SFH617A www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 V , 110 C Rated RMS FEATURES Operating temperature from -55 C to +110 C Good CTR linearity depending on forward current Isolation test voltage, 5300 V RMS High collector emitter voltage, V = 70 V CEO Low saturation voltage 1 4 A C Fast switching times Low CTR degradation 2 3 C E Temperature stable Low coupling capacitance End stackable, 0.100 (2.54 mm) spacing High common mode interference immunity Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 17918-20 APPLICATIONS DESCRIPTION AC adapter The 110 C rated SFH617A (DIP) feature a high current SMPS transfer ratio, low coupling capacitance and high isolation PLC voltage. These couplers have a GaAs infrared diode emitter, Factory automation which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 package. Game consoles The coupling devices are designed for signal transmission AGENCY APPROVALS between two electrically separated circuits. The couplers are end-stackable with 2.54 mm spacing. The safety application model number covering all products in this datasheet is SFH617A. This model number should be Creepage and clearance distances of > 8.0 mm are used when consulting safety agency documents. achieved with option 6. UL1577, file no. E52744 cUL tested to CSA 22.2 bulletin 5A DIN EN 60747-5-5 (VDE 0884-5) available with option 1 BSI IEC 60950 IEC 60065 FIMKO CQC ORDERING INFORMATION DIP-4 Option 6 SF H 6 1 7 A - X 0 T 7.62 mm 10.16 mm PART NUMBER CTR PACKAGE OPTION TAPE BIN AND Option 7 Option 9 REEL > 8 mm 8 mm typ. AGENCY CERTIFIED/PACKAGE CTR (%) UL, BSI, FIMKO, cUL 40 to 80 63 to 125 100 to 200 160 to 320 DIP-4 SFH617A-1 SFH617A-2 SFH617A-3 SFH617A-4 DIP-4, 400 mil, option 6 SFH617A-1X006 SFH617A-2X006 SFH617A-3X006 SFH617A-4X006 SMD-4, option 7 SFH617A-1X007T - SFH617A-3X007T - SMD-4, option 9 - SFH617A-2X009T - - VDE, UL, BSI, FIMKO, cUL 40 to 80 63 to 125 100 to 200 160 to 320 DIP-4 SFH617A-1X001 SFH617A-2X001 SFH617A-3X001 SFH617A-4X001 DIP-4, 400 mil, option 6 SFH617A-1X016 SFH617A-2X016 SFH617A-3X016 SFH617A-4X016 (1) SMD-4, option 7 - SFH617A-2X017T SFH617A-3X017T - (1) SMD-4, option 9 - SFH617A-2X019T -- Notes Additional options may be possible, please contact sales office. (1) Also available in tubes do not add T to end. Rev. 2.4, 31-Aug-15 Document Number: 83740 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 SFH617A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V 6V R Forward current I 60 mA F Forward surge current t 10 s I 2.5 A p FSM LED power dissipation at 25 C P 70 mW diss OUTPUT Collector emitter voltage V 70 V CEO Emitter collector voltage V 7V ECO Collector current I 50 mA C Collector peak current t /T = 0.5, t 10 ms I 100 mA p p CM Ouput power dissipation at 25 C P 150 mW diss COUPLER Operation temperature T - 55 to + 110 C amb Storage temperature range T - 55 to + 150 C stg (1) Soldering temperature 2 mm from case, 10 s T 260 C sld Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I = 60 mA V 1.35 1.65 V F F Reverse current V = 6 V I 0.01 10 A R R Capacitance V = 0 V, f = 1 MHz C 13 pF R O OUTPUT Collector emitter capacitance V = 5 V, f = 1 MHz C 5.2 pF CE CE SFH617A-1 I 250 nA CEO SFH617A-2 I 250 nA CEO Collector emitter leakage current V = 10 V CE SFH617A-3 I 5 100 nA CEO SFH617A-4 I 5 100 nA CEO COUPLER Collector emitter saturation voltage I = 10 mA, f = 1 MHz V 0.25 0.4 V F CEsat Coupling capacitance C 0.4 pF C Note Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Rev. 2.4, 31-Aug-15 Document Number: 83740 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000