PRAHT100I4100RBWGT Vishay

333 3 PRAHT 100, PRAHT 135, PRAHT 182 (CNWHT) www.vishay.com Vishay Sfernice High Temperature (230 C) High Precision Thin Film Wraparound Chip Resistor Arrays, Sulfur Resistant FEATURES Tight TCR (10 ppm/C) and TCR tracking (to 2 ppm/C) 2 to 4 resistors (same or different values) Ratio tolerance to 0.05 % Gold terminations for temperature up to 230 C Available High temperature (230 C) SnAg terminations for temperature up to 200 C Available SMD wraparound chip resistor array Thin film technology DESIGN SUPPORT TOOLS AVAILABLE Very low noise < -35 dB and voltage coefficient < 0.01 ppm/V 3D Models Sulfur resistant (per ASTM B809-95 humid vapor test) Material categorization: for definitions of compliance PRAHT arrays can be used in most applications requiring a please see www.vishay.com/doc 99912 matched pair (or set) of resistor elements at very high temperature up to 230 C. The networks provide 2 ppm/C TCR tracking, a ratio tolerance as tight as 0.05 % and TYPICAL PERFORMANCE outstanding stability. ABSOLUTE TRACKING They are available in pitch: TCR 10 ppm/C 2 ppm/C 1.00 mm for PRAHT 100 (based on case 0603) ABSOLUTE RATIO 1.35 mm for PRAHT 135 (based on case 0805) TOL. 0.5 % 0.05 % 1.82 mm for PRAHT 182 (based on case 1206) DIMENSIONS Independent resistors PRAHT 100 PRAHT 135 PRAHT 182 B (0603 base) (0805 base) (1206 base) DIM. mm mil mm mil mm mil F A 1.52 60 1.91 75 3.06 120 A 0.152 6 0.152 6 0.152 6 D E C B = N x E ( 0.2 mm) B B = N x E ( 8 mil) One common point B 0.5 20 0.5 20 0.5 20 C 0.127 5 0.127 5 0.127 5 0.38 15 0.38 15 0.40 16 D 0.13 5 0.13 5 0.13 5 F A D E 1 40 1.35 53 1.825 72 E C 0.7 27.6 1.05 41.4 1.525 60 F 0.1 4 0.1 4 0.1 4 Suggested land pattern (according to IPC-7351A) G 0.49 19.3 0.88 34.5 1.99 78.3 min. X 0.66 26 1.01 39.8 1.49 58.7 max. Z G X max. min. max. Z 2.57 101.2 2.96 116.5 4.11 161.8 max. E Revision: 22-Jul-2019 Document Number: 53057 1 For technical questions, contact: sferthinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D PRAHT 100, PRAHT 135, PRAHT 182 (CNWHT) www.vishay.com Vishay Sfernice (1) GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PRAHT100I4-1K00BWGT P R A H T 100 I 4 - 1 K0 0 B W GT NUMBERS OF (2) (3) GLOBAL MODEL CONFIG. VALUE ABS. TOL. RATIO TOL. TERMINATION PACKAGING RESISTORS PRAHT 100 I: independent 2 to 4 Decimal D = 0.5 % B = 0.1 % N: For more PRAHT 135 C: common R or K F = 1 % W = 0.05 % SnAg over information see PRAHT 182 B = 0.1 % nickel barrier Codification of G: Packaging table gold over nickel barrier N and G: lead (Pb)-free/RoHS version For different ohmic values on a given network a specific part number is used CNWHT 2027 T For more information see GLOBAL REFERENCE Codification of MODEL Packaging table Notes (1) Part number can only have 18 digits. Depending on infomation needed a compromise has to be found. A codification can be used to identif y case size + configuration and number of resistors. See table below. E.g. PRAHT100I4-4K75BWGTA (Part number has more than 18 digts): PRAHT100I4 must be replaced by PRAHT17 = PRAHT17-4K75BWGTA (2) When the last digit(s) of the ohmic value is (are) 0, it (they) must be omitted. E.g.: PRAHT100I4-2K20BWGT must be ordered under PRAHT100I4-2K2BWGT PRAHT100I4-1K00BWGT must be ordered under PRAHT100I4-1KBWGT (3) N termination for temperature up to 200 C. G termination for temperature up to 230 C CODIFICATION OF SIZE + CONFIGUATION + NUMBER OF RESISTORS CODE 18 CODE 40 CODE 18 CODE 40 CODE 18 CODE 40 CODE 18 CODE 40 CODE 18 CODE 40 1 PRAHT073I2 15 PRAHT100I2 29 PRAHT182I2 43 PRAHT074C2 57 PRAHT135C2 2 PRAHT073I3 16 PRAHT100I3 30 PRAHT182I3 44 PRAHT074C3 58 PRAHT135C3 3 PRAHT073I4 17 PRAHT100I4 31 PRAHT182I4 45 PRAHT074C4 59 PRAHT135C4 4 PRAHT073I5 18 PRAHT100I5 32 PRAHT182I5 46 PRAHT074C5 60 PRAHT135C5 5 PRAHT073I6 19 PRAHT100I6 33 PRAHT182I6 47 PRAHT074C6 61 PRAHT135C6 6 PRAHT073I7 20 PRAHT100I7 34 PRAHT182I7 48 PRAHT074C7 62 PRAHT135C7 7 PRAHT073I8 21 PRAHT100I8 35 PRAHT182I8 49 PRAHT074C8 63 PRAHT135C8 8 PRAHT074I2 22 PRAHT135I2 36 PRAHT073C2 50 PRAHT100C2 64 PRAHT182C2 9 PRAHT074I3 23 PRAHT135I3 37 PRAHT073C3 51 PRAHT100C3 65 PRAHT182C3 10 PRAHT074I4 24 PRAHT135I4 38 PRAHT073C4 52 PRAHT100C4 66 PRAHT182C4 11 PRAHT074I5 25 PRAHT135I5 39 PRAHT073C5 53 PRAHT100C5 67 PRAHT182C5 12 PRAHT074I6 26 PRAHT135I6 40 PRAHT073C6 54 PRAHT100C6 68 PRAHT182C6 13 PRAHT074I7 27 PRAHT135I7 41 PRAHT073C7 55 PRAHT100C7 69 PRAHT182C7 14 PRAHT074I8 28 PRAHT135I8 42 PRAHT073C8 56 PRAHT100C8 70 PRAHT182C8 STANDARD ELECTRICAL SPECIFICATIONS POWER RESISTANCE ABSOLUTE RATIO ABSOLUTE RATIO RATING PER (2) (2) MODEL SIZE RANGE TOLERANCE TOLERANCE TCR TCR (1) RESISTOR % % ppm/C ppm/C W PRAHT 100 100 10 to 250K 0.010 0.1, 0.5, 1 0.05, 0.1 15 2 PRAHT 135 135 10 to 500K 0.0125 0.1, 0.5, 1 0.05, 0.1 15 2 PRAHT 182 182 10 to 2M 0.020 0.1, 0.5, 1 0.05, 0.1 15 2 Notes (1) At +215 C (2) At -40 C to +215 C Revision: 22-Jul-2019 Document Number: 53057 2 For technical questions, contact: sferthinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000