RT100 www.vishay.com Vishay Sfernice Wirewound Rheostat / Potentiometer FEATURES 100 W at 25 C CCTU 05-03B (PA5) Vitreous style Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 DIMENSIONS in millimeters PANEL CUT OUT DETAILS RT100-P A5 85 3 6 2 holes 5 60 50 10.5 - 0 6 - 0. 05 A 10 47 Screw M4 54.5 4.5 18 10.5 56 25 2 AS 12.5 0.5 60 Mounting side STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RATED POWER LIMITING DIELECTRIC INSULATION TOLERANCE VARIATION LAW MODEL RANGE P ELEMENT VOLTAGE STRENGTH RESISTANCE 25 C (1) % STANDARD W V V RMS 3 RT100 1 to 15K 10 100 Linear 850 1500 10 M (500 V ) CC Note (1) On request: sectorial winding CLIMATIC SPECIFICATIONS MECHANICAL SPECIFICATIONS Temperature range -55 C +320 C Mechanical protection Vitreous CCTU 454 Mechanical travel 300 5 Climatic category CEI 55 / 200 / 56 Operating torque 4 Ncm to 20 Ncm End stop torque 100 Ncm Unit weight 400 g Revision: 24-Aug-16 Document Number: 50028 1 For technical questions, contact: sferfixedresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RT100 www.vishay.com Vishay Sfernice LOCKING DEVICE PARTICULAR CHARACTERISTICS Supplied as an option the spindle locking device can only be NOMINAL MAX. SERVICE MAX. CURRENT fitted to units with control mounting and locating peg. RESISTANCE VOLTAGE THROUGH WIPER The part A is removed (see drawing). V A The available spindle length is according to the panel 110 10 thickness. 1.5 12.2 8.16 Order reference: DBA6 2.2 14.8 6.74 PANEL CUT OUT DETAILS 3.3 18.2 5.50 4.5 1 0.2 4.7 21.7 4.61 6.8 26.1 3.84 2 tightening screws 10 31.6 3.16 Spanner n 14 15 38.7 2.58 12.5 0.5 22 46.9 2.13 33 57.4 1.74 Max. panel Thickness 6.5 47 68.6 1.46 68 82.5 1.2 10.5 100 100 1 150 122 0.816 SPINDLES 220 148 0.674 DISTANCE TO MOUNTING SCREW DRIVER CODE 330 182 0.550 mm PLATE mm SLOT 470 217 0.461 Without AD 22 680 261 0.384 With ADF 1K 316 0.316 6 With ASF 1.5K 387 0.258 25 Without AL 2.2K 469 0.213 50 Without AS 3.3K 574 0.174 4.7K 686 0.146 Note For any special requirement on request: spindle flats, etc. Please 6.8K 825 0.121 supply detailed drawing. 10K 850 0.085 15K 850 0.057 COMMAND KNOB 41JF (OPTION) DIAL CG78 (OPTION) 4 holes 3.5 2 holes 4.5 21 5 4 6 12 3 7 6 2 65 78 8 56 1 9 0 10 18 47 65 78 MARKING Vishay Sfernice trademark, series, style, ohmic value (in or k ), tolerance (in %), maximum current in A, manufacturing date. Revision: 24-Aug-16 Document Number: 50028 2 For technical questions, contact: sferfixedresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000