PTS Series - Pt-Sensors Vishay Beyschlag Platinum SMD Flat Chip Temperature Sensor FEATURES Standardized characteristics according to IEC 60751 Advanced thin film technology Short reaction times down to t 2 s (in air) 0.9 Outstanding stability of temperature characteristic Standard SMD sizes PTS SMD Flat Chip Temperature sensors are the perfect Supports lead (Pb)-free soldering choice for temperature control of electronics operating under Compliant to RoHS Directive 2002/95/EC varying environmental conditions. The highly controlled platinum thin film manufacturing process guarantees an APPLICATIONS outstanding stability of temperature characteristics which ensures reliable operation even under harsh conditions. Temperature measurement in Typical applications include automotive, aviation and Automotive electronics industrial electronics. Aviation electronics Industrial electronics TECHNICAL SPECIFICATIONS DESCRIPTION PTS 0603 PTS 0805 PTS 1206 Resistance values R at 0 C 100 100 , 500 100 , 500 , 1000 0 Temperature coefficient (0 C ... + 100 C) + 3850 ppm/K Tolerance classes F0.3, F0.6 Operating temperature range - 55 C to + 155 C Long term stability R /R 0 0 < 0.04 % R change after 1000 h at + 155 C 0 Insulation resistance > 10 M 100 0.1 mA to 0.50 mA 0.1 mA to 1.0 mA 0.1 mA to 1.0 mA Measurement current 500 - 0.1 mA to 0.40 mA 0.1 mA to 0.40 mA (2) I (DC) meas. 1000 - - 0.1 mA to 0.25 mA Still air (1) Self-heating 0.9 K/mW 0.8 K/mW 0.7 K/mW (v = 0 m/s) t 0.1 s t 0.2 s t 0.3 s 0.5 0.5 0.5 Flowing water (v = 0.4 m/s) t 0.2 s t 0.3 s t 0.4 s 0.9 0.9 0.9 (1) Thermal response time t 1.0 s t 1.5 s t 2.0 s 0.5 0.5 0.5 Flowing air (v = 3.0 m/s) t 2.0 s t 3.0 s t 5.0 s 0.9 0.9 0.9 Notes (1) Valid for sensor element only (2) Indicated measurement currents can be applied continuously with self-heating effect of less then 0.1 C www.vishay.com For technical questions, contact: nlr vishay.com Document Number: 28762 8 Revision: 06-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 PTS Series - Pt-Sensors Platinum SMD Flat Chip Vishay Beyschlag Temperature Sensor DIMENSIONS in millimeters T 1 W W T H T 2 L DIMENSIONS - PTS sensor types, mass and relevant physical dimensions MASS TYPE H L W W T T T 1 2 (mg) PTS 0603 0.45 + 0.1/- 0.05 1.55 0.05 0.85 0.1 > 75 % of W 0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2 1.9 PTS 0805 0.45 + 0.1/- 0.05 2.0 0.1 1.25 0.15 > 75 % of W 0.4 + 0.1/- 0.2 0.4 + 0.1/- 0.2 4.6 PTS 1206 0.55 0.1 3.2 + 0.1/- 0.2 1.6 0.15 > 75 % of W 0.5 0.25 0.5 0.25 9.2 PRODUCTION Production is strictly controlled and follows an extensive set All products comply with the CEFIC-EECA-EICTA list of legal of instructions established for reproducibility. A restrictions on hazardous substances. homogeneous film of platinum is deposited on a high grade This includes full compatibility with the following directives: ceramic body (96 % AI O ). The sensor-elements are 2 3 2000/53/EC End of Vehicle life Directive (ELV) covered by a protective coating designed for electrical, mechanical and climatic protection. The terminations receive 2000/53/EC Annex II to End of Vehicle Life Directive a final pure tin on nickel plating. (ELV II) 2002/95/EC Restriction of the use of Hazardous QUALITY Substances Directive (RoHS) The result of the determined production is verified by an 2002/96/EC Waste Electrical and Electronic Equipment extensive testing procedure performed on 100 % of the Directive (WEEE) individual sensors. Only accepted products are laid directly into the paper tape in accordance with IEC 60286-3. APPROVALS The Pt-sensors are tested in accordance with IEC 60751 STORAGE and IEC 60068 series. Solderability is specified for 2 years after production or re-qualification. The permitted storage time is 2 years. ASSEMBLY The Pt-sensors are suitable for processing on automatic SMD assembly systems. They are suitable for automatic soldering using wave, reflow or vapour phase. The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. The Pt-sensors are RoHS compliant, the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. The immunity of the plating against tin whisker growth has been proven under extensive testing. Document Number: 28762 For technical questions, contact: nlr vishay.com www.vishay.com Revision: 06-May-11 9 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000