RTOP www.vishay.com Vishay Sfernice Power Resistors for Mounting Onto a Heatsink Thick Film Technology FEATURES 1 % tolerance available High power rating = 200 W Wide ohmic value range = 0.046 to 1 M Non inductive Easy mounting Low thermal radiation of the case Standard isotope case (SOT-227 B) Material categorization: for definitions of compliance DESIGN SUPPORT TOOLS click logo to get started please see www.vishay.com/doc 99912 Models Available This series of thick film power resistors include modules which can incorporate up to 2 different resistor values in the same SOT-227B package. Two types of terminations are available along with a 4 terminal device for measurement applications in the case of the single resistor version. This product range benefits from Vishay Sfernices experience in thick film power resistor technology i.e. high power: volume ratio, low tolerance or individual resistors and excellent overload capabilities (due to the trimming technique). DIMENSIONS in millimeters RTOP V Connections 15 0.3 38 30 12.6 10 4 12.6 4.2 25 Note Tolerances unless otherwise specified: 0.3 mm STANDARD ELECTRICAL SPECIFICATIONS RATED POWER TEMPERATURE RESISTANCE RANGE TOLERANCE MODEL SIZE P COEFFICIENT 25 C % W ppm/C DRTOP50 0.091 to 1M 50 1, 2, 5, 10 150, 300 RTOP100 0.046 to 1M 100 1, 2, 5, 10 150, 300 SOT-227B DRTOP100 0.046 to 1M 200 1, 2, 5, 10 150, 300 RTOP200 MECHANICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Mechanical Protection Insulated case Temperature Range -55 C to +125 C Resistive Element Cermet Climatic Category 55 / 125 / 56 Substrate Alumina on insulated base End Connections V connections: screw M4 x 6 TECHNICAL SPECIFICATIONS Tightening Torque Connections 1 Nm Temperature Coefficient 300 ppm/C (R < 1) Standard (-55 C to +125 C) 150 ppm/C (R > 1) Tightening Torque Heatsink 2 Nm 6 Insulation Resistance > 10 M Weight 30 g max. Revision: 06-Apr-18 Document Number: 50045 1 For technical questions, contact: sferfixedresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RTOP www.vishay.com Vishay Sfernice PERFORMANCE TESTS CONDITIONS REQUIREMENTS IEC 60115-1 Momentary Overload < (0.25 % + 0.05 ) 2.5 Pr/5 s U < 2 U S L IEC 60115-1 Rapid Temperature Change < (0.25 % + 0.05 ) 5 cycles, -55 C, +125 C IEC 60115-1 Load Life < (0.5 % + 0.05 ) Pr at 25 C, 1000 h IEC 60115-1 / IEC 60068-2-3 Test Ca Humidity (Steady State) < (0.5 % + 0.05 ) 56 days, 95 % RH / 40 C SPECIAL FEATURES MODEL RTOP 200 RTOP 100 DRTOP 100 DRTOP 50 Power Rating at +25 C Chassis Mounted Resistors 200 W 100 W 100 W 50 W Unmounted Resistors 5 W 5 W 3.5 W 3.5 W Thermal Resistance (per Resistor) 0.5 C/W 1 C/W 0.5 C/W 1 C/W Limiting Voltage U 1500 V 1500 V 500 V 500 V L (1) Dielectric Strength 2500 V, 1 min 2500 V, 1 min 2500 V, 1 min 2500 V, 1 min Connections/Chassis 10 mA max. 10 mA max. 10 mA max. 10 mA max. (1) Dielectric Strength 2500 V, 1 min 2500 V, 1 min - - Connections/Resistors 10 mA max. 10 mA max. Ohmic Value Range 0.046 to 1 M 0.091 to 1 M Tolerance 1 % to 10 % 1 % to 10 % R2 R R1 Electrical Diagrams R Shunt version Note (1) MIL-STD-202 Method 301 Revision: 06-Apr-18 Document Number: 50045 2 For technical questions, contact: sferfixedresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000