SFH618A, SFH6186 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, Low Input Current FEATURES Good CTR linearity depending on forward current Low CTR degradation = 55 V High collector emitter voltage, V CEO A 1 4 C Isolation test voltage, 5300 V RMS Low coupling capacitance 2 3 C E End stackable, 0.100 (2.54 mm) spacing High common mode transient immunity 1 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Telecom i179061-1 1 Industrial controls DESCRIPTION Battery powered equipment The SFH618A (DIP) and SFH6186 (SMD) feature a high Office machines current transfer ratio, low coupling capacitance and high AGENCY APPROVALS isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to silicon planar The safety application model number covering all products phototransistor detector, and is incorporated in a plastic in this datasheet is SFH618A. This model number should be DIP-4 or SMD package. used when consulting safety agency documents. The coupling devices are designed for signal transmission UL1577 between two electrically separated circuits.The couplers are cUL end-stackable with 2.54 mm lead spacing. Creepage and CSA clearance distances of > 8 mm achieved with option 6. DIN EN 60747-5-5 (VDE 0884-5) available with option 1 BSI FIMKO ORDERING INFORMATION Option 6 DIP- SF H 6 1 8 - X 0 T 7.62 mm 10.16 mm PART NUMBER CTR PACKAGE OPTION TAPE BIN AND Option 7 Option 9 REEL > 0.1 mm > 0.7 mm CTR (%) AGENCY CERTIFIED/PACKAGE 1 mA UL, cUL 63 to 125 100 to 200 160 to 320 250 to 500 DIP-4 SFH618A-2 SFH618A-3 SFH618A-4 SFH618A-5 DIP-4, 400 mil, option 6 - SFH618A-3X006 - - (1) SMD-4, option 7 - - - SFH618A-5X007T (1) SFH6186-5T , (1) (1) (1) SMD-4, option 9 SFH6186-2T SFH6186-3T , SFH6186-3T1 SFH6186-4T SFH6186-5T1 VDE, UL, cUL 63 to 125 100 to 200 160 to 320 250 to 500 DIP-4 - SFH618A-3X001 SFH618A-4X001 - DIP-4, 400 mil, option 6 - SFH618A-3X016 SFH618A-4X016 SFH618A-5X016 (1) (1) SMD-4, option 7 - SFH618A-3X017T - SFH618A-5X017T (1) SFH6186-3X001T , (1) SMD-4, option 9 - SFH6186-4X001T SFH6186-5X001T SFH6186-3X001T1 Notes Additional options may be possible, please contact sales office (1) Also available in tubes, do not put T to the end Rev. 2.7, 21-Feb-18 Document Number: 83673 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 SFH618A, SFH6186 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V 6V R Power dissipation P 70 mW diss Forward current I 60 mA F OUTPUT Collector emitter voltage V 55 V CEO Emitter collector voltage V 7V ECO I 50 mA C Collector current t 1 ms I 100 mA p C Power dissipation P 150 mW diss COUPLER Storage temperature range T -55 to +150 C stg Ambient temperature range T -55 to +100 C amb Junction temperature T 125 C j max. 10 s, dip soldering distance Soldering temperature T 260 C sld to seating plane 1.5 mm Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability 200 150 Detector 100 LED 50 0 020 40 60 80 100 120 T - Ambient Temperature (C) amb Fig. 1 - Permissible Power Dissipation vs. Ambient Temperature Rev. 2.7, 21-Feb-18 Document Number: 83673 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 P - Power Dissipation (mW) tot
