ROX Vishay Dale Metal Oxide Resistors, Special Purpose, High Voltage FEATURES Low TCR: 200 ppm/C standard 100 ppm/C, 50 ppm/C available Tolerances: 1 %, 2 %, 5 %, 10 % High Voltage (up to 45 kV) For oil bath or open air operation Matched sets available Special testing available upon request Compliant to RoHS directive 2002/95/EC STANDARD ELECTRICAL SPECIFICATIONS (2) POWER RATING RESISTANCE RANGE VOLTAGE GLOBAL HISTORICAL RATING P P P 25 C 70 C 125 C (3) MODEL MODEL 200 ppm 100 ppm 50 ppm NON-INDUCTIVE (1) (1) (1) V W W W ROX050 ROX-1/2 2.0 1.4 1.0 2 kV 1K to 1G 1K to 100M 1M to 100M - ROX075 ROX-3/4 3.0 2.16 1.5 5 kV 1K to 3G 1K to 500M 1M to 100M 100R to 1M ROX100 ROX-1 4.0 2.88 2.0 7.5 kV 1K to 3G 1K to 500M 1M to 100M 100R to 1M ROX150 ROX-1-1/2 5.0 3.6 2.5 11 kV 1K to 3G 1K to 500M 1M to 100M 100R to 1M ROX200 ROX-2 6.0 4.32 3.0 15 kV 1K to 3G 1K to 1G 1M to 500M 100R to 1M ROX300 ROX-3 10.0 7.2 5.0 22.5 kV 1K to 3G 1K to 1G 1M to 500M 400R to 10M ROX400 ROX-4 12.0 8.64 6.0 30 kV 1K to 3G 1K to 1G 1M to 500M 500R to 10M ROX500 ROX-5 16.0 11.52 8.0 37.5 kV 1K to 3G 1K to 1G 1M to 500M 500R to 10M ROX600 ROX-6 20.0 14.4 10.0 45 kV 1K to 3G 1K to 1G 1M to 500M 500R to 10M Notes (1) Increase wattage by 40 % for 0.040 1.02 mm diameter leads (2) For resistance values above and below those listed please contact us (3) Non inductive 200 ppm/C TCR only All resistance values are calibrated at 100 V . Calibration at other voltages available. DC 1 % not available above 1 G Part marking: Print marked - DALE, model, value, tolerance, temperature coefficient, date code TECHNICAL SPECIFICATIONS PARAMETER UNIT ROX050 ROX075 ROX100 ROX150 ROX200 ROX300 ROX400 ROX500 ROX600 11 Insulation Resistance 10 Category Temperature Range C Epoxy coated = - 55/+ 180 Silicone coated = - 55/+ 230 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: ROX300100MGNF5 (preferred part numbering format) R O X3 0 010 0 M G N F 5 GLOBAL RESISTANCE TOLERANCE TEMP. (4) CONSTRUCTION SPECIAL PACKAGING MODEL VALUE CODE COEFFICIENT (See Electrical R = Decimal F = 1 % H = 50 ppm EL = Lead (Pb)-free, Lacer (Up to 2 digits) Blank = Standard Specifications Blank = Standard (Dash number) K = Thousand G = 2 % K = 100 ppm EE = Lead (Pb)-free, table) M = Million J = 5 % N = 200 ppm N (Up to 3 digits) = Non-inductive T/R (1000 pieces) EM = Lead (Pb)-free, Foam G = Billion K = 1 0 % P = 0.040 leads From 1 to 999 as applicable 910R = 910 LB = Tin/Lead, Lacer S = Solid Body, Axial 10M0 = 10 M RF = Tin/Lead, T =Threaded Terminals 1G00 = 1.0 G Y = One end Axial, one T/R (1000 pieces) Threaded Terminal F5 = Tin/Lead, Foam Historical Part Number example: ROX-3100MGN (will continue to be accepted) ROX-3 100M G N F05 HISTORICAL RESISTANCE TOLERANCE TEMP. CONSTRUCTION PACKAGING MODEL VALUE CODE COEFFICIENT Notes (4) Some packaging codes are model specific. * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com For technical questions, contact: ff2bresistors vishay.com Document Number: 31033 182 Revision: 15-Apr-09ROX Metal Oxide Resistors, Special Purpose, High Voltage Vishay Dale DIMENSIONS Styles N, P and S Style P has 0.040 1.02 diameter leads. 0.032 0.002 0.81 0.05 Dia. 0.310 7.87 Max. Dia. 1.50 A 38.10 B Style Y Style T C 0.032 0.81 Dia. UNC 6-32 2B C UNC 6-32 2B Max. 1.500 0.330 8.38 Max. Dia. 38.10 0.330 8.38 Max. Dia. DIMENSIONS in inches millimeters GLOBAL STYLE N, P, S STYLE T STYLE Y MODEL AB C C MAX. ROX050 0.550 0.032 13.97 0.81 0.700 17.78 N/A N/A ROX075 0.800 0.032 20.32 0.81 0.900 22.86 1.168 0.022 29.72 0.56 1.050 26.67 ROX100 0.920 0.032 23.37 0.81 1.020 25.91 1.288 0.022 32.77 0.56 1.170 29.72 ROX150 1.550 0.032 39.37 0.81 1.650 41.91 1.918 0.022 48.77 0.56 1.800 45.72 ROX200 2.050 0.032 52.07 0.81 2.150 54.61 2.418 0.022 61.47 0.56 2.300 58.42 ROX300 3.050 0.032 77.47 0.81 3.150 80.01 3.418 0.022 86.87 0.56 3.300 83.82 ROX400 4.050 0.032 102.87 0.81 4.150 105.41 4.418 0.022 112.27 0.56 4.300 109.22 ROX500 5.050 0.032 128.27 0.81 5.150 130.81 5.418 0.022 137.67 0.56 5.300 134.62 ROX600 6.050 0.032 153.67 0.81 6.150 156.21 6.418 0.022 163.07 0.56 6.300 160.02 120 MECHANICAL SPECIFICATIONS 100 Terminal Strength 10 pound pull test 80 60 SILICONE COATING 40 Continuous satisfactory coverage Solderability when tested in accordance with 20 EPOXY COATING + 230 C MIL-STD-202, Method 208 0 0 50 100 150 200 250 AMBIENT TEMPERATURE IN C DERATING MATERIAL SPECIFICATIONS Element High temperature fired cermet film Core High purity 96 % alumina, tubular or solid Coating Blue flame-retardant epoxy on ROX050 thru ROX200. Black flameproof silicone on ROX300 thru ROX600 Standard lead material is solder - coated copper solderable and weldable. Termination 0.032 0.813 mm Style P 0.040 1.02 mm available 0 - 5 - 10 7 8 9 10 10 10 10 10 - 1/2 - 3, - 4 - 3/4, - 1 - 5, - 6 - 1 1/2, - 2 RESISTANCE () VOLTAGE COEFFICIENT Document Number: 31033 For technical questions, contact: ff2bresistors vishay.com www.vishay.com Revision: 15-Apr-09 183 % RATED POWER AVERAGE V.C., PPM/V