ERL (Military RLR) www.vishay.com Vishay Dale Metal Film Resistors, Axial, Military / Established Reliability, MIL-PRF-39017 Qualified, Type RLR FEATURES Meets requirements of MIL-PRF-39017 Failure rate: Verified failure rate (contact factory for current level) Epoxy coated construction provides superior moisture protection Traceability of materials and processing Monthly lot acceptance testing Very low noise (-40 dB) Extensive stocking program at distributors and factory in 1 % and 2 % tolerances Vishay Dale has complete capability to develop specific reliability programs designed to customer requirements STANDARD ELECTRICAL SPECIFICATIONS POWER MAXIMUM VISHAY MIL RESISTANCE TEMPERATURE LIFE MIL-PRF-39017 RATING TOLERANCE WORKING (1) DALE SPEC. RANGE COEFFICIENT FAILURE (4) STYLE 70 C % VOLTAGE (2) MODEL SHEET ppm/C RATE W V ERL05, 4.7 to 100K M, P, R, S RLR05 05 0.125 1, 2 100 200 (3) ERL05..19 101K to 1M M, P, R 1 to 9.76 M ERL07, RLR07 01 0.25 10 to 3.01M 1, 2 100 250 M, P, R, S (3) ERL07..23 3.02M to 10M M, P, R ERL20, RLR20 02 0.50 4.3 to 3.01M 1, 2 100 350 M, P, R, S (3) ERL20..11 ERL32, RLR32 03 1.0 1 to 2.7M 1, 2 100 500 M, P, R (3) ERL32..1 Notes (1) Extended resistance range: DSCC has created a series of drawings intended to support extended resistance ranges left otherwise void by the discontinuation of MIL-R-39008 RCR carbon composition resistors. Vishay Dale is listed as a resource on these drawings as follows: MAXIMUM DSCC POWER RATING RESISTANCE TEMPERATURE VISHAY DALE TOLERANCE WORKING DRAWING P RANGE COEFFICIENT 70 C MODEL % VOLTAGE NUMBER W ppm/C (4) V (3) 98020 ERL05..36, ERL05..37 0.125 1.1M to 22M 2, 5, 10 350 200 (3) 99011 ERL07..100, ERL07..101 0.25 11M to 22M 2, 5, 10 350 250 (3) 98021 ERL20..36, ERL20..37 0.50 3.3M to 22M 2, 5, 10 350 350 (3) 98022 ERL32..36, ERL32..37 1.0 3M to 22M 2, 5, 10 350 350 10 to 2.7M 100 (3) 97004 ERL62..1, ERL62..2 2.0 1, 2, 5, 10 500 3M to 22M 350 Low inductance: DSCC has created a drawing intended to support a resistor which exhibits low inductance over a frequency range of 1 MHz to 30 MHz. Vishay Dale is listed as a resource on these drawings as follows: POWER MAXIMUM DSCC RESISTANCE MAXIMUM TEMPERATURE VISHAY DALE RATING TOLERANCE WORKING DRAWING RANGE INDUCTANCE COEFFICIENT MODEL P % VOLTAGE 70 C NUMBER nH ppm/C (4) W V 1 to 10 10 96002 ERL07..62 0.25 1, 2 100 250 11 to 49.9 8 These drawings can be viewed at: ERL (Military RLR) www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RLR07C3001FRR36 (preferred part numbering format) R LR70 C3F001 RR36 RESISTANCE TOLERANCE FAILURE MIL STYLE LEAD MATERIAL PACKAGING SPECIAL VALUE CODE RATE RLR05 C = solderable / 3 digit F = 1 % M = 1.0 %/1000 h B14 = tin / lead, bulk Blank = standard RLR07 weldable significant G = 2 % P = 0.1 %/1000 h BSL = tin / lead, bulk, (dash number) RLR20 figure, R = 0.01 %/1000 h (up to 3 digits) single lot date code RLR32 followed by S = 0.001 %/1000 h From 1 to 999 R36 = tin/lead, a multiplier as applicable T/R (full, except 32s) Use R for 1 = hot solder R64 = tin / lead, values < 100 dip (32s) T/R (full 32s only) 1R00 = 1 11 = hot solder RE6 = tin / lead, 3302 = 33 k dip (20s) T/R (1000 pieces) 1005 = 10 M 19 = hot solder RSL = tin / lead, T/R, dip (05s) single lot date code 23 = hot solder dip (07s) Historical Part Number Example: RLR07C3001FR (will continue to be accepted) RLR07 C 3001 F R R36 MIL STYLE LEAD MATERIAL RESISTANCE VALUE TOLERANCE CODE FAILURE RATE PACKAGING Note For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc 31544) DIMENSIONS in inches (millimeters) (1) A E C D (Max.) B Note (1) Lead length for product in bulk pack. For product supplied in tape and reel, the actual lead length would be based on the body size, tape spacing and lead trim VISHAY DALE MODEL A B C (Max.) D E 0.150 0.020 0.066 0.008 0.187 0.016 0.002 1.25 0.266 ERL05 (3.81 0.51) (1.68 0.21) (4.75) (0.41 0.05) (31.75 6.76) 0.250 + 0.031 - 0.046 0.090 0.008 0.300 0.025 0.002 1.50 0.125 ERL07 (6.35 + 0.79 - 1.17) (2.29 0.21) (7.62) (0.64 0.05) (38.10 3.18) 0.375 0.041 0.138 0.023 0.450 0.032 0.002 1.50 0.125 ERL20 (9.53 1.04) (3.51 0.58) (11.43) (0.81 0.05) (38.10 3.18) 0.562 0.031 0.190 0.015 0.625 0.032 + 0.002 - 0.001 1.50 0.125 ERL32 (14.27 0.79) (4.83 0.38) (15.87) (0.81 + 0.05 - 0.03) (38.10 3.18) 0.562 + 0.031 - 0.042 0.230 0.015 0.650 0.032 + 0.002 - 0.001 1.50 0.125 ERL62 (14.27 + 0.79 - 1.07) (5.84 0.38) (16.51) (0.81 + 0.05 - 0.03) (38.10 3.18) APPLICABLE MIL-SPECIFICATIONS MATERIAL SPECIFICATIONS MIL-PRF-39017: Element Vacuum-deposited nickel-chrome alloy The ERL series meets the electrical, environmental an d Core Fire-cleaned high purity ceramic dimensional requirements of MIL-PRF-39017. Encapsulation Specially formulated epoxy compound MIL-PRF-22684: Standard lead material is solder-coated MIL-PRF-39017 supercedes MIL-PRF-22684 on new Termination copper. Solderable and weldable per designs. The ERL series meet or exceed MIL-PRF-22684 MIL-STD-1276, Type C. requirements. Documentation: POWER RATING Qualification and failure rate verification test data is maintained by Vishay Dale and is available upon request. Power ratings are based on the following two conditions: Lot traceability and identification data is maintained by 1. 2.0 % maximum R in 2000 h load life Vishay Dale for five years. 2. +150 C maximum operating temperature CAGE CODE: 91637 Revision: 13-Oct-2020 Document Number: 31023 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000