SE15PJ-M3/84A Vishay

333 3 SE15PB, SE15PD, SE15PG, SE15PJ www.vishay.com Vishay General Semiconductor Surface Mount ESD Capability Rectifiers FEATURES eSMP Series Very low profile - typical height of 1.0 mm Ideal for automated placement Oxide planar chip junction Low forward voltage drop Typical I less than 0.1 A R ESD capability Meets MSL level 1, per J-STD-020, SMP (DO-220AA) LF maximum peak of 260 C AEC-Q101 qualified Cathode Anode Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 ADDITIONAL RESOURCES TYPICAL APPLICATIONS 3D Models General purpose, polarity protection, and rail-to-rail protection in both consumer and automotive applications. PRIMARY CHARACTERISTICS MECHANICAL DATA I 1.5 A F(AV) Case: SMP (DO-220AA) V 100 V, 200 V, 400 V, 600 V Molding compound meets UL 94 V-0 flammability rating RRM Base P/N-M3 - halogen-free, RoHS-compliant, and I 5 A R commercial grade V at I = 1.0 A 0.868 V F F Base P/NHM3 - halogen-free, RoHS-compliant, and T max. 175 C J automotive grade Package SMP (DO-220AA) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 Circuit configuration Single M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL SE15PB SE15PD SE15PG SE15PJ UNIT Device marking code 15B 15D 15G 15J Max. repetitive peak reverse voltage V 100 200 400 600 V RRM Average forward current (fig. 1) I 1.5 A F(AV) Peak forward surge current 10 ms single half I 30 A FSM sine-wave superimposed on rated load Operating junction and storage temperature range T , T -55 to +175 C J STG Revision: 20-Feb-2020 Document Number: 89025 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D SE15PB, SE15PD, SE15PG, SE15PJ www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A PARAMETER TEST CONDITIONS SYMBOL TYP. MAX. UNIT T = 25 C 0.968 1.05 Max. instantaneous A (1) I = 1.5 A V V F F forward voltage T = 125 C 0.868 0.95 A T = 25 C -5.0 A (2) Max. reverse current Rated V I A R R T = 125 C 5.4 50 A I = 0.5 A, I = 1.0 A, F R Max. reverse recovery time t 900 - ns rr I = 0.25 A rr Typical junction capacitance 4.0 V, 1 MHz C 9.5 - pF J Notes (1) Pulse test: 300 s pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (T = 25 c unless otherwise noted) A PARAMETER SYMBOL SE15PB SE15PD SE15PG SE15PJ UNIT (1) R 105 JA (1) Typical thermal resistance R 25 C/W JL (1) R 30 JC Note (1) Thermal resistance from junction to ambient and junction to lead mounted on PCB with 5.0 mm x 5.0 mm copper pad areas. R - i s JL measured at the terminal of cathode band. R is measured at the top center of the body. JC IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS (T = 25 C unless otherwise noted) A STANDARD TEST TYPE TEST CONDITIONS SYMBOL CLASS VALUE AEC-Q101-001 Human body model (contact mode) C = 100 pF, R = 1.5 k H3B > 8 kV AEC-Q101-002 Machine model (contact mode) C = 200 pF, R = 0 M4 > 400 V JESD22-A114 Human body model (contact mode) C = 100 pF, R = 1.5 k 3B > 8 kV V C JESD22-A115 Machine model (contact mode) C = 200 pF, R = 0 C > 400 V Human body model (contact mode) C = 150 pF, R = 330 4> 8 kV (2) IEC 61000-4-2 (1) Human body model (air-discharge mode) C = 150 pF, R = 330 4 > 15 kV Notes (1) Immunity to IEC 61000-4-2 air discharge mode has a typical performance > 30 kV (2) System ESD standard ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SE15PJ-M3/84A 0.024 84A 3000 7 diameter plastic tape and reel SE15PJ-M3/85A 0.024 85A 10 000 13 diameter plastic tape and reel (1) SE15PJHM3/84A 0.024 84A 3000 7 diameter plastic tape and reel (1) SE15PJHM3/85A 0.024 85A 10 000 13 diameter plastic tape and reel Note (1) Automotive grade Revision: 20-Feb-2020 Document Number: 89025 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000