RH, NH www.vishay.com Vishay Dale Wirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount FEATURES Molded construction for total environmental protection Complete welded construction Available Meets applicable requirements of MIL-PRF-18546 Available in non-inductive styles (type NH) with Ayrton-Perry winding for lowest reactive components Mounts on chassis to utilize heat-sink effect Available Excellent stability in operation (< 1 % change in resistance) MIL-PRF-18546 qualified, type RE resistors can Available be found at: www.vishay.com/doc 30282 Material categorization: For definitions of compliance please see Available www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RESISTANCE RESISTANCE RESISTANCE POWER WEIGHT GLOBAL HISTORICAL RANGE RANGE RANGE RANGE RATING (typical) MODEL MODEL P W g 0.05 %, 0.1 % 0.25 % 0.5 % 1 %, 3 %, 5 % 25 C RH005 RH-5 7.5 0.5 to 6.75K 0.1 to 8.6K 0.05 to 8.6K 0.02 to 24.5K 3 NH005 NH-5 7.5 0.5 to 2.32K 0.1 to 3.27K 0.05 to 3.27K 0.05 to 12.75K 3 RH010 RH-10 12.5 0.5 to 12.7K 0.1 to 16.69K 0.05 to 16.69K 0.01 to 47.1K 5 NH010 NH-10 12.5 0.5 to 4.45K 0.1 to 5.54K 0.05 to 5.54K 0.05 to 23.5K 5 RH025 RH-25 25 0.5 to 25.7K 0.1 to 32.99K 0.05 to 32.99K 0.01 to 95.2K 12 NH025 NH-25 25 0.5 to 9.09K 0.1 to 12.8K 0.05 to 12.8K 0.05 to 47.6K 12 RH050 RH-50 50 0.5 to 73.4K 0.1 to 96K 0.05 to 96K 0.01 to 273K 28 NH050 NH-50 50 0.5 to 26K 0.1 to 36.7K 0.05 to 36.7K 0.05 to 136K 28 RH100 RH-100 100 0.5 to 90K 0.1 to 90K 0.05 to 90K 0.05 to 90K 353 NH100 NH-100 100 0.5 to 37.5K 0.1 to 37.5K 0.05 to 37.5K 0.05 to 37.5K 353 RH250 RH-250 250 0.5 to 116K 0.1 to 116K 0.05 to 116K 0.05 to 116K 637 NH250 NH-250 250 0.5 to 48.5K 0.1 to 48.5K 0.05 to 48.5K 0.05 to 48.5K 637 Note RH005 and NH005 printed with 5 W power rating. RH010 and NH010 printed with 10 W power rating. New construction allows these resistors to be rated at higher wattage but will only be printed with the higher wattage upon customer request TECHNICAL SPECIFICATIONS PARAMETER UNIT RH RESISTOR CHARACTERISTICS Temperature Coefficient ppm/C 20 for 10 and above 50 for 1 to 9.9 , 100 for 0.1 to 0.99 1/2 Maximum Working Voltage V (P x R) Insulation Resistance 10 000 M minimum dry, 1000 M minimum after moisture test Solderability - Meets requirements of ANSI J-STD-002 Operating Temperature Range C - 55 to + 250 GLOBAL PART NUMBER INFORMATION Global Part Numbering example: RH0054R125FC02 R H 00 54 R 1 2 5F C 0 2 GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING SPECIAL RH005 R = Decimal A = 0.05 % E02 = Lead (Pb)-free, card pack (RH005 - RH050) (Dash Number) (See Standard K = Thousand B = 0.1 % E01 = Lead (Pb)-free, skin pack (RH100 and RH250) (up to 3 digits) Electrical 15R00 = 15 C = 0.25 % From 1 to 999 C02 = Tin/lead, card pack (RH005 - RH050) Specifications 10K00 = 10 k D = 0.5 % as applicable J01 = Tin/lead, skin pack (RH100 and RH250) Global Model F = 1.0 % column for H = 3.0 % options) J = 5.0 % Historical Part Numbering example: RH-5 4.125 1 % C02 RH-5 4.125 1 % C02 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Revision: 23-May-13 Document Number: 30201 1 For technical questions, contact: ww2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RH, NH www.vishay.com Vishay Dale DIMENSIONS in inches millimeters D RH005, 010, 025, 050 C F M NH005, 010, 025, 050 A E N G J B P H L K DIMENSIONS in inches millimeters GLOBAL MODEL AB C D E F G H J K L M N P 0.444 0.490 0.600 1.125 0.334 0.646 0.320 0.065 0.133 0.078 0.093 0.078 0.050 0.266 RH005 0.005 0.005 0.030 0.062 0.015 0.015 0.015 0.010 0.010 0.010 0.005 0.015 0.005 0.062 NH005 11.28 12.45 15.24 28.58 8.48 16.41 8.13 1.65 3.38 1.98 2.36 1.98 1.27 6.76 0.127 0.127 0.787 1.57 0.381 0.381 0.381 0.254 0.254 0.254 0.127 0.381 0.127 1.57 0.800 0.390 0.075 0.165 0.093 0.094 0.102 0.085 0.312 0.420 0.562 0.625 0.750 1.375 RH010 0.005 0.005 0.031 0.062 0.015 0.015 0.015 0.010 0.010 0.010 0.005 0.015 0.005 0.062 10.67 NH010 14.27 15.88 19.05 34.93 20.32 9.91 1.91 4.19 2.36 2.39 2.59 2.16 7.92 0.127 0.127 0.787 1.57 0.381 0.381 0.381 0.254 0.254 0.254 0.127 0.381 0.127 1.57 0.719 0.781 1.062 1.938 0.550 1.080 0.546 0.075 0.231 0.172 0.125 0.115 0.085 0.438 RH025 0.005 0.005 0.031 0.062 0.015 0.015 0.015 0.010 0.010 0.010 0.005 0.015 0.005 0.062 NH025 18.26 19.84 26.97 49.23 13.97 27.43 13.87 1.91 5.87 4.37 3.18 2.92 2.16 11.13 0.127 0.127 0.787 1.57 0.381 0.381 0.381 0.254 0.254 0.254 0.127 0.381 0.127 1.57 1.562 1.968 2.781 0.630 1.140 0.610 0.088 0.260 0.196 0.125 0.107 0.085 0.438 0.844 RH050 0.005 0.005 0.031 0.062 0.015 0.015 0.015 0.010 0.010 0.010 0.005 0.015 0.005 0.062 NH050 39.67 21.44 49.99 70.64 16.00 28.96 15.49 2.24 6.60 4.98 3.18 2.72 2.16 11.13 0.127 0.127 0.787 1.57 0.381 0.381 0.381 0.254 0.254 0.254 0.127 0.381 0.127 1.57 DIMENSIONS in inches millimeters RH100, NH100 0.188 0.010 Nickel plated 4.78 0.254 brass nut 3.50 0.031 1.812 0.031 Dia. typ. stainless steel stud 88.90 0.787 46.02 0.787 1.125 0.031 28.58 0.787 2.812 0.031 1.75 0.031 71.42 0.787 44.45 0.787 2.25 0.010 57.15 0.254 0.375 0.031 9.52 0.787 0.989 0.031 0.188 0.031 12 - 24 0.770 0.015 25.12 0.787 4.78 0.787 UNC-2A 19.56 0.381 2.75 0.010 typ. Thd. typ. 69.85 0.254 5.478 0.093 139.14 2.36 RH250, NH250 0.188 0.010 4.78 0.254 1/4 - 20 Dia. typ. Nickel plated 2.125 0.031 UNC-2A thd. typ. brass nut 53.98 0.787 4.50 0.031 stainless steel stud 114.30 0.787 1.25 0.062 31.75 1.575 3.0 0.031 2.188 0.031 76.20 0.787 55.58 0.787 2.50 0.010 63.50 0.254 0.875 0.010 0.250 0.031 0.955 0.015 1.25 0.062 22.23 0.254 6.35 0.787 24.26 0.381 0.312 0.031 31.75 1.575 3.0 0.010 typ. 7.92 0.787 76.20 0.254 3.875 0.010 98.42 0.254 7.0 0.093 177.80 2.36 Revision: 23-May-13 Document Number: 30201 2 For technical questions, contact: ww2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000