RCWP www.vishay.com Vishay Dale Thick Film Chip Resistors, Industrial FEATURES Same materials and construction as MIL-PRF-55342 chip resistors Available Construction is sulfur impervious against a high sulfur environment (ASTM B 809-95 test method) Termination: Tin/lead wraparound termination over nickel barrier. Also available with Available lead (Pb)-free wraparound terminations Capability to develop specific reliability programs designed to customer requirements MECHANICAL SPECIFICATIONS Size, value, packaging and materials can be customized Resistive element Ruthenium oxide for special customer requirements Encapsulation Epoxy Operating temperature range: -55 C to +155 C For zero ohm jumpers, see Vishay Dales RCWP Jumper Substrate 96 % alumina datasheet (www.vishay.com/doc 31017) Termination Solder-coated nickel barrier Material categorization: For definitions of compliance Solder finish Pure tin or tin/lead solder alloy please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS MAXIMUM (1) POWER RATING RESISTANCE TEMPERATURE GLOBAL HISTORICAL CASE WORKING TOLERANCE P RANGE COEFFICIENT 70 C (2) MODEL MODEL SIZE VOLTAGE % W ppm/C V 10 to 46 5, 10 300 RCWP0201 RCWP-0201 0201 0.05 30 47 to 1M 1, 2, 5, 10 100, 200, 300 1 to 9.1 2, 5, 10 300 RCWP0502 RCWP-0502 0502 0.05 40 10 to 22M 1, 2, 5, 10 100, 200, 300 1 to 9.1 2, 5, 10 300 RCWP0302 RCWP-0302 0302 0.04 15 10 to 22M 1, 2, 5, 10 100, 200, 300 1 to 9.1 2, 5, 10 300 RCWP0402 RCWP-0402 0402 0.05 30 10 to 22M 1, 2, 5, 10 100, 200, 300 1 to 5.6 2, 5, 10 300 RCWP0603 RCWP-0603 0603 0.10 50 5.62 to 22M 1, 2, 5, 10 100, 200, 300 1 to 9.1 2, 5, 10 300 RCWP0540 RCWP-540 0504 0.08 40 10 to 22M 1, 2, 5, 10 100, 200, 300 1 to 9.1 2, 5, 10 300 RCWP0550 RCWP-550 0505 0.125 50 10 to 22M 1, 2, 5, 10 100, 200, 300 1 to 5.6 2, 5, 10 300 (3) RCWP0575 RCWP-575 0705 0.15 70 5.62 to 22M 1, 2, 5, 10 100, 200, 300 1 to 5.6 2, 5, 10 300 RCWP5100 RCWP-5100 1005 0.20 100 5.62 to 22M 1, 2, 5, 10 100, 200, 300 1 to 5.6 2, 5, 10 300 RCWP1206 RCWP-1206 1206 0.25 100 5.62 to 22M 1, 2, 5, 10 100, 200, 300 1 to 5.6 2, 5, 10 300 RCWP5150 RCWP-5150 1505 0.35 125 5.62 to 22M 1, 2, 5, 10 100, 200, 300 1 to 5.6 2, 5, 10 300 RCWP1100 RCWP-1100 1010 0.50 100 5.62 to 22M 1, 2, 5, 10 100, 200, 300 1 to 5.6 2, 5, 10 300 RCWP7225 RCWP-7225 2208 0.60 200 5.62 to 22M 1, 2, 5, 10 100, 200, 300 1 to 5.6 2, 5, 10 300 RCWP2010 RCWP-2010 2010 0.80 200 5.62 to 22M 1, 2, 5, 10 100, 200, 300 1 to 5.6 2, 5, 10 300 RCWP2512 RCWP-2512 2512 1.0 200 5.62 to 22M 1, 2, 5, 10 100, 200, 300 Notes Consult factory for extended resistance range. (1) Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material. (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (3) MIL case size 0705 and EIA case size 0805 are dimensionally the same. Revision: 21-Feb-14 Document Number: 31011 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RCWP www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RCWP510010K0GMWB (preferred part numbering format) R C W P 510 010 K0 G M W B GLOBAL RESISTANCE TOLERANCE TEMPERATURE (1) PACKAGING CODE SPECIAL MODEL VALUE CODE COEFFICIENT (See Standard R = F = 1 % K = 100 ppm TP = Tin/lead, T/R, plastic tape Blank = Standard Electrical K = k G = 2 % N = 200 ppm (full reel all sizes except 0201) (Dash number) Specifications M = M J = 5 % M = 300 ppm S3 = Tin/lead, T/R, plastic tape (Up to 2 digits) table) 10R0 = 10 K = 10 % S = Special, (1000 pieces all sizes except 0201) From 1 to 99 as 1K30 = 1.3 k Z = 0 Jumper 0 Jumper WB = Tin/lead, waffle tray applicable 1M00 = 1.0 M S2 = Tin/lead, T/R, plastic tape 99 = 0 Jumper 0000 = 0 Jumper (500 pieces all sizes except 0201) S6 = Tin/lead, T/R, plastic tape (300 pieces all sizes except 0201) UA = Tin/lead, T/R, paper tape (full reel 0201 only) UD = Tin/lead, T/R, paper tape (1000 pieces 0201 only) UC = Tin/lead, T/R, paper tape (500 pieces 0201 only) UB = Tin/lead, T/R, paper tape (300 pieces 0201 only) EA = Lead (Pb)-free, T/R (full) EB = Lead (Pb)-free, T/R (1000 pieces) ET = Lead (Pb)-free, waffle tray EC = Lead (Pb)-free, T/R (500 pieces) ED = Lead (Pb)-free, T/R (300 pieces) Historical Part Number: RCWP-5100103G (will continue to be accepted) RCWP-5100 103 G T03 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING CODE Notes For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc 31543). (1) Tape and reel packaging with plastic tape standard for all case sizes except 0201. For the 0201 case size, the product is only offered in tape and reel packaging with paper tape. DERATING CURVE 120 100 80 60 40 20 0 - 55 - 25 0 255 0 75 100 125 150 175 70 Ambient Temperature in C Revision: 21-Feb-14 Document Number: 31011 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Rated Power in %