Alternative Device Available SFH1690AT, SFH1690BT, SFH1690CT, SFH1690ABT www.vishay.com Vishay Semiconductors Optocoupler Phototransistor Output, SOP-4, Mini-Flat Package, 110 C Rated FEATURES Operating temperature from - 55 C to + 110 C SOP (small outline package) A 1 4 C Isolation test voltage, 3750 V (1 s) RMS Low saturation voltage 2 C 3 E Fast switching times Available Low coupling capacitance End-stackable, 0.100 (2.54 mm) spacing i179066 Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS DESCRIPTION PLCs The 110 C rated SFH1690AT, SFH1690BT, SFH1690CT, Telecommunication and SFH1690ABT family has a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar AGENCY APPROVALS phototransistor detector, and is incorporated in a 4 pin UL1577, file no. E52744 system code U 100 mil lead pitch miniflat package. It features a high current transfer ratio, low coupling capacitance, and high isolation cUL - file no. E52744, cUL tested to CSA 22.2 bulletin 5A voltage. DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 The coupling devices are designed for signal transmission (pending) available with option 1 between two electrically separated circuits. The SFH1690 BSI tested to IEC 60065 and IEC 60950-2001 series is available only on tape and reel. There are 2000 parts per reel. ORDERING INFORMATION S F H 1 690 T - X 001 SOP- PART NUMBER TAPE VDE OPTION AND 7.21 mm REEL AGENCY CERTIFIED/PACKAGE CTR (%) UL, cUL, BSI 50 to 300 50 to 150 100 to 300 100 to 200 SOP-4, Mini flat SFH1690ABT SFH1690AT SFH1690BT SFH1690CT VDE, UL, cUL, BSI 50 to 300 50 to 150 100 to 300 100 to 200 SOP-4, Mini flat - - SFH1690BT-X001 - Note For additional information on the available options refer to option information. Rev. 2.1, 23-May-13 Document Number: 83537 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000Alternative Device Available SFH1690AT, SFH1690BT, SFH1690CT, SFH1690ABT www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT DC forward current I 50 mA F Reverse voltage V 6V R Surge forward current t 10 s I 2.5 A p FSM Power dissipation P 80 mW diss Derate linearly from 25 C 0.7 mW/C OUTPUT Collector emitter voltage V 70 V CEO Emitter collector voltage V 7V ECO I 50 mA C Collector current t 1 ms I 100 mW p C Power dissipation P 150 mW diss Derate linearly from 25 C 1.5 mW/C COUPLER Isolation test voltage between emitter t = 1 s V 3750 V ISO RMS and detector Operating temperature range T - 55 to + 110 C amb Storage temperature range T - 55 to + 150 C stg max. 10 s dip soldering distance to Soldering temperature T 260 C sld seating plane 1.5 mm Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. 175 150 Phototransistor 125 100 75 Diode 50 25 0 0 20 40 60 80 100 120 T - Ambient Temperature (C) 17567 amb Fig. 1 - Permissible Power Dissipation vs. Temperature Rev. 2.1, 23-May-13 Document Number: 83537 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 P - Power Dissipation (mW) tot