RCP www.vishay.com Vishay Dale Thick Film Chip Resistors, Industrial, High Power, Aluminum Nitride Substrate FEATURES Thick film resistive element on an aluminum Available nitride (AlN) substrates Very high thermal conductivity in a small package size Termination: tin / lead wraparound termination Available over nickel barrier. Also available with Aluminum nitride lead (Pb)-free wraparound terminations over 3 x more power - same size Capability to develop specific reliability LINKS TO ADDITIONAL RESOURCES programs designed to customer requirements Operating temperature range: -65 C to +155 C S-Parameters High frequency performance to 6 GHz Material categorization: for definitions of compliance MATERIAL SPECIFICATIONS please see www.vishay.com/doc 99912 Resistive element Ruthenium oxide Note Encapsulation Epoxy * This datasheet provides information about parts that are Substrate Aluminum nitride RoHS-compliant and / or parts that are non RoHS-compliant. For Termination Solder-coated nickel barrier example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details Solder finish Pure tin or tin / lead solder alloy STANDARD ELECTRICAL SPECIFICATIONS (1) (1) POWER RATING POWER RATING MAXIMUM (Standard (Active RESISTANCE TEMPERATURE GLOBAL CASE WORKING TOLERANCE Board Mount) Temperature RANGE COEFFICIENT MODEL SIZE VOLTAGE % P Control) ppm/C 25 C V W W RCP0505 0505 1.4 5.0 P x R 10 to 2K 1, 2, 5 150 RCP0603 0603 1.5 3.9 P x R 10 to 2K 1, 2, 5 150 RCP1206 1206 2.4 11 P x R 10 to 2K 1, 2, 5 150 RCP2512 2512 3.5 22 P x R 10 to 2K 1, 2, 5 150 Notes Consult factory for availability of additional case sizes (1) The power rating depends on the maximum temperature of the resistive element. The temperature of the resistive element and adjacent materials will rise due to the power dissipation of the resistor. The majority of this heat/energy is dissipated by conduction through the substrate, terminations, solder joints, and printed circuit board. The maximum power rating in a particular application only applies if the temperature of the resistive element is maintained at or below 155 C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RCP1206W100RGWB (preferred part numbering format) R C P 1206 W 1 0 0R G W B GLOBAL RESISTANCE TOLERANCE BOTTOM TERM. PACKAGING CODE SPECIAL MODEL VALUE CODE RCP0505 W = wide R = F = 1 % TP = tin / lead, T/R (full reel) Blank = standard RCP0603 B = traditional K = k G = 2 % S3 = tin / lead, T/R (1000 pieces) (dash number) RCP1206 10R0 = 10 J = 5 % WB = tin / lead, tray (up to 3 digits) RCP2512 1K30 = 1.3 k S2 = tin / lead, T/R (500 pieces) from 1 to 999 as S6 = tin / lead, T/R (300 pieces) applicable EA = lead (Pb)-free, T/R (full reel) EB = lead (Pb)-free, T/R (1000 pieces) ET = lead (Pb)-free, tray EC = lead (Pb)-free, T/R (500 pieces) ED = lead (Pb)-free, T/R (300 pieces) Note For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc 31543) Revision: 10-Aug-2021 Document Number: 31098 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RCP www.vishay.com Vishay Dale PERFORMANCE TEST RESULTS TEST CONDITIONS OF TEST (TYPICAL TEST LOTS) Resistance to soldering heat 2 cycles > 183 C for 90 s to 120 s 0.20 % Resistance temperature characteristic -55 C to +125 C 120 ppm Low temperature operation -65 C at rated voltage 0.02 % RCP0505 3.1 W applied for 5 s RCP0603 4.4 W applied for 5 s Short time overload 0.10 % RCP1206 4.7 W applied for 5 s RCP2512 7.7 W applied for 5 s High temperature exposure +150 C for 100 h 0.10 % Moisture resistance 240 h at 80 % RH 0.15 % Life 1000 h at +70 C 0.10 % Solderability J-STD-202, test B 95 % coverage Per MIL-PRF-55342: RCP0505 1 kg force applied RCP0603 2 kg force applied No evidence of mechanical damage Solder mounting integrity RCP1206 2 kg force applied RCP2512 3 kg force applied DIMENSIONS in inches (millimeters) D D B C C A A E E WIDE BOTTOM TERMINAL (W) TRADITIONAL TERMINAL (B) GLOBAL A B C D E MODEL (LENGTH) (WIDTH) (HEIGHT) (TOP TERM) (BOTTOM TERM) 0.055 0.005 0.050 0.005 0.020 0.005 0.010 0.005 0.020 0.005 RCP0505W (1.40 0.13) (1.27 0.13) (0.51 0.13) (0.25 0.13) (0.51 0.13) 0.055 0.005 0.050 0.005 0.020 0.005 0.010 0.005 0.015 0.005 RCP0505B (1.40 0.13) (1.27 0.13) (0.51 0.13) (0.25 0.13) (0.38 0.13) 0.063 0.005 0.032 0.005 0.018 0.005 0.012 0.005 0.023 0.005 RCP0603W (1.60 0.13) (0.81 0.13) (0.46 0.13) (0.30 0.13) (0.58 0.13) 0.063 0.005 0.032 0.005 0.018 0.005 0.012 0.005 0.015 0.005 RCP0603B (1.60 0.13) (0.81 0.13) (0.46 0.13) (0.30 0.13) (0.38 0.13) 0.122 0.005 0.060 0.005 0.020 0.005 0.015 0.005 0.048 0.005 RCP1206W (3.10 0.13) (1.52 0.13) (0.51 0.13) (0.38 0.13) (1.22 0.13) 0.122 0.005 0.060 0.005 0.020 0.005 0.015 0.005 0.015 0.005 RCP1206B (3.10 0.13) (1.52 0.13) (0.51 0.13) (0.38 0.13) (0.38 0.13) 0.250 0.005 0.124 0.005 0.020 0.005 0.020 0.005 0.113 0.005 RCP2512W (6.35 0.13) (3.15 0.13) (0.51 0.13) (0.51 0.13) (2.87 0.13) 0.250 0.005 0.124 0.005 0.020 0.005 0.020 0.005 0.020 0.005 RCP2512B (6.35 0.13) (3.15 0.13) (0.51 0.13) (0.51 0.13) (0.51 0.13) Revision: 10-Aug-2021 Document Number: 31098 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000