SFH1617A www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5000 V , 110 C Rated RMS FEATURES Operating temperature from - 55 C to + 110 C Good CTR linearity depending on forward current Isolation test voltage, 5000 V 1 4 RMS A C High collector emitter voltage, V = 70 V CEO 2 3 C E Low saturation voltage Fast switching times Low CTR degradation Temperature stable Low coupling capacitance 17918-20 End stackable, 0.100 (2.54 mm) spacing DESCRIPTION High common mode interference immunity The 110 C rated SFH1617A (DIP) feature a high current Material categorization: for definitions of compliance transfer ratio, low coupling capacitance and high isolation please see www.vishay.com/doc 99912 voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor APPLICATIONS detector, and is incorporated in a plastic DIP-4 package. AC adapter The coupling devices are designed for signal transmission SMPS between two electrically separated circuits. PLC The couplers are end-stackable with 2.54 mm spacing. Factory automation Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with Game consoles IEC 60950 (DIN VDE 0805) for reinforced insulation up to an operation voltage of 400 V or DC. Specifications subject AGENCY APPROVALS RMS to change. UL1577, file no. E52744 cUL tested to CSA 22.2 bulletin 5A DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 (pending) available with option 1 BSI EN 60950 EN 60065 FIMKO CQC (pending) ORDERING INFORMATION DIP-4 Option 6 S F H 1 617 A - X 0 T 7.62 mm 10.16 mm PART NUMBER CTR PACKAGE OPTION TAPE BIN AND Option 7 REEL > 8 mm AGENCY CERTIFIED/PACKAGE CTR (%) UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320 DIP-4 - SFH1617A-2 SFH1617A-3 - VDE, UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320 DIP-4, 400 mil, option 6 - - SFH1617A-3X016 - SMD-4, option 7 - SFH617A-2X017T - - Note Additional options may be possible, please contact sales office Rev. 2.1, 10-May-17 Document Number: 83552 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 SFH1617A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V 6.0 V R DC forward current I 60 mA F Surge forward current t 10 s I 2.5 A FSM LED power dissipation P 70 mW diss OUTPUT Collector emitter voltage V 70 V CEO Emitter collector voltage V 7.0 V ECO Collector current I 50 mA C Collector peak current t /T = 0.5, t 10 ms I 100 mA p p CM Output power dissipation P 150 mW diss COUPLER Isolation test voltage between emitter and detector, refer to V 5000 V ISO RMS climate DIN 40046, part 2, Nov. 74 12 V = 500 V, T = 25 C R 10 IO amb IO Isolation resistance 11 V = 500 V, T = 100 C R 10 IO amb IO Storage temperature range T -55 to +150 C stg Ambient temperature range T -55 to +110 C amb (1) Soldering temperature 2 mm from case, 10 s T 260 C sld Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP) ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I = 60 mA V - 1.35 1.65 V F F Reverse current V = 6.0 V I -0.01 10A R R Capacitance V = 0 V, f = 1.0 MHz C -13- pF R O OUTPUT Collector emitter capacitance V = 5.0 V, f = 1.0 MHz C -5.2 - pF CE CE SFH1617A-1 I -2.0 50 nA CEO SFH1617A-2 I -2.0 50 nA CEO Collector emitter leakage V = 10 V CE current SFH1617A-3 I -5.0 100 nA CEO SFH1617A-4 I -5.0 100 nA CEO COUPLER Collector emitter saturation I = 10 mA, f = 1.0 MHz V - 0.25 0.4 V F CEsat voltage Coupling capacitance C -0.4 - pF C Note Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements Rev. 2.1, 10-May-17 Document Number: 83552 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000