PTN
www.vishay.com
Vishay Dale Thin Film
Commercial Thin Film Chip Resistor,
Surface Mount Chip
FEATURES
Moisture resistant
High purity alumina substrate
Non-standard values available Available
Will pass +85 C, 85 % relative humidity and
Available
10 % rated power
100 % visual inspected per MIL-PRF-55342
Actual Size
1505
Non-inductive
Available
Very low noise and voltage coefficient (< -30 dB)
These chip resistors are available in both top side and
Laser-trimmed tolerances to 0.05 %
wraparound termination styles in a variety of sizes. They
Available
Wraparound resistance less than 10 m
incorporate self passivated, enhanced Tantalum Nitride
Epoxy bondable termination available
films, to give superior performance on moisture resistance,
Sulfur resistant (per ASTM B809-95 humid vapor test)
voltage coefficient, power handling and resistance stability.
Material categorization: for definitions of compliance
The terminations consist of an adhesion layer, a leach
please see www.vishay.com/doc?99912
resistant nickel barrier, and solder coating. This product
Note
will out-perform all requirements of characteristic E of
* This datasheet provides information about parts that are
MIL-PRF-55342.
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
CONSTRUCTION
Please see the information / tables in this datasheet for details.
T antalum Nitride
Resistive Film
Passivation
TYPICAL PERFORMANCE
Solder
Coating
ABSOLUTE
Nickel Barrier
TCR 10
High Purity
Alumina Substrate
TOL. 0.05
Adhesion Layer
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Tantalum nitride -
Resistance Range 1.0 to 3 M -
TCR: Absolute 10 ppm/C to 100 ppm/C -55 C to +125 C
Tolerance: Absolute 0.05 % to 5 % +25 C
Stability: Absolute R 0.03 % 2000 h at 70 C
Stability: Ratio --
Voltage Coefficient 0.1 ppm/V -
Working Voltage 75 V to 200 V -
Operating Temperature Range -55 C to +155 C -
Storage Temperature Range -55 C to +155 C -
Noise < -30 dB -
Shelf Life Stability: Absolute --
COMPONENT RATINGS
(1)
CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE ()
0402 50 75 1.5 to 51.1K
0502 100 75 1.5 to 65K
0505 150 75 10 to 130K
0603 150 75 1.5 to 130K
0705 200 100 1.0 to 310K
0805 200 100 1.0 to 310K
1005 250 100 1.5 to 360K
1010 500 150 1.0 to 600K
1206 400 200 1.5 to 1M
1505 400 150 1.25 to 1M
2208 750 150 2.0 to 1.75M
2010 800 200 1.0 to 2M
(2)
2512 2000 200 1.5 to 3M
Notes
(1)
0705 and 0805 are the same (only use 0805 when ordering)
(2)
Reference environmental tests table for short time overload test parameters.
Revision: 13-Oct-16 Document Number: 60026
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000PTN
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE L W T D E
0402 0.042 0.008 0.022 0.005 0.012 to 0.033 0.010 0.005 0.010 0.005
0502 0.055 0.006 0.025 0.005 0.012 to 0.033 0.010 0.005 0.015 0.005
0505 0.055 0.006 0.050 0.005 0.012 to 0.033 0.010 0.005 0.015 0.005
0603 0.064 0.006 0.032 0.005 0.020 max. 0.012 0.005 0.015 0.005
(1)
0705, 0805 0.080 0.006 0.050 0.005 0.015 to 0.033 0.016 0.008 0.015 0.005
1005 0.105 0.007 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005
1010 0.105 0.007 0.100 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005
1206 0.126 0.008 0.063 0.005 0.015 to 0.033 0.020 + 0.005/ - 0.010 0.020 + 0.005/ - 0.010
1505 0.155 0.007 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005
2010 0.209 0.009 0.098 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005
2208 0.230 0.007 0.075 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005
2512 0.259 0.009 0.124 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005
Note
(1)
0705 and 0805 are the same (only use 0805 when ordering)
ENVIRONMENTAL TESTS (Vishay Performance vs. MIL-PRF-55342 Requirements)
LIMITS MIL-PRF-55342 TYPICAL VISHAY
ENVIRONMENTAL TEST
CHARACTERISTIC E PERFORMANCE
Resistance Temperature Characteristic 25 ppm/C 15 ppm/C
Max. Ambient Temp. at Rated Wattage +70 C +70 C
Max. Ambient Temp. at Power Derating +150 C +150 C
Thermal Shock R 0.1 % 0.040 %
Low Temperature Operation R 0.1 % 0.001 %
(1)
Short Time Overload R 0.10 % 0.002 %
High Temperature Exposure R 0.1 % 0.04 %
Resistance to Soldering Heat R 0.2 % 0.008 %
Moisture Resistance R 0.2 % 0.004 %
Life +70 C at 1000 h R 0.50 % 0.02 %
Insulation Resistance 10 000 minimum > 100 000 M
Note
(1)
2512 short time overload test is based on 1 W power level below critical value of 20 k.
FILM LOAD LIFE STABILITY (at +125 C) DERATING CURVE
100
0.1 %
0.06 %
0.05 %
Maximum
80
0.04 %
Absolute
0.03 %
Change
0.02 %
60
0.01 %
0.006 %
40
0.005 %
0.004 %
0.003 %
20
0.002 %
0.001 % 0
0170 12555
200 400 600 800 1000 1200 1400 1600 1800 2000
Time in h at + 125 C
Ambient Temperature C
Revision: 13-Oct-16 Document Number: 60026
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Percent of Rated Power