Stability after:
Endurance test (1000 h, P ) R max.: (5 % R + 0.1 )
70
Damp heat test (56 days) R max.: (3 % R + 0.1 )
Soldering (10 s, 260 C) R max.: (1 % R + 0.05 )
Notes
(1)
R value is measured with probe distance of 24 mm 1 mm using 4-terminal method
(2)
1 % tolerance is available for R -range from 1 upwards
n
Revision: 11-Jul-2018 Document Number: 28729
1
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01, PR02, PR03
www.vishay.com
Vishay BCcomponents
TERMINATION WIRE TYPES
PRODUCT TYPE PACKAGING CODE STYLE MATERIAL WIRE DIAMETER PITCH
A1, A5, R5 Axial Cu 0.58 mm n/a
N4 Radial Cu 0.58 mm 4.8 mm
PR01 L1 Radial Cu 0.58 mm 17.8 mm
L1 Radial FeCu 0.58 mm 17.8 mm
K1 Radial FeCu 0.58 mm 12.5 mm
A1, R5 Axial Cu 0.78 mm n/a
A1 Axial FeCu 0.58 mm n/a
N3, R2 Radial Cu 0.78 mm 4.8 mm
PR02
L1 Radial Cu 0.78 mm 17.8 mm
L1 Radial FeCu 0.58 mm 17.8 mm
B1 Radial FeCu 0.78 mm 15 mm
AC Axial Cu 0.78 mm n/a
AC Axial FeCu 0.58 mm n/a
PR03 DC Radial Cu 0.78 mm 25.4 mm
DC Radial FeCu 0.58 mm 25.4 mm
PC Radial FeCu 0.78 mm 20 mm
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow
support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is
not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder
joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime. The designer may estimate the performance of the particular resistor application or set certain load and
temperature limits in order to maintain a desired stability.
OPERATION MODE POWER
P
70
PR01 1 W
Rated dissipation PR02 2 W
PR03 3 W
Applied maximum film temperature, 250 C
F max.
PR01 0.22 to 1 M
Max. resistance change at rated
PR02 0.33 to 1 M
dissipation for resistance range:
PR03 0.68 to 1 M
| R/R| (at P ) after: 1000 h 5.0 % R + 0.1
max. 70
Revision: 11-Jul-2018 Document Number: 28729
2
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000