PTN0603E4751BST1 Vishay

PTN www.vishay.com Vishay Dale Thin Film Commercial Thin Film Chip Resistor, Surface-Mount Chip FEATURES Moisture resistant High purity alumina substrate Non-standard values available Available Will pass +85 C, 85 % relative humidity and Available 10 % rated power 100 % visual inspected per MIL-PRF-55342 Actual Size 1505 Non-inductive Available Very low noise and voltage coefficient (< -30 dB) These chip resistors are available in both top side and Laser-trimmed tolerances to 0.05 % wraparound termination styles in a variety of sizes. They Available Wraparound resistance less than 10 m incorporate self passivated, enhanced Tantalum Nitride Epoxy bondable termination available films, to give superior performance on moisture resistance, voltage coefficient, power handling and resistance stability. Sulfur resistant (per ASTM B809-95 humid vapor test) The terminations consist of an adhesion layer, a leach Material categorization: for definitions of compliance resistant nickel barrier, and solder coating. This product please see www.vishay.com/doc 99912 will out-perform all requirements of characteristic E of Note MIL-PRF-55342. * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For CONSTRUCTION example, parts with lead (Pb) terminations are not RoHS-compliant. T antalum Nitride Please see the information / tables in this datasheet for details Resistive Film Passivation TYPICAL PERFORMANCE Solder Coating ABSOLUTE Nickel Barrier TCR 10 High Purity Alumina Substrate TOL. 0.05 Adhesion Layer STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 1.0 to 3 M - TCR: Absolute 10 ppm/C to 100 ppm/C -55 C to +125 C Tolerance: Absolute 0.05 % to 5 % +25 C Stability: Absolute R 0.03 % 2000 h at 70 C Stability: Ratio -- Voltage Coefficient 0.1 ppm/V - Working Voltage 75 V to 200 V - Operating Temperature Range -55 C to +155 C - Storage Temperature Range -55 C to +155 C - Noise < -30 dB - Shelf Life Stability: Absolute -- COMPONENT RATINGS (1) CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0402 50 75 1.5 to 51.1K 0502 100 75 1.5 to 65K 0505 150 75 10 to 130K 0603 150 75 1.5 to 130K 0705 200 100 1.0 to 310K 0805 200 100 1.0 to 310K 1005 250 100 1.5 to 360K 1010 500 150 1.0 to 600K 1206 400 200 1.5 to 1M 1505 400 150 1.25 to 1M 2208 750 150 2.0 to 1.75M 2010 800 200 1.0 to 2M (2) 2512 2000 200 1.5 to 3M Notes (1) 0705 and 0805 are the same (only use 0805 when ordering) (2) Reference environmental tests table for short time overload test parameters Revision: 08-Jan-2020 Document Number: 60026 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 PTN www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D W T E L CASE SIZE L W T D E 0402 0.042 0.008 0.022 0.005 0.012 to 0.033 0.010 0.005 0.010 0.005 0502 0.055 0.006 0.025 0.005 0.012 to 0.033 0.010 0.005 0.015 0.005 0505 0.055 0.006 0.050 0.005 0.012 to 0.033 0.010 0.005 0.015 0.005 0603 0.064 0.006 0.032 0.005 0.020 max. 0.012 0.005 0.015 0.005 (1) 0705, 0805 0.080 0.006 0.050 0.005 0.015 to 0.033 0.016 0.008 0.015 0.005 1005 0.105 0.007 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 1010 0.105 0.007 0.100 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 1206 0.126 0.008 0.063 0.005 0.015 to 0.033 0.020 + 0.005/ - 0.010 0.020 + 0.005/ - 0.010 1505 0.155 0.007 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 2010 0.209 0.009 0.098 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 2208 0.230 0.007 0.075 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 2512 0.259 0.009 0.124 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) ENVIRONMENTAL TESTS (Vishay Performance vs. MIL-PRF-55342 Requirements) LIMITS MIL-PRF-55342 TYPICAL VISHAY ENVIRONMENTAL TEST CHARACTERISTIC E PERFORMANCE Resistance Temperature Characteristic 25 ppm/C 15 ppm/C Max. Ambient Temp. at Rated Wattage +70 C +70 C Max. Ambient Temp. at Power Derating +150 C +150 C Thermal Shock R 0.1 % 0.040 % Low Temperature Operation R 0.1 % 0.001 % (1) Short Time Overload R 0.10 % 0.002 % High Temperature Exposure R 0.1 % 0.04 % Resistance to Soldering Heat R 0.2 % 0.008 % Moisture Resistance R 0.2 % 0.004 % Life +70 C at 1000 h R 0.50 % 0.02 % Insulation Resistance 10 000 minimum > 100 000 M Note (1) 2512 short time overload test is based on 1 W power level below critical value of 20 k FILM LOAD LIFE STABILITY (at +125 C) DERATING CURVE 100 0.1 % 0.06 % 0.05 % Maximum 80 0.04 % Absolute 0.03 % Change 0.02 % 60 0.01 % 0.006 % 40 0.005 % 0.004 % 0.003 % 20 0.002 % 0.001 % 0 0170 12555 200 400 600 800 1000 1200 1400 1800 1600 2000 Time in h at + 125 C Ambient Temperature C Revision: 08-Jan-2020 Document Number: 60026 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Percent of Rated Power