RCA06031K00FKEA Vishay

333 3 RCA e3 www.vishay.com Vishay Draloric Automotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors FEATURES Superior resistance against sulfur containing atmosphere, according to ASTM B809-95 Stability at different environmental conditions R/R 1 % (1000 h rated power at 70 C) AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 LINKS TO ADDITIONAL RESOURCES APPLICATIONS Automotive 3D Models ADAS The sulfur resistant, thick film chip resistors series is the Industrial perfect choice for most fields of harsh environment Commercial electronics operation, where reliability and stability are of major concern. Typical applications include automotive, ADAS, industrial, and commercial applications whic h operate in harsh environment. TECHNICAL SPECIFICATIONS RCA0402 RCA0603 RCA0805 RCA1206 RCA1210 RCA1218 RCA2010 RCA2512 DESCRIPTION e3 e3 e3 e3 e3 e3 e3 e3 Imperial size 0402 0603 0805 1206 1210 1218 2010 2512 Metric size code RR1005M RR1608M RR2012M RR3216M RR3225M RR3246M RR5025M RR6332M 1 to 2.2 M 1 to 10 M Resistance range 1 to 10 M jumper (0 ) jumper (0 ) jumper (0 ) Resistance tolerance 5 % 1 % 0.5 % Temperature coefficient 200 ppm/K 100 ppm/K 50 ppm/K (1) Rated dissipation, P 0.063 W 0.10 W 0.125 W 0.25 W 0.5 W 1.0 W 0.75 W 1.0 W 70 Operating voltage, 50 V 75 V 150 V 200 V 200 V 200 V 400 V 500 V U AC /DC max. RMS Permissible film temperature, 155 C (1) F max. Operating temperature range -55 C to +155 C Maximum resistance change at P for resistance range, 70 R/R after: 1000 h 1.0 % Permissible voltage against ambient (insulation): 1 min, U 75 V 100 V 200 V 300 V 300 V 300 V 300 V 300 V ins -9 Failure rate: FIT 0.1 x 10 /h observed Notes Marking: see document Surface Mount Resistor Marking (www.vishay.com/doc 20020) (1) Please refer to APPLICATION INFORMATION below APPLICATION INFORMATION When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Revision: 23-Apr-2021 Document Number: 20037 1 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D RCA e3 www.vishay.com Vishay Draloric TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES 200 ppm/K 5 % 1.0 to 10 M E24 200 ppm/K 1 % 1.0 to 9.76 E24 E96 100 ppm/K 1 % 10 to 10 M E24 E96 RCA0402 e3 100 ppm/K 0.5 % 10 to 1.0 M E24 E96 50 ppm/K 0.5 % 1 % 100 to 1.0 M E24 E96 Jumper, I = 1.5 A 20 m 0 - max. 200 ppm/K 5 % 1.0 to 10 M E24 100 ppm/K 1 % 1.0 to 10 M E24 E96 RCA0603 e3 100 ppm/K 0.5 % 10 to 10 M E24 E96 50 ppm/K 0.5 % 1 % 100 to 10 M E24 E96 Jumper, I = 2.0 A 20 m 0 - max. 200 ppm/K 5 % 1.0 to 10 M E24 100 ppm/K 1 % 1.0 to 10 M E24 E96 RCA0805 e3 100 ppm/K 0.5 % 10 to 10 M E24 E96 50 ppm/K 0.5 % 1 % 100 to 10 M E24 E96 Jumper, I = 2.5 A 20 m 0 - max. 200 ppm/K 5 % 1.0 to 10 M E24 100 ppm/K 1 % 1.0 to 10 M E24 E96 RCA1206 e3 100 ppm/K 0.5 % 10 to 10 M E24 E96 50 ppm/K 0.5 % 1 % 100 to 10 M E24 E96 Jumper, I = 3.5 A 20 m 0 - max. 200 ppm/K 5 % 1.0 to 10 M E24 100 ppm/K 1 % 1.0 to 10 M E24 E96 RCA1210 e3 100 ppm/K 0.5 % 10 to 1.0 M E24 E96 50 ppm/K 0.5 % 1 % 100 to 1.0 M E24 E96 Jumper, I = 5.0 A 20 m 0 - max. 200 ppm/K 5 % 1.0 to 2.2 M E24 100 ppm/K 1 % 1.0 to 2.2 M E24 E96 RCA1218 e3 100 ppm/K 0.5 % 100 to 2.2 M E24 E96 50 ppm/K 0.5 % 1 % 100 to 2.2 M E24 E96 Jumper, I = 7.0 A 20 m 0 - max. 200 ppm/K 5 % 1.0 to 10 M E24 100 ppm/K 1 % 1.0 to 10 M E24 E96 RCA2010 e3 100 ppm/K 0.5 % 10 to 10 M E24 E96 50 ppm/K 0.5 % 1 % 100 to 10 M E24 E96 Jumper, I = 6.0 A 20 m 0 - max. 200 ppm/K 5 % 1.0 to 10 M E24 100 ppm/K 1 % 1.0 to 10 M E24 E96 RCA2512 e3 100 ppm/K 0.5 % 10 to 10 M E24 E96 50 ppm/K 0.5 % 1 % 100 to 10 M E24 E96 Jumper, I = 7.0 A 20 m 0 - max. Note The temperature coefficient of resistance (TCR) is not specified for 0 jumpers Revision: 23-Apr-2021 Document Number: 20037 2 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000