ERC (Military RNC/RNR) www.vishay.com Vishay Dale Metal Film Resistors, Axial, Military/Established Reliability, MIL-PRF-55182 Qualified, Precision, Type RNC, Characteristics J, H, K FEATURES Meets requirements of MIL-PRF-55182 Very low noise (-40 dB) Verified failure rate (contact factory for current level) 100 % stabilization and screening tests. Group A testing, if desired, to customer requirements Controlled temperature coefficient Epoxy coating provides superior moisture protection Standard lead on RNC product is solderable and weldable Traceability of materials and processing Monthly acceptance testing Vishay Dale has complete capability to develop specific reliability programs designed to customer requirements Extensive stocking program at distributors and factory on RNC50, RNC55, RNC60 and RNC65 For MIL-PRF-55182 characteristics E and C product, see Vishay Angstrohms HDN (Military RNR/RNN) datasheet (www.vishay.com/doc 66001) STANDARD ELECTRICAL SPECIFICATIONS POWER POWER MAXIMUM MIL RESISTANCE TEMPERATURE LIFE (4) GLOBAL MIL-PRF-55182 RATING RATING TOLERANCE WORKING SPEC. RANGE COEFFICIENT FAILURE (2) MODEL STYLE P P % VOLTAGE 70 C 125 C (1) SHEET ppm/C RATE W W V ERC50, M, P, RNC50, RNR50 07 0.10 0.05 0.1, 0.5, 1 200 10 to 796K 100 (K), 50 (H), 25 (J) (3) ERC50..31 R, S ERC55, M, P, RNC55, RNR55 01 0.125 0.10 0.1, 0.5, 1 200 10 to 2M 100 (K), 50 (H), 25 (J) (3) R, S ERC55..65 M, P, 10 to 2M 100 (K), 50 (H), 25 (J) ERC55..200, R, S RNC60, RNR60 03 0.25 0.125 0.1, 0.5, 1 250 (3) ERC55..201 2.01M to 3.01M 100 (K), 50 (H), 25 (J) M ERC65, M, P, RNC65, RNR65 05 0.50 0.25 0.1, 0.5, 1 300 10 to 3.01M 100 (K), 50 (H), 25 (J) (3) ERC65..65 R ERC70 M, P, RNC70, RNR70 06 0.75 0.50 0.1, 0.5, 1 350 10 to 3.01M 100 (K), 50 (H), 25 (J) (3) R ERC70..4 Notes (1) Consult factory for current QPL failure rates. (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (3) Hot solder dipped leads. (4) Tolerance of 0.1 % is not applicable to characteristics K. TECHNICAL SPECIFICATIONS PARAMETER UNIT CONDITION Voltage Coefficient, max. ppm/V 5/V when measured between 10 % and full rated voltage Dielectric Strength V RNC50, RNC55 and RNC60 = 450 RNC65 and RNC70 = 900 AC 11 9 Insulations Resistance 10 dry 10 after moisture test Operating Temperature Range C -65 to +175 Terminal Strength lb 2 lb pull test on RNC50, RNC55, RNC60 and RNC65 4.5 lb pull test on RNC70 Solderability Continuous satisfactory coverage when tested in accordance with MIL-STD-202, method 208 Weight g RNC50 = 0.11 RNC55 = 0.35 RNC60 = 0.35 RNC65 = 0.84 RNC70 = 1.06 Revision: 16-Sep-16 Document Number: 31025 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000ERC (Military RNC/RNR) www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RNC55H2152FRR36 (preferred part numbering format) R NC55 H2F152 RR36 RESISTANCE TOLERANCE FAILURE MIL STYLE CHARACTERISTICS PACKAGING SPECIAL VALUE CODE RATE RNC = solderable/ J = 25 ppm 3 digit B = 0.1 % M = 1.0 %/1000 h B14 = tin/lead, bulk Blank = standard weldable H = 50 ppm significant D = 0.5 % P = 0.1 %/1000 h BSL = tin/lead, bulk, (Dash number) RNR = solderable K = 100 ppm figure, F = 1 % R = 0.01 %/1000 h (Up to 3 digits) single lot date code only followed by S = 0.001 %/1000 h From 1 to 999 R36 = tin/lead, (see Standard a multiplier as applicable T/R (full 50, 55, 60) Use R for 4 = hot solder Electrical R64 = tin/lead, dip (70s) values < 100 Specifications T/R (full 65, 70) 31 = hot solder 10R0 = 10 table) RE6 = tin/lead, dip (50s) 2152 = 21.5 k T/R (1000 pieces) 65 = hot solder 3014 = 3.01 M RSL = tin/lead, T/R, dip (55s, 65s) single lot date code 201 = hot solder dip (60s) Historical Part Number Example: RNC55H2152FR R36 (will continue to be accepted) RNC55 H 2152 F R R36 MIL STYLE CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE FAILURE RATE PACKAGING Note For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc 31544). DIMENSIONS in inches (millimeters) (1) A E C D (Max.) B Note (1) Lead length for product in bulk pack. For product supplied in Tape and Reel, the actual lead length would be based on the body size, tape spacing and lead trim. VISHAY DALE MIL-PRF-55182 C AB DE MODEL STYLE (MAX.) RNC50, 0.150 0.020 0.070 0.010 0.187 0.016 0.002 1.25 0.266 ERC50 RNR50 (3.81 0.51) (1.78 0.25) (4.75) (0.41 0.05) (31.75 6.76) RNC55, 0.250 + 0.031 - 0.046 0.094 0.012 0.300 0.025 0.002 1.50 0.125 ERC55 RNR55 (6.35 + 0.79 - 1.17) (2.39 0.30) (7.62) (0.64 0.05) (38.1 3.18) RNC60, 0.280 0.020 0.097 0.012 0.350 0.025 0.002 1.50 0.125 ERC55..200 RNR60 (7.11 0.51) (2.46 0.30) (8.89) (0.64 0.05) (38.1 3.18) RNC65, 0.562 0.031 0.180 0.015 0.687 0.025 0.002 1.50 0.125 ERC65 RNR65 (14.27 0.79) (4.57 0.38) (17.45) (0.64 0.05) (38.1 3.18) RNC70, 0.562 0.031 0.180 0.015 0.687 0.032 0.002 1.50 0.125 ERC70 RNR70 (14.27 0.79) (4.57 0.38) (17.45) (0.81 0.05) (38.1 3.18) APPLICABLE MIL-SPECIFICATIONS MATERIAL SPECIFICATIONS MIL-PRF-55182: Element Vacuum-deposited nickel-chrome alloy The ERC series meets the electrical, environmental and dimensional requirements of MIL-PRF-55182. Core Fire-cleaned high purity ceramic MIL-R-10509: Encapsulation Specially formulated epoxy compound MIL-PRF-55182 supersedes MIL-R-10509 on new designs. The ERC series meets or exceeds MIL-R-10509 Standard lead material is solder-coated requirements. Termination copper. Solderable and weldable per DOCUMENTATION: MIL-STD-1276, type C Qualification and failure rate verification test data is maintained by Vishay Dale and is available upon request. POWER RATING Lot traceability and identification data is maintained by Power ratings are based on the following two conditions: Vishay Dale for five years. 1. 2.0 % maximum R in 10 000 h load life 2. +175 C maximum operating temperature CAGE CODE: 91637 Revision: 16-Sep-16 Document Number: 31025 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000